STT 212U - Gramophone SENCOR - Free user manual and instructions

Product Type	Turntable / Gramophone
Brand	Sencor
Model	STT 212U
Power Supply	DC 12V, 1A
Bluetooth Version	4.2
Bluetooth Frequency Range	2.402 – 2.480 GHz
FM Radio Frequency Range	87.5 – 108 MHz
Antenna	-0.58 dBi max internal
Turntable Speeds	33 1/3 and 45 RPM
Drive Type	Belt drive (typical)
Tonearm	Straight or S-shape (typical)
Cartridge Type	Magnetic or ceramic (assumed)
Audio Outputs	RCA line out
Dimensions (approx)	420 x 350 x 120 mm
Weight (approx)	3.5 kg
Construction Material	Plastic with metal parts
Accessories Included	Power adapter, RCA cable, 45 RPM adapter, dust cover
Maintenance	Clean stylus with soft brush; keep dust cover closed
Safety Precautions	Do not expose to moisture; unplug when not in use

Frequently Asked Questions - STT 212U SENCOR

How do I connect the turntable to Bluetooth speakers?

Power on the turntable and set it to Bluetooth mode (usually a button or switch). Enable Bluetooth on your speaker and select STT 212U from the list. Once connected, audio will stream wirelessly.

Can I play 78 RPM records on this turntable?

The STT 212U supports only 33 1/3 and 45 RPM speeds. 78 RPM records are not compatible.

What should I do if the turntable does not produce sound?

Check that the turntable is powered on and the stylus is in contact with the record. Ensure the audio cables are connected correctly to your speakers or amplifier. If using Bluetooth, confirm the pairing is active.

How do I clean the stylus?

Use a dedicated stylus brush or a soft, dry brush. Gently sweep from back to front of the stylus. Avoid touching the stylus tip with fingers. For deep cleaning, use a stylus cleaning solution.

How to replace the stylus?

Carefully remove the old stylus by pulling it forward. Insert the new stylus until it clicks into place. Ensure compatibility: use only recommended styli for the cartridge.

Can the turntable record vinyl to digital?

The STT 212U does not have a built-in USB or recording capability. To digitize vinyl, connect the RCA output to a computer audio interface.

Is the turntable compatible with all vinyl records?

Yes, it plays standard 12-inch and 7-inch records at 33 1/3 and 45 RPM. Ensure the record is clean and in good condition to avoid skipping.

How do I adjust the tracking force?

The tracking force is preset at the factory. If adjustment is needed, refer to the manual for the specific counterweight on the tonearm. Use a stylus force gauge for accuracy.

What to do if the turntable skips during playback?

Check that the turntable is on a level, stable surface. Ensure the stylus is clean and not damaged. Increase tracking force slightly if needed, but do not exceed the cartridge's maximum.

How to care for the turntable?

Keep the dust cover closed when not in use. Clean the platter and cabinet with a soft, dry cloth. Avoid placing near heat sources or in direct sunlight. Periodically oil the motor if specified.

USER MANUAL STT 212U SENCOR

Declaration of Conformity

Product/ brand: Turntable/ SENCOR

Type/ model: STT 212U as factory model MT-88BE

DC 12V, 1A

Bluetooth freq.: 2.402-2.480GHz

FM freq.: 87.5-108MHz

Bluetooth version 4.2

Antena descr. -0,58dBi max.

Manufacturer: FAST ČR, a.s.

Černokostelecká 2111, 100 00 Praha 10, Czech Republic

VAT no: CZ26726548

This declaration of conformity is issued under the sole responsibility of the manufacturer.

The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:

Directive RED 2014/53/EU

Directive RoHS 2011/65/EU

The relevant harmonised standards and the other technical specifications:

EN 62368-1:2014+A11:2017

EN 62479:2010

EN 55032:2015

EN 55035:2017

EN 61000-3-2:2014

EN 61000-3-3:2013

ETSI EN 301 489-1 V2.1.1

Place of issuance: Prague

Chairman of the Board

Name: Ing. Zdeněk Pech

Date of issuance: 10.7.2019

Signature: