SEGLARÖ - Beach Umbrella IKEA - Free user manual and instructions
Find the device manual for free SEGLARÖ IKEA in PDF.
| Product Type | Beach Umbrella |
| Brand | IKEA |
| Model | SEGLARÖ |
| Canopy Material | Polyester (common) |
| Frame Material | Aluminum / Steel |
| Base Type | Star base (requires separate slabs) |
| Stabilization Requirements | 4 concrete slabs, each 50×50 cm, total weight min 90 kg (slabs not included) |
| Tilt Adjustment | Yes (adjustable angle) |
| Assembly Required | Yes |
| Manual Included | Yes (20 pages) |
| Recommended Use | Outdoor, beach or garden |
| Wind Safety | Never use in windy conditions; close when not in use |
| Care Instructions | Close and dry before storage; clean with damp cloth |
| Spare Parts Availability | Available through IKEA customer service |
| Repairability | Modular design; parts can be replaced |
Frequently Asked Questions - SEGLARÖ IKEA
User questions about SEGLARÖ IKEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Beach Umbrella in PDF format for free! Find your manual SEGLARÖ - IKEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SEGLARÖ by IKEA.
USER MANUAL SEGLARÖ IKEA
English
The parasol must be secured in place on the ground with 4 slabs of concrete, cement or similar material. Recommended size of the slabs is 50 x 50 cm (about 20 x 20 inches) with a total weight of min. 90 kg (199 lb). Slabs are not included but are available at a DIY store.
Make sure the ground is level and firm. Distribute the slabs around the star base as shown in the illustration in the assembly instruction. Always close/put down the parasol when not in use and never use it when it is windy.
German









1
2
3


4
5

6
7
8
9
i



11
12
i
i
i
i