FMB001 - Gps Teltonika - Free user manual and instructions

Product Type	GPS/GLONASS Tracker
Dimensions	65 x 56 x 14 mm
Weight	55 g
Power Supply	8-30 V DC
Main Functions	Real-time tracking, geofencing, acceleration detection, driver behavior monitoring
Maintenance	Clean with dry cloth; avoid liquids
Safety Features	Overvoltage protection, short circuit protection, tamper detection
Spare Parts	Available through authorized dealers
General Information	2G GSM communication, GNSS with GPS and GLONASS, USB interface

Frequently Asked Questions - FMB001 Teltonika

How do I install the FMB001 tracker in my vehicle?

Connect the device to the vehicle's power supply (8-30V) and mount it securely using the provided bracket or double-sided tape. Ensure the GPS antenna has a clear view of the sky.

Does the device have a backup battery?

The FMB001 does not have an internal backup battery; it relies on external power. For backup power, consider connecting to an auxiliary battery.

Can I track the device in real time?

Yes, the FMB001 supports real-time tracking via GSM network with configurable update intervals.

Is the device waterproof?

The FMB001 is not fully waterproof but is designed to withstand normal moisture. Avoid exposure to heavy rain or submersion.

What type of SIM card does the device require?

It requires a standard 2G SIM card (size: mini SIM) with data plan enabled.

What do the LED indicators mean?

Green LED blinks when GPS fix is acquired, red LED indicates power, and blue LED shows GPRS activity. Refer to manual for detailed patterns.

How do I configure the device settings?

Use the Teltonika Configurator software via USB or configure remotely over SMS using AT commands.

How much data does the tracker consume?

Data consumption depends on update rate; typical usage is 2-5 MB per month with 10-second updates.

What is the warranty period for FMB001?

Teltonika offers a 2-year warranty for manufacturing defects. Contact your dealer for details.

How do I reset the device to factory settings?

Send SMS command 'setparam 0 0' to the device or use physical reset button inside the device (if available).

USER MANUAL FMB001 Teltonika

Know your device....3

Pinout....4

Set up your device....5

How to insert Micro-SIM card and connect the battery....5

PC Connection (Windows)....6

How to install USB drivers (Windows)....6

Configuration (Windows) 6

Quick SMS configuration....8

LED indications....9

Basic characteristics 9

Safety information.... 11

Certification and Approvals 12

Warranty 13

Warranty Disclaimer....13

TELTONIKA

Know your device

Top view

Bottom view
(without cover)

Figure 1 FMB001 device view

TELTONIKA

Pinout

Table 1 OBDII pinout

PIN NUMBER	PIN NAME	DESCRIPTION
1	DIN1	Ignition input
2	PWM_BUS+/VPW
4	GND (-)	Ground
5	GND (-)	Ground
6	CAN_H	CAN high
7	K-Line
10	PWM_BUS-
14	CAN_L	CAN low
15	L-Line
16	VCC (10 - 30)V DC(+)	Power supply (+10-30 V DC)

Figure 2 FMB001 OBDII socket pinout

TELTONIKA

Set up your device

How to insert Micro-SIM card and connect the battery

1. Gently remove FMB001 cover using plastic pry tool from both sides.
2. Insert Micro-SIM card as shown with PIN request disabled or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
3. Connect battery as shown to device. Position the battery in place where it does not obstruct other components.
4. Attach device cover back.

Device is ready to be connected.

Exploded view diagram of a computer internal structure showing internal components and directional arrows (no text or labels)

Figure 3 Cover removal

2

Isometric technical diagram of a mechanical or electronic component with blue connectors and internal components (no text or symbols)

3

Figure 5 Battery connection
Figure 4 Micro-SIM card insert

Exploded view diagram of a device showing internal components and a blue arrow indicating a specific part (no text or symbols present)

Figure 6 Attaching cover back

TELTONIKA

PC Connection (Windows)

1. Power-up FMB001 with DC voltage (10 - 30 V) power supply using supplied power cable. LED's should start blinking, see "LED indications"
2. Connect device to computer using Micro-USB cable or Bluetooth connection:

• Using Micro-USB cable
- You will need to install USB drivers, see "How to install USB drivers (Windows)"
- Using Blue-tooth
- FMB010 Blue-tooth is enabled by default. Turn on Bluetooth on your PC, then select Add Blue-tooth or other device > Blue-tooth. Choose your device named - "FMBxxx_last_7_imei_digits", without LE in the end. Enter default password 5555, press Connect and then select Done.

1. You are now ready to use the device on your computer.

How to install USB drivers (Windows)

1. Please download COM port drivers from here.
2. Extract and run TeltonikaCOMDriver.exe.
3. Click Next in driver installation window.
4. In the following window click Install button.

Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup.

Configuration (Windows)

At first FMB010 device will have default factory settings set. These settings should be changed according to the user's needs. Main configuration can be performed via Teltonika Configurator software. Get the latest Configurator version from here. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.

Table 2 MS .NET requirements
MS .NET REQUIREMENTS

Operating system	MS .NET Framework version	Version	Links
Windows Vista Windows 7 Windows 8.1 Windows 10	MS .NET Framework 4.6.2	32 and 64 bit	www.microsoft.com

Downloaded Configurator will be in compressed archive. Extract it and launch Configurator.exe. After launch software language can be changed by clicking 📄 in the right bottom corner (Figure 7 Language selection).

Figure 7 Language selection

Configuration process begins by pressing on connected device (Figure 8 Device connected via USB).

Figure 8 Device connected via USB

After connection to Configurator Status window will be displayed (Figure 9 Configurator Status window).

Figure 9 Configurator Status window

Various Status window tabs display information about GNSS, GSM, I/O, Maintenance and etc. FMB001 has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using Save to device button. Main buttons offer following functionality:

1. Load from device – loads configuration from device.
2. Save to device – saves configuration to device.
3. Load from file – loads configuration from file.
4. Save to file - saves configuration to file.
5. Update firmware – updates firmware on device.
6. Read records – reads records from the device.
7. Reboot device – restarts device.
8. Reset configuration – sets device configuration to default.

Most important configurator section is GPRS – where all your server and GPRS settings can be configured and Data Acquisition – where data acquiring parameters can be configured.

More details about FMB001 configuration using Configurator can be found in our Wiki.

TELTONIKA

Quick SMS configuration

Default configuration has optimal parameters present to ensure best performance of track quality and data usage.

Quickly set up your device by sending this SMS command to it:

" setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0"

Note: Before SMS text, two space symbols should be inserted.

GPRS settings:

• 2001 - APN
- 2002 – APN username (if there are no APN username, empty field should be left)
- 2003 – APN password (if there are no APN password, empty field should be left)

Server settings:

• 2004 - Domain
• 2005 - Port
• 2006 – Data sending protocol (0 – TCP, 1 – UDP)

Default configuration settings

Movement and ignition detection:

Vehicle movement will be detected by accelerometer

Ignition will be detected by vehicle power voltage between 13,2 - 30 V

Device makes a record On Moving if one of these events happen:

300 seconds passes

Vehicle turns 10 degrees

Vehicle drives 100 meters

Speed difference between last coordinate and current position is greater than 10 km/h

Device makes a record On Stop if:

1 hour passes while vehicle is stationary and ignition is off

Records sending to server:

If device has made a record it is sent to the server every 120 seconds

After successful SMS configuration, FMB001 device will synchronize time and update records to configured server.

Time intervals and default I/O elements can be changed by using Teltonika Configurator or SMS parameters.

TELTONIKA

LED indications

Table 3 Navigation LED indications

BEHAVIOUR	MEANING
Permanently switched on	GNSS signal is not received
Blinking every second	Normal mode, GNSS is working
Off	GNSS is turned off because:Device is not working or Device is in sleep mode
Blinking fast constantly	Device firmware is being flashed

Table 4 Status LED indications

BEHAVIOUR	MEANING
Blinking every second	Normal mode
Blinking every two seconds	Sleep mode
Blinking fast for a short time	Modem activity
Off	Device is not working or Device is in boot mode

Basic characteristics

Table 5 Basic characteristics

MODULE
Name	Teltonika TM2500
Technology	GSM, GPRS, GNSS, BLUETOOTH
GNSS
GNSS	GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS
Receiver	33 channel
Tracking sensitivity	-165 dBM
Accuracy	< 3 m
Hot start	< 1 s
Warm start	< 25 s
Cold start	< 35 s
CELLULAR
Technology	GSM
2G bands	Quad-band 850 / 900 / 1800 / 1900 MHz
Data transfer	GPRS Multi-Slot Class 12 (up to 240 kbps), GPRS Mobile Station Class B
Data support	SMS (text/data)

TELTONIKA

POWER

Input voltage range	10 - 30 V DC with overvoltage protection
Internal fuse	3 A, 125 V
Power consumption	At 12V < 5 mA (Ultra Deep Sleep)At 12V < 7 mA (Deep Sleep)At 12V < 7 mA (Online Deep Sleep)At 12V < 8 mA (GPS Sleep)At 12V < 28 mA (nominal with no load))At 12V < 0.25 A Max. (with full Load / Peak)

BLUETOOTH

Specification	4.0 + LE
Supported peripherals	Temperature and Humidity sensor,Headset, Inateck Barcode Scanner
OBD INTERFACE
Data	K-Line, CAN Bus data
Data reading	Up to 32 vehicle onboard parameters,9 supported OBD protocols

