250/25 LB - Blower Güde - Free user manual and instructions
Find the device manual for free 250/25 LB Güde in PDF.
| Product type | Cordless leaf blower |
| Brand | Güde |
| Model | 250/25 LB |
| Order number | 95620 |
| Rated voltage | 25,2 V |
| No-load speed | 13 000 min⁻¹ |
| Air speed | 250 km/h |
| Weight (without battery and charger) | 2,3 kg |
| Sound pressure level (L_pA) | 71,3 dB(A) |
| Guaranteed sound power level (L_WA) | 85,0 dB(A) |
| Vibration emission value (a_h) | 1,90 m/s² |
| Battery type | Removable lithium-ion |
| Intended use | Blowing dry leaves, dry grass, small branches, needles |
| Required protective equipment | Safety goggles, hearing protection, non-slip shoes, gloves |
| Minimum safety distance | 5 meters |
| Maintenance | Clean ventilation openings with a damp cloth; do not use solvents |
| Warranty | 24 months (consumer), 12 months (industrial use) |
| Spare parts | Available at www.guede.com |
| Repairs | Only entrust to authorized qualified personnel |
Frequently Asked Questions - 250/25 LB Güde
User questions about 250/25 LB Güde
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Blower in PDF format for free! Find your manual 250/25 LB - Güde and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 250/25 LB by Güde.
USER MANUAL 250/25 LB Güde
natural_image
Green electric fan with black blade and handle, no visible text or symbols250/25 LB
95620
250/36 LB
95720
GÜDE GmbH & Co. KG
Birkichstrasse 6
74549 Wolpertshausen
Deutschland
CE
text_image
Li-Ion technology Güde® powered
ENGLISH Please read the instructions carefully before starting the machine.
text_image
Scanned document with Chinese text listing software versions and a 'OK' button
natural_image
3D renderings of a green electric shaver and two black plastic components (no text or symbols visible)| D | Montage | SLO | Montaža |
| GB | Assembly | HR | Montaža |
| F | Assemblage | BG | Монтаж |
| I | Montaggio | RO | Montaj |
| NL | Montage | BIH | Montaža |
| CZ | Montáž | ||
| SK | Montáž | ||
| H | Szerelés |
1
2
| D | Akku | SLO | Akumulator |
| GB | Battery | HR | Akumulator |
| F | Batterie | BG | Акумулатор |
| I | Accumulatore | RO | Acumulator |
| NL | Accu | BIH | Aku-baterija |
| CZ | Akumulátor | ||
| SK | Akumulátor | ||
| H | Akkumulátor |
2
3-4
| D | Betrieb | SLO | Delovanje |
| GB | Operation | HR | Rad |
| F | Fonctionnement | BG | Pábota |
| I | Esercizio | RO | Funcțional |
| NL | Gebruik | BIH | Rad |
| CZ | Provoz | ||
| SK | Prevádzka | ||
| H | Üzemeltetés |
3
5
D Arbeitsanweisungen SLO Napotki za delo
GB Work instructions HR Radne upute
F Instructions BG Инструкции за експлоатация
text_image
Warning sign with yellow exclamation mark and blue circular traffic sign with right arrow
text_image
1 2 click
text_image
2 3 click| D | Akku | SLO | Akumulator |  |
| GB | Battery | HR | Akumulator | |
| F | Batterie | BG | Акумулатор | |
| I | Accumulatore | RO | Acumulator | |
| NL | Accu | BIH | Aku-baterija | |
| CZ | Akumulátor | |||
| SK | Akumulátor | |||
| H | Akkumulátor |
250/25 LB
| 9560395536 | 2 Ah3 Ah | 250/25 LB(95620) |
natural_image
Green and red electric shaver tool with a white arrow indicating motion (no text or symbols)
text_image
2 click
natural_image
3D model of a green and black hair shaver with orange handle (no text or symbols)
natural_image
Green and orange electric vehicle fuel pump with a hand tool, showing a red component being lifted by an arrow (no text or symbols) | D | Akku | SLO | Akumulator |
| GB | Battery | HR | Akumulator | |
| F | Batterie | BG | Акумулатор | |
| I | Accumulatore | RO | Acumulator | |
| NL | Accu | BIH | Aku-baterija | |
| CZ | Akumulátor | |||
| SK | Akumulátor | |||
| H | Akkumulátor |
 |  | |
| 955269554295543 | 2,6 Ah3,0 Ah4,0 Ah | 250/36 LB(95720) |
250/36 LB
natural_image
Close-up of a green and black electric shaver with red adjustment knob, no visible text or symbols
text_image
2 1. CLICK
text_image
3 2. CLICK
natural_image
3D model of a green and black power shaver with red handle (no text or symbols)
natural_image
