HT PtJK-2P4A - Home Automation Vemer - Free user manual and instructions
Find the device manual for free HT PtJK-2P4A Vemer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Home Automation Thermostat/Controller |
| Brand | Vemer |
| Model | HT PtJK-2P4A |
| Power Supply | 24 V AC/DC or 230 V AC (depending on version) |
| Display | LED display |
| Number of Outputs | 2 relay outputs |
| Maximum Current per Output | 4 A (resistive load) |
| Sensor Input | NTC or Pt1000 temperature sensor |
| Control Type | Programmable temperature control with manual override |
| Mounting | Wall or panel mount |
| Dimensions (W x H x D) | 80 x 80 x 30 mm |
| Weight | 150 g |
| Operating Temperature Range | 0 to 50 °C |
| Protection Rating | IP20 |
| Certifications | CE |
| Functions | Day and night schedule, frost protection, hysteresis adjustment |
| Maintenance | Clean with a dry, soft cloth. Do not use liquids. |
| Safety Features | Overload protection, sensor fault detection |
| Spare Parts Availability | Standard fuses and sensors available from authorized distributors |
| Warranty | 2 years from date of purchase |
Frequently Asked Questions - HT PtJK-2P4A Vemer
How do I install the Vemer HT PtJK-2P4A thermostat?
Installation should be performed by a qualified electrician. Mount the device on a wall or panel using the provided screws. Connect the power supply (24 V AC/DC or 230 V AC as per model) and the load to the relay outputs according to the wiring diagram in the user manual. Ensure the sensor is properly connected.
How do I program the thermostat?
Use the buttons on the front panel to navigate the menu. You can set the desired temperature, adjust the hysteresis, and program a daily or weekly schedule. Refer to the manual for detailed programming steps.
What does the LED display indicate?
The LED display shows the current temperature, setpoint temperature, relay status, and any active error codes. It may also indicate the current mode (e.g., manual, automatic).
How do I reset the thermostat to factory settings?
Press and hold the reset button (usually located on the side or behind the front panel) for approximately 5 seconds until the display resets. All user settings will be cleared.
Can this thermostat control both heating and cooling?
Yes, the HT PtJK-2P4A can control both heating and cooling systems. It has a changeover function that can be configured in the settings. Ensure the wiring matches the intended application.
What is the maximum load I can connect to each output?
Each relay output can handle up to 4 A resistive load. For inductive loads (e.g., motors), derate to 2 A. Do not exceed the maximum total current of both outputs combined.
Is the thermostat compatible with 230 V AC power?
Some versions are powered by 230 V AC. Check the label on the device for the rated voltage. If you have a 24 V model, do not connect to 230 V. Always verify before installation.
How should I clean and maintain the thermostat?
Clean the exterior with a dry, soft cloth. Do not use water, solvents, or abrasive cleaners. Ensure the ventilation slots are not blocked. No internal maintenance is required.
What do the error codes mean?
Common error codes: E1 indicates a sensor fault (short or open circuit). E2 indicates overheating. Replace the sensor or check the connection. If error persists, contact support.
What is the warranty period for the Vemer HT PtJK-2P4A?
Vemer provides a 2-year warranty from the date of purchase against manufacturing defects. Retain your purchase receipt. The warranty does not cover damage from improper installation or use.
User questions about HT PtJK-2P4A Vemer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Home Automation in PDF format for free! Find your manual HT PtJK-2P4A - Vemer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HT PtJK-2P4A by Vemer.
USER MANUAL HT PtJK-2P4A Vemer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vemer
Model : HT PtJK-2P4A
Category : Home Automation