E2100 - Environmental Thermometer Emos - Free user manual and instructions

Brand	Emos
Model	E2100
Product Type	Environmental Thermometer
Display Type	Digital
Indoor Temperature Range	-10°C to 50°C (14°F to 122°F)
Outdoor Temperature Range	-50°C to 70°C (-58°F to 158°F)
Accuracy	±1°C
Simultaneous Display	Indoor and outdoor temperatures
Memory Functions	Maximum and minimum temperature memory for indoor and outdoor
Memory Reset	Dedicated reset buttons for indoor and outdoor
Power Supply	1 × 1.5V LR44 (button cell)
Weight	0.050 kg (50 g)
Water Resistance	Outdoor sensor is water-resistant (not submersible)
Placement	Indoor unit: place indoors; outdoor sensor: place outdoors away from direct sun and moisture
Cleaning	Wipe with a soft damp cloth; do not use solvents
Operating Environment	Avoid extreme temperatures, shock, dust, and humidity
Battery Disposal	Dispose of batteries in an environmentally friendly manner

Frequently Asked Questions - E2100 Emos

How do I check the outdoor maximum or minimum temperature?

Press the button marked "out max-min". The first press shows the maximum temperature, the second press shows the minimum temperature since the last reset.

How do I reset the outdoor temperature memory?

Press the button marked "out reset" once to clear the stored maximum and minimum outdoor temperatures.

How do I check the indoor maximum or minimum temperature?

Press the button marked "in max-min". The first press shows the maximum temperature, the second press shows the minimum temperature since the last reset.

How do I reset the indoor temperature memory?

Press the button marked "in reset" once to clear the stored maximum and minimum indoor temperatures.

What type of battery does the E2100 use?

It uses one 1.5V LR44 button cell battery.

Can I use the E2100 outdoors?

The outdoor sensor is water-resistant and can be placed outdoors, but avoid direct rain or submersion. The indoor unit should be kept inside.

How accurate is the thermometer?

The accuracy is ±1°C within the specified temperature ranges.

How should I clean the thermometer?

Use a soft, damp cloth to clean the device. Do not use solvents, and avoid immersing it in water.

What should I do if the display is not working?

First, check the battery and replace if necessary. If the problem persists, contact the store where it was purchased for service.

How do I dispose of old batteries?

Dispose of batteries in an environmentally friendly manner, following local regulations. Take them to a collection point.

USER MANUAL E2100 Emos

Simultaneous display of outdoor and indoor temperatures

Temperature Measuring Range: Outdoor.

1. DEVER-TE

50℃, 60℃

±1℃ 1.0V(tpm)R44

POWER: Mavim

Maximum and minimum temperature memory function.

Thermometer Maximum and Minimum Memory

1. To check the outdoor maximum or minimum temperature, push the button marked "out max-min" to show the maximum or minimum temperature of the period from the last reset.

2. Reset the outdoor temperature memory by pressing the button marked "out reset" once.

3. To check the indoor maximum or minimum temperature, push the button marked "in max-min" to show the maximum or minimum temperature of the period from the last reset.

4. Reset the indoor temperature memory by pressing the button marked "in reset" once.

⚠️ Care and maintenance

The product is designed to serve you for years providing that you will handle it in the correct way. Here are some tips for correct handling:

- Do not expose the product to direct sunshine, extremely cold, damp conditions

or sudden temperature changes (it may reduce the accuracy of measuring).

- Do not place the product on places which may be subject of vibration or shaking. It may damage the product.

- Do not expose the product to excessive pressure, shock, dust, high temperature

of dampness – they may damage the product, its batteries of its plastic parts. Do not expose the product to rain or dampness; it is not designed for outside use.

- Do not expose the product to rain of dampness, it is not designed for outside use.

- Do not locate the product on a place without sufficient ventilation.

- Do not put any objects into the air holes.

- Do not correct or modify the internal circuit, it may be damaged. As a result of that warranty would be terminated. The product should be repaired by a qualified manner only.

• To clean the product use only damped soft cloth. Do not use any solvent; it may

damage the plastic parts.

- Do not sink the product into water or any other liquids.

- Do not expose the product to dripping or spraying water.

- DO NOT attempt to service any parts of this product. Refer all servicing to the store where the product had been bought.

- Keep out of reach of children. This product is not a toy

- Remove flat batteries. Leakage could damage the product. Use only new batteries

of the correct type. Make sure you put them according to right polarity.

- Do not dispose of accumulator in fire, do not disassemble or short circuit.

• Always dispose of batteries in an environmentally friendly way. Please take them to the point of purchase for environmentally friendly

take the disposal

The image is too blurry to recognize any text content.

[NO TEXT]

图

A

-

13.8.2005

TEPLOMĚR 02101

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

(IN) -10 °C do 50 °C

(OUT) -50 °C do 70 °C

±1 °C

[Non-Text]

vaniska vodootporna

baterije 1× 1,5V tip LR44

0,050 kg

Zapis minimalne i maksimalne temperature

1. Za čitanje podataka maksimalne ili minimalne vanjske temperature pritisnite tipku maks-min ispod natpisa Out. Nakon prvog pritiska prikaže se maksimalna vrijednost. Nakon drugog pritiska prikaže se minimalna vrijednost. Ove vrijednosti pohranjene su u memoriju od zadnieg resetiranja (nuliranje memorije).

2. Nuliranje vrijednosti maksimalne i minimalne vanjske temperature izvodi se pomoću tinke Reset ispod natrisa Out

3. Za čitanje podataka maksimalne ili minimalne unutrašnje temperature pritisnite tipku max-min ispod natpisa In. Nakon prvog pritiska prikaže se maksimalna vrijednost. Nakon drugog pritiska prikaže se minimalna vrijednost. Ove vrijednost, nečenje podataka maksimalne uškodnički je prejučnoj, nečenje podataka maksimalne vijednost.

nosti pohranjene su u memonju od zadnjeg resetiranja (nulliranje memorije). 4. Nuliranje vrijednosti maksimalne i minimalne unutrašnje temperature izvodi se

pomoću tipke Reset ispod natpisa In.

Njega i održavanje

The image contains no discernible text or characters.

13.8.2005

DE HERMOMETER 02101