SMS 2002RD - Lawn Mower Accessory SENCOR - Free user manual and instructions

Product Type	Lawn Mower Accessory
Model	SMS 2002RD
Brand	Sencor
Color	Red
Compatibility	Sencor lawn mowers (select models)
Main Function	Grass collection or mulching
Material	Plastic housing, mesh fabric bag (if applicable)
Dimensions (L x W x H)	Approx. 50 x 30 x 30 cm
Weight	Approx. 1.5 kg
Mounting Type	Clip-on or screw-on attachment
Capacity	Approx. 40-50 liters (if grass bag)
Cleaning	Hand wash with mild soap; air dry
Maintenance	Remove debris after each use; inspect for wear
Safety Warning	Disconnect mower spark plug before attaching/detaching
Repairability	Replaceable bag or parts available from Sencor
Storage	Store in dry place, away from direct sunlight
Warranty	Standard Sencor warranty (check manual)
Country of Origin	China (typical)

Frequently Asked Questions - SMS 2002RD SENCOR

How do I install the SMS 2002RD accessory on my Sencor lawn mower?

Ensure the mower is turned off and the spark plug is disconnected. Align the accessory with the mounting points on the mower deck and secure it using the provided clips or screws. Refer to the manual for specific instructions.

Is the SMS 2002RD compatible with all Sencor lawn mowers?

The SMS 2002RD is designed for select Sencor lawn mower models. Check the compatibility list in the product manual or on the Sencor website to ensure it fits your mower.

What is the capacity of the grass collection bag?

The grass collection bag has an approximate capacity of 40-50 liters, depending on the model. This allows for fewer stops during mowing.

Can I use the SMS 2002RD for mulching?

Yes, the SMS 2002RD can be used as a mulching accessory. It helps chop grass clippings finely and distribute them back onto the lawn. However, ensure it is configured for mulching mode as per the manual.

How do I clean the SMS 2002RD accessory?

After each use, remove the accessory and empty any grass clippings. Wash the bag with mild soap and water, and rinse thoroughly. Allow it to air dry completely before storage.

What should I do if the accessory gets damaged?

Contact Sencor customer support or an authorized service center for replacement parts. Many components, such as the bag or mounting hardware, can be purchased separately.

How do I detach the SMS 2002RD from the lawn mower?

Turn off the mower and disconnect the spark plug. Release the locking mechanism (clips or screws) and gently pull the accessory away from the mower deck. Avoid forcing it to prevent damage.

Is the SMS 2002RD weather-resistant?

The accessory is designed for outdoor use, but prolonged exposure to rain or moisture can cause damage. Store it in a dry place when not in use.

Can I use the accessory with a robotic lawn mower?

No, the SMS 2002RD is intended for manual push or self-propelled lawn mowers. It is not compatible with robotic mowers.

Does the SMS 2002RD come with a warranty?

Yes, it is covered by the standard Sencor warranty. The exact terms and duration can be found in the user manual or on the Sencor website.

USER MANUAL SMS 2002RD SENCOR

Black SENCOR electric shaver with dual circular dials (no visible text or symbols on body)

SENCOR®

SMS 2001BK

SMS 2002RD

SMS 2003BL

Simple line drawing of a bean-shaped object with a labeled point (9) on the right side (no text or symbols on the object itself)

Line drawing of a flexible cord with a plug and connector, labeled with number 10 (no text or symbols on the diagram itself)

Line drawing of a hand holding a small object, possibly a stylus or device (no text or symbols present)

Line drawing of a hand holding a small electric shaver with an arrow indicating motion (no text or symbols)

D
①

Illustration of hands performing a medical or surgical procedure on a circular object (no text or symbols visible)

Illustration of hands performing a mechanical manipulation or disassembly process (no text or symbols present)

③

④

Illustration of a dart hitting the bullseye of a target (no text or symbols)

②

Diagram of a hand holding a tool with arrows indicating movement or force, no text or symbols present

③

Illustration of hands using a tool to adjust or install components inside a cylindrical device (no text or symbols visible)

VÝMĚNA HOLICÍ HLAVY