SHA 9200WH - Air purifier SENCOR - Free user manual and instructions

Product Type	Air Purifier
Brand	Sencor
Model	SHA 9200WH
Color	White
Dimensions (approx.)	360 x 250 x 540 mm (W x D x H)
Weight (approx.)	4.5 kg
Power Supply	220-240V ~ 50/60Hz
Power Consumption	40 W (max)
Coverage Area	Up to 25 m²
Air Filter Type	HEPA H13 + Pre-filter + Activated Carbon
CADR (Dust) (approx.)	150 m³/h
Number of Fan Speeds	3 (Low, Medium, High)
Auto Mode	Yes, with air quality sensor
Sleep Mode	Yes, ultra-quiet operation
Timer	2, 4, 8 hours
Filter Replacement Indicator	Yes, LED indicator
Ionizer	Yes (optional on/off)
Noise Level (approx.)	25 – 50 dB(A)
Air Quality Display	LED ring color indicator (Blue/Green/Red)
Control Type	Touch buttons
Remote Control	No
Safety Features	Automatic shut-off when front cover removed
Filter Cleaning	Pre-filter: vacuum every 2 weeks; HEPA/Carbon: replace as per indicator
Replacement Filter Part	Sencor SHA 9200WH Filter Kit (HEPA + Carbon)
Warranty	2 years

Frequently Asked Questions - SHA 9200WH SENCOR

How do I replace the filter on my Sencor SHA 9200WH air purifier?

Turn off and unplug the purifier. Open the front cover by pulling the top. Remove the old filter. Insert the new HEPA H13 and activated carbon filter (part SHA 9200WH Filter Kit). Close the cover and reset the filter indicator by holding the Fan Speed button for 3 seconds.

How often should I clean the pre-filter?

The pre-filter should be cleaned every 2 weeks using a vacuum cleaner with a brush attachment. More frequent cleaning may be needed if the air is heavily polluted.

What does the color of the LED ring mean?

The LED ring indicates air quality: Blue = Good, Green = Moderate, Red = Poor. The purifier adjusts fan speed automatically in Auto Mode.

Can I use the ionizer while sleeping?

Yes, but the ionizer produces a slight ozone smell. If you are sensitive, turn it off by pressing the Ionizer button. Sleep Mode reduces noise to a minimum.

What is the coverage area of the SHA 9200WH?

The purifier is designed for rooms up to 25 m² (approx. 270 sq ft). For larger rooms, performance may decrease.

How do I reset the filter replacement indicator?

After replacing the filter, press and hold the Fan Speed button for 3 seconds until the filter indicator light turns off.

Why is my air purifier making a loud noise?

Check if the pre-filter is clogged or if there is an obstruction in the fan. Also ensure the purifier is on a flat surface. If noise persists, contact Sencor support.

Can I wash the HEPA filter?

No, the HEPA H13 filter is not washable. Attempting to wash it will damage the filter media. Only the pre-filter can be vacuumed or gently brushed.

Does the SHA 9200WH have a remote control?

No, the SHA 9200WH is controlled via touch buttons on the top panel. It does not include a remote control.

What should I do if the purifier shuts off automatically?

The purifier has a safety feature that shuts it off when the front cover is removed. Ensure the cover is properly closed and latched. If the problem persists, check the power cord and outlet.

USER MANUAL SHA 9200WH SENCOR

White electronic device labeled 'SENCOR' with control buttons and ports (no readable text beyond branding)