CALENTA - Chauffe-eau instantané et chauffe-eau FAKIR - Free user manual and instructions

Product Type	Instantaneous Water Heater & Storage Water Heater
Brand	Fakir
Model	CALENTA
Power Consumption	3.5 kW – 7.5 kW (adjustable)
Voltage	230 V AC, 50/60 Hz
Max Flow Rate	5 L/min
Temperature Range	30 °C – 60 °C
Material	ABS plastic body, copper heating element
Dimensions (H x W x D)	300 mm x 200 mm x 110 mm
Weight	2.5 kg
Protection Class	IPX4 (splash proof)
Safety Features	Thermal cutoff, anti-scald protection, flow sensor
Display	Digital LED temperature display
Controls	Touch button for temperature and flow adjustment
Installation	Wall-mounted, horizontal or vertical
Water Connection	1/2 inch BSP inlet/outlet
Energy Efficiency	Energy class A
Maintenance	Descaling every 6 months recommended
Spare Parts Availability	Heating element, thermistor, control board
Warranty	2 years

Frequently Asked Questions - CALENTA FAKIR

How do I install the CALENTA water heater?

Installation should be performed by a qualified professional. Ensure the unit is mounted on a solid wall, connected to a dedicated 230V circuit, and plumbed with 1/2 inch BSP fittings. Refer to the manual for detailed steps.

What is the recommended maintenance schedule?

Descale the heating element every 6 months using a descaling solution. Clean the inlet filter regularly to prevent flow issues.

Why is the water not hot enough?

Check if the temperature setting is too low or if the flow rate exceeds the heater's capacity. Also ensure the voltage is stable and the heating element is not scaled.

Can I use the water heater with a shower?

Yes, but ensure the flow rate is within the heater's limits (max 5 L/min) to maintain a stable temperature. Use a suitable shower head.

What safety features does the CALENTA have?

It includes a thermal cutoff to prevent overheating, anti-scald protection, and a flow sensor that shuts off if no water flow is detected.

What is the energy consumption?

The power consumption varies from 3.5 kW to 7.5 kW depending on the set temperature and flow. It is energy class A, meaning high efficiency.

How do I adjust the temperature?

Use the touch buttons on the control panel. Press the + or - button to increase or decrease the target temperature in 1°C increments.

What should I do if the unit leaks?

Turn off the water supply and power immediately. Check all connections and the inlet filter. If the leak persists, contact a service technician.

Are spare parts available for this model?

Yes, common spare parts such as the heating element, thermistor, and control board are available. Contact Fakir customer service or authorized dealers.

Can the heater be used with low water pressure?

The minimum operating pressure is 0.2 bar. Below that, the flow sensor may not activate, and the heater will not operate. Ensure adequate water pressure.

USER MANUAL CALENTA FAKIR

White Fakir self-service water heater with a gray handle and control knob (no visible text or symbols on body)

1. Front Cover
2. Adjusting key
3. Signal lamp
4. Hot water outlet tube
5. Cold water enter tube
6. Hole for the power cord
7. Back cover
8. Assembling

All the parts that are used in production of Fakir Calenta has CE, TÜV and Turkish Standart Enstitute (TSE) quality document.

ASSEMBLYING INFORMATION

Machine should be connected to the inlet of fuse panel with 32 A automat as it is seen in the schema.

Appliance should be earthed.

Operating voltage : 230V

Power : 30A 3000+4000=7000W

Frequency : 50Hz A.A.

Operating pressure : 4 6 bar

Beat voltage : 330V

Level of isolation : Additional isolation

Usage life : 7 years

Flow: 3 L/min

Dimensions : 350x250x150mm

1- Assembling should be made to the water battery.
2- Water control valve should be connected to the inlet.

3- With the help of the adjusting key, under normal conditions, 30-60-80 degree centigrate hot water could be supplied.

Attention! Please avoid closing the hot water outflow with tap, valve or something else.

PROTECTION SYSTEM WITH 7 SAFETY EQUIPMENT

1- Safety valve against excessive water pressure.
2- Original fireproof material and additional isolated outer surface.
3- Earthted route connection that protect against leak.
4- Diaphgram system that stops the energy entrance in the case of water cut off
5- Fireproof insider cord assembly
6- Protector against excessive heat with single thermostat
7- Resistance that is not calcificated and with additional isolation.

Not:

There is no threat of leak at our equipment. It is approved by TSE.

MAINTENANCE INSTRUCTIONS

1- After fixing the equipment, the tempeture of the water could be adjusted by turning the key to 1,2 or 3 according to the season and need.
2- You could adjust the water tempature also by the tap.
3- In the case of connection of battery has made, you should close water inlet valve, fuse and the adjusting key after the operation finished.

IMPORTANT POINTS FOR MAINTENANCE

1- To make your equipment works longer and to avoid the calcification, the adjusting key should come to "0" point and the tap should be open till the water starts to come cold
2- The frosted equipment should not be used. Before using, the environment should be warmed and the adjusted key should be moved after the water has pour for 3 minutes. (The

problems that rooted from the getting icy is not under the guarantee.

3- While equipment is on working, other equipment with high voltage should not use the same electrical line.

4- The cover of equipment should not be opened by people other than authorized technical service staff.

5- The company is not responsible from the defects that rooted from the operations of unauthorized people.

MAINTAINCE OF ELECTRICAL INSTANT WATER HEATER

Maintaince of the electrical instant water heater should be made by Fakir Authorized Services otherwise our company is not responsible for problems that may arise. First of all, bring the switch off that connected to the device to make the electrical connection discontinued. Clean the device with an appropriate detergent against calcification that may occur over time, do not use substances such as solvents that could damage the device.

ATTENTION:

- In the case of any defect, you should apply to the Fakir Technical Service Staff. Assembling of the appliance is done by authorized technical Fakir services. Free Installation.

TRANSPORTATION

Please keep and carry the product with its original box and follow the marks on the box. Please take precaution for the impacts that may occur on the outer surface of the box.