D-Code - Toilets Duravit - Free user manual and instructions

Product Type	Toilet
Brand	Duravit
Model	D-Code
Material	Ceramic with sealed, non-porous surface
Dimensions (W x D x H)	360 mm x 400 mm x 360 mm (approximate, without seat)
Weight	25 kg (approx.)
Installation Type	Wall-mounted (common for D-Code)
Flush System	Dual flush (typical, not specified)
Recommended Cleaning Agent	Neutral cleaner (pH 5-8) or non-aromatic petroleum hydrocarbon for stubborn soil
Prohibited Cleaning Agents	Abrasive, chlorine, acid, acetone, thinners, high-pressure cleaners, toilet blocks, cistern tablets
Cleaning Frequency	Regularly or immediately after soiling
Cleaning Method	Apply cleaner to soft cloth, not directly; rinse with warm water; dry surface
Care Instructions	Leave seat up if using strong cleaner; avoid rising vapors
Surface Finish	Sealed, non-porous for optimal hygiene
Color	White (standard)
Spare Parts Availability	Available from Duravit
Repair Service	Contact Duravit or authorized dealer
Manual Format	PDF download (EN)
Environment	Manufactured from environmentally friendly materials

Frequently Asked Questions - D-Code Duravit

What cleaning agents are safe for my Duravit D-Code toilet?

Use a neutral cleaning agent (pH 5-8) or non-aromatic petroleum hydrocarbon (e.g., turpentine) for stubborn stains. Avoid abrasive cleaners, chlorine, acids, and high-pressure equipment.

How often should I clean the toilet?

Clean regularly or immediately after soiling to prevent buildup. Regular cleaning makes soil removal easier.

Can I use bleach or toilet blocks?

No. Do NOT use bleach, chlorine, or toilet blocks/cistern tablets. They can cause yellowing and damage the surface.

Why is my toilet seat turning yellow?

Yellowing may occur due to rising vapors from strong cleaning agents. Always leave the seat up when cleaning with strong chemicals, and avoid using harsh cleaners.

How should I apply cleaner to the toilet?

Spray the cleaner onto a soft cloth, not directly onto the product. This prevents liquid from penetrating small openings and damaging the surface.

What is the installation type for D-Code toilets?

Duravit D-Code toilets are typically wall-mounted. For specific installation details, refer to the manual or a professional plumber.

Are spare parts available for this model?

Yes, spare parts are available through Duravit or authorized dealers. Contact them for replacement parts.

Does this toilet come with a warranty?

Warranty details are not specified in the manual. Check with your retailer or Duravit for warranty information.

Can I use a high-pressure cleaner?

No. High-pressure cleaning equipment is prohibited as it can damage the surface and cause water ingress.

Where can I download the user manual?

The user manual is available for free download in PDF format from site notice-facile.com. Select English (EN) to download.

USER MANUAL D-Code Duravit

This product has been manufactured from environmentally friendly materials. The sealed, non-porous surface provides the best possible conditions for optimal hygiene. Please observe the following cleaning and care instructions so that you can enjoy it for as long as possible:

Which cleaning agent?

Use a neutral cleaning agent (pH 5-8), or, if necessary, a non-aromatic petroleum hydrocarbon (e.g. turpentine) in the case of stubborn soiling.

Note!

Damage and yellow discolouration due to incorrect cleaning agents and equipment!

- Do NOT use abrasive cleaning agents or cleaning agents containing chlorine or acid, such as: scouring detergents, chlorinated hydrocarbon, esters (e.g. nitro or thinners and acids), ketones (e.g. acetone, alcohols, aromatics) glycol ether or the like.

• Do not allow the cleaning agent to take effect.
• Do NOT use any high-pressure cleaning equipment.

Yellow discolouration due to rising vapours!

• Leave the seat up while the toilet/urinal contains powerful cleaning agent.
• Do not use any toilet blocks or cistern tablets.

How often?

If the cleaning is not carried out regularly enough, soiling will become more difficult to remove.

Regularly clean the surface or clean immediately if soiled.

How?

Note! Spray can penetrate into very small openings and gaps and damage the surface.

Spray the spray cleaner onto the cleaning cloth and NOT directly onto the product.

Clean the surface with a soft damp cloth.
Remove heavier soiling with warm water and cleaning agent that you apply to the cloth.
Rinse with clean warm water to remove all traces of the cleaning agent and dirt.
Dry the surface.