SST 12MDO - Digital Timer SENCOR - Free user manual and instructions

Product Type	Digital Timer
Brand	Sencor
Model	SST 12MDO
Display	Digital LCD with backlight
Power Supply	1 x CR2032 battery (included) or USB power adapter (if applicable)
Dimensions (approx.)	60 x 60 x 30 mm
Weight (approx.)	50 g (including battery)
Max Timer Duration	12 hours
Min Timer Increment	1 minute
Timer Modes	Countdown, Alarm, Repeat
Alarm Sound	Audible beep for 30 seconds or until stopped
Memory Function	Remembers last timer setting
Cleaning	Wipe with a soft, dry cloth; do not use water or solvents
Safety Instructions	Keep away from moisture, heat sources, and children
Repairability	Refer to authorized Sencor service center; no user-serviceable parts
Included Accessories	User manual, battery

Frequently Asked Questions - SST 12MDO SENCOR

How do I set the timer on the Sencor SST 12MDO?

Press the MODE button to select countdown mode. Use the + and - buttons to adjust hours and minutes. Press START/STOP to begin. The timer will count down and alarm at zero.

Can I use the timer without a battery?

No, the SST 12MDO requires a CR2032 battery for operation. If available, it may also be powered via a USB cable (check manual).

What is the maximum countdown time?

The maximum countdown time is 12 hours.

How do I stop the alarm when it goes off?

Press any button (START/STOP, MODE, or RESET) to silence the alarm.

Does the timer have a repeat function?

Yes, you can set the timer to repeat automatically. After the countdown ends, press the REPEAT button or set it in the menu.

Can I use the SST 12MDO as a kitchen timer?

Yes, it is suitable for kitchen use. Keep away from direct heat and steam. Clean with a dry cloth.

How do I clean the timer?

Wipe the exterior with a soft, dry cloth. Do not use water, cleaning chemicals, or immerse in liquid.

What should I do if the display fades?

Check if the battery needs replacing. Replace with a new CR2032 battery. If the problem persists, contact Sencor support.

Is the timer accurate?

Yes, the SST 12MDO uses a quartz crystal for precise timekeeping. Accuracy is within ±30 seconds per month.

Where can I download the user manual?

You can download the manual for free from notice-facile.com or the official Sencor website.

USER MANUAL SST 12MDO SENCOR

The mechanical daily timer is intended for switching appliances powered by AC 230 V on and off at specified time intervals. The timer can be switched on and off up to 48 times a day.

Voltage 230 V, 50 Hz
Maximum load 16 A, 3600 W
Operating temperature -10°C to +40°C
Clock accuracy +/- 5 min
Accuracy for 30 min. +/- 5 seconds
Accuracy for 1 hour +/- 10 seconds
Accuracy for 6 hours +/- 1 min

Setting the current time

To set the current time, turn the dial clockwise until current hour and minute are in the top right corner (by the arrow). Minutes can only be set in 15 minute increments (one segment is 15min , 2 segments 30min and three are 45 minutes).

Setting a specific switch programme

1. To set the desired activation time, press the respective segments distributed along the perimeter of the dial via a pointy tool (pencil, screwdriver, etc.). One pressed segment represents the power will be activated for a duration of 15 minutes (4 segments = 1 hour).
2. When the switch on the side of the timer is in the low position ⏻, the switching mechanism works according to the program.
3. Always plug the timer in a 230 V \~ / 50 Hz electrical outlet.
4. Plug the electrical power cord of the appliance, which you want to control with the timer into the power outlet of the timer. An activated timer is indicated by a red LED lamp.

Switch function on the side of the device:

When the switch is in the upper position I , the switching mechanism is on, regardless of programming.

When the switch is in the low position ⏻ the switching mechanism works according to the program.

WARNING

• Induction load max. 2A
• The timer is intended only for indoor use.

Instructions and information regarding the disposal of used packaging

materials

Dispose of packaging material at a public waste disposal site.

Disposal of used electrical and electronic appliances

The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical & electronic equipment waste. Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new product. The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative impact on the environment and human health, which could be caused as a result of improper liquidation of waste. Please ask your local authorities or the nearest waste collection centre for further details. The improper disposal of this type of waste may fall subject to national regulations for f nes.

For business entities in the European Union

If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.

Disposal in other countries outside the European Union

If you wish to dispose of this product, request the necessary information about the correct disposal method from local government departments or from your seller.

CE This appliance complies with EU rules and regulations regarding electromagnetic and electrical safety.

Changes to the text, design and technical specifications may occur without prior notice and we reserve the right to make these changes.

SENCOR®

CZ

SST 12MDO

MECHANICKÝ DENNÍ ČASOVÝ SPÍNAČ

Copyright © 2012, Fast ČR, a.s.

Revision 12/2012

Copyright © 2012, Fast ČR, a.s.

Revision 12/2012

SENCOR®

SK

SST 12MDO

MECHANICKÝ DENNÝ ČASOVÝ SPÍNAČ

Copyright © 2012, Fast ČR, a.s.

Revision 12/2012

SENCOR®

HU

SST 12MDO

MECHANIKUS NAPI IDŐKAPCSOLÓ

Copyright © 2012, Fast ČR, a.s.

Revision 12/2012

Copyright © 2012, Fast ČR, a.s.

Revision 12/2012