Level PLUS VT30 - Tripod Levenhuk - Free user manual and instructions

Product Type	Tripod
Brand	Levenhuk
Model	Level PLUS VT30
Thread Size	1/4 inch
Leg Lock System	Flip lock
Center Column	Yes, with locking knob/ring
Bubble Level	Yes
Head Type	3-way pan/tilt head
Quick Release Plate	Yes, with plate-locking lever
Pan Bar Handle	Yes, reversible
Pan Lock	Yes (pan locking knob)
Tilt Lock	Yes (tilt locking knob/pan bar handle)
90° Positioning	Yes, with positioning knob
Warranty	6 months
Care Instructions	Do not exceed max load; avoid salt water, sun; store dry; protect from sand/dirt; use standard lubricant if needed

Frequently Asked Questions - Level PLUS VT30 Levenhuk

How to adjust the height of the Levenhuk Level PLUS VT30 tripod?

Loosen the center column locking knob/ring (3), set the column to the desired height, and tighten the knob/ring to lock.

How to mount a camera on the tripod?

Screw the camera to the quick release plate. Then squeeze and pull the plate-locking lever, mount the plate onto the tripod head groove, and release the lever to lock.

How to reverse the pan bar handle?

Loosen the pan bar handle locking knob, remove the handle, reattach it to the opposite side, and tighten the knob.

How to rotate the platform horizontally?

Loosen the pan locking knob (4), rotate the platform using the pan bar handle (2), then tighten the knob to lock.

How to tilt the platform vertically?

Loosen the pan bar handle (2) / tilt locking knob (5), tilt the head to the desired angle, then tighten the handle/knob.

What is the maximum load capacity of this tripod?

The manual does not specify the exact maximum load capacity. Always ensure the load is within reasonable limits and securely attached to avoid damage.

How to clean and maintain the tripod?

Protect the tripod from sand and dirt to prevent clogging locks and threads. Use standard lubricant if needed. Do not overtighten threads.

Can I use this tripod in salt water?

No, it is not recommended to use the tripod in salt water as it may cause damage.

How to store the tripod when not in use?

Store the tripod in a nylon bag in a dry place. Avoid prolonged exposure to sun or next to car windows.

What devices are compatible with this tripod?

This tripod is suitable for optical devices with a 1/4 inch thread, such as cameras, spotting scopes, and binoculars.

USER MANUAL Level PLUS VT30 Levenhuk

[Non-Text]
[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

EN LEVENHUK LEVEL PLUS TRIPODS

These sturdy tripods are suitable for optical devices with a 1/4" thread. The flip lock system allows you to adjust the height of the tripod quickly and easily while retaining the stability of the construction. The bubble level allows for setting a camera parallel to the ground.

Using the tripod

- To raise or lower the center column, loosen the center column locking knob/ring (3) and then set the column to the desired position. While holding the column in position, tighten the center column locking knob/ring (3) to lock the column.

- Screw the camera to the quick release plate. To mount or remove the quick release plate, squeeze and pull the plate-locking lever out and mount the camera with the quick release plate attached to the quick release place groove.

- To change the direction of the pan bar handle, loosen the pan bar handle locking knob, and then remove the pan bar handle (2) and mount it to the opposite side. Tighten the knob to lock the pan bar handle,

- To rotate the platform horizontally, loosen the pan locking knob (4). To lock the tripod head, tighten the knob. Using the pan bar handle (2), rotate an optical device mounted on the tripod head for panning shots.

- To tilt the platform vertically, loosen the pan bar handle (2) / the tilt locking knob (5). Move the tripod head to the desired position and then tighten the pan bar handle / the tilt locking knob.

- To flip the platform 90^ , loosen the 90^ positioning knob (1). Then, tighten the knob by turning it clockwise (VT10).

Care and maintenance

Do not exceed the tripod's maximum load capacity as that may cause damage to the tripod and the equipment. Before use, ensure the tripod head is securely locked. It is not recommended to use the tripod in salt water. Do not leave the tripod for a long time in the sun or next to the car window. Remove the optical device from the tripod head during transport. Use standard lubricant, if necessary. Do not place the tripod next to the power supply. Store the tripod in a nylon bag in a dry place if it is not in use for a long time. Protect the tripod surface from sand and dirt; otherwise, the locks and threads may become clogged that can cause tripod parts damage. Do not overlighten the thread to avoid stripping a thread. Set the tripod only on a solid surface.

Warranty: 6 months. For further details, please visit: www.levenhuk.com/warranty

The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

BG ТРИНОЖНИЦИ LEVENHUK LEVEL PLUS