INTERFACE

Digital Inputs	1
Connection	OBDII socket
GNSS antenna	Internal High Gain
GSM antenna	Internal High Gain
USB	2.0 Micro-USB
LED indication	2 status LED lights
SIM	Micro-SIM
Memory	128MB internal flash memory

PHYSICAL SPECIFICATION

Dimensions	50,7 x 49,6 x 25 mm (L x W x H)
Weight	63 g
OPERATING ENVIRONMENT
Operating temperature (without battery)	-40 °C to +85 °C
Storage temperature (without battery)	-40 °C to +85 °C
Operating humidity	5% to 95% non-condensing
Ingress Protection Rating	IP41
Battery charge temperature	0 °C to +45 °C
Battery discharge temperature	-20 °C to +60 °C
Battery storage temperature	-20 °C to +45 °C for 1 month-20 °C to +35 °C for 6 months

FEATURES

Sensors	Accelerometer
Scenarios	Green Driving, Over Speeding detection, Jamming detection, GNSS Fuel Counter, Excessive Idling detection, Unplug detection, Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip
Sleep modes	GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep
Configuration and firmware update	FOTA Web, FOTA, Teltonika Configurator (USB, Bluetooth), FMBT mobile application (Configuration)
SMS	Configuration, Events, Debug
GPRS commands	Configuration, Debug
Time Synchronization	GPS, NITZ, NTP
Fuel monitoring	OBDII
Ignition detection	Digital Input 1, Accelerometer, External Power Voltage, Engine RPM

TELTONIKA

Safety information

This message contains information on how to operate FMB001 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!

• The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed voltage range is +10...+30 V DC.
• To avoid mechanical damage, it is advised to transport the device in an impact-proof package. Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.
• Before unmounting the device from vehicle, ignition MUST be OFF.
• All related devices must meet the requirements of EN 62368-1 standard.

Do not disassemble the device. If the device is damaged, the power supply cables are not isolated or the isolation is damaged, DO NOT touch the device before unplugging the power supply.

All wireless data transferring devices produce interference that may affect other devices which are placed nearby.

Please consult representatives of your vehicle model regarding OBDII location on your vehicle. In case you are not sure about proper connection, please consult qualified personnel.

The programming must be performed using a PC with autonomic power supply.

Installation and/or handling during a lightning storm is prohibited.

The device is susceptible to water and humidity.

Teltonika is not responsible for any harm caused by wrong cables used for connection between PC and FMB001

WARNING! Do not use FMB001 device if it distracts driver or causes inconvenience due to OBDII placement. Device must not interfere with driver.

Battery should not be disposed of with general household waste. Bring damaged or worn-out batteries to your local recycling center or dispose them to battery recycle bin found in stores.

TELTONIKA

Certification and Approvals

• FMB001 ANATEL
• FMB001 CE / RED
• FMB001 E-Mark
• FMB001 EAC
• FMB001 RoHS
• FMB001 REACH
• FMB001 Declaration of IMEI assignment
• FMB001 Declaration of device operation temperature

This sign on the package means that it is necessary to read the User's Manual before your start using the device. Full User's Manual version can be found in our Wiki.

This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste.

Hereby, Teltonika declare under our sole responsibility that the above described product is in conformity with the relevant Community harmonization: European Directive 2014/53/EU (RED).

00647-20-08591

This equipment is not entitled to protection against harmful interference and must not cause interference in duly authorized systems.

TELTONIKA

Warranty

TELTONIKA guarantees its products to be free of any manufacturing defects for a period of 24 months. With additional agreement we can agree on a different warranty period, for more detailed information please contact our sales manager.

Contact us teltonika-gps.com/about-us/contacts/

All batteries carry a reduced 6 month warranty period.

If a product should fail within this specific warranty time, the product can be:

• Repaired
• Replaced with a new product
• Replaced with an equivalent repaired product fulfilling the same functionality
• TELTONIKA can also repair products that are out of warranty at an agreed cost.

Warranty Disclaimer

TELTONIKA PRODUCTS ARE INTENDED TO BE USED BY PERSONS WITH TRAINING AND EXPERIENCE. ANY OTHER USE RENDERS THE LIMITED WARRANTIES EXPRESSED HEREIN AND ALL IMPLIED WARRANTIES NULL AND VOID AND SAME ARE HEREBY EXCLUDED. ALSO EXCLUDED FROM THIS LIMITED WARRANTY ARE ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO, LOSS OF USE OR REVENUE, LOSS OF TIME, INCONVENIENCE OR ANY OTHER ECONOMIC LOSS.

More information can be found at teltonika-gps.com/warranty-repair/