Green and red handheld power shaver with a black handle, showing a mechanical component being lifted by an arrow (no text or symbols visible)| D | Betrieb | SLO | Delovanje | |
| GB | Operation | HR | Rad | |
| F | Fonctionnement | BG | Pábota | |
| I | Esercizio | RO | Functionare |  |
| NL | Gebruik | BIH | Rad | |
| CZ | Provoz | |||
| SK | Prevádzka | |||
| H | Üzemeltetés |
START
natural_image
Green electric shaver with black handle and orange clasp (no text or symbols visible)STOP
natural_image
Close-up of a green and black electric shaver with orange buttons (no text or symbols visible)
text_image
4natural_image
Illustration of a person using a hair blower to clean autumn leaves, with a green checkmark indicating selection (no text or symbols)
natural_image
Two stick figures in a street cleaning environment, one using a hair blower to clean leafy leaves, the other with a red X mark (no text or symbols)
natural_image
Silhouette of a person sweeping autumn leaves with a green checkmark (no text or symbols)
natural_image
Silhouette of a person sweeping a leafy area with a red X mark (no text or symbols)
natural_image
Silhouette of a person using a green power shaver to clean autumn leaves (no text or symbols)natural_image
Illustration of a green hair dryer with a red spray gun spraying mist, no text or symbols present5
Technische Daten
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
Read and understand the operating instructions before using the appliance. Familiarise with the
control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties.
The operator is responsible for accidents or risks to third parties.
In case of any doubts about connection and operation refer please to our customer center
The machine may not be used by persons with reduced physical, sensory or mental capabilities or persons with a lack of knowledge or experience unless they are supervised by a person responsible.
Children must be supervised in order not to play with the machine.
Specified Conditions Of Use
The leaf blower has been designed to blow dry leaves and light garden waste such as dry grass, twigs and dry spruce and pine needles.
Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.
Leaf blower to be operated only when the nozzle tted.
Requirements for operating staff
The operating staff must carefully read the Operating Instructions before using the appliance.
This appliance has not been designed to be used by persons (including children) with reduced physical, sensory or mental capabilities or with a lack of knowledge or experience.
Qualification: Apart from the detailed instructions by a professional, no special qualification is necessary for appliance using.
Minimum age: Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education.
Training: Using the appliance only requires corresponding training by a professional or the Operating Instructions. No special training is necessary.
Residual risks
Even when the device is used properly and all safety regulations are complied with, there still may be some residual risks.
Hearing damage
A longer stay in the immediate vicinity of the running unit may cause hearing damage. Wear ear protectors!
Despite the observance of the operating instructions there still may be some hidden residual risks.
Emergency procedure
Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. For the sake of eventual accident, in accordance with DIN 13164, a workplace has to be fitted with a first-aid kit. It is essential to replace any used material in the first-aid kit immediately after it has been used. If you seek help, state the following pieces of information::
- Accident site
- Accident type
- Number of injured persons
- Injury type(s)
Symbols
WARNING/Caution!
Read the operating instructions to reduce the risk of injury.
Wear eye protective goggles!
Wear ear protectors!
Take the replaceable battery from the appliance before any extension, cleaning and servicing works.
Risk of injury by thrown-off items! Keep bystanders out the dangerous area (5 m).
Risk of injury by rotating impeller. Keep your hands in safe distance.
Keep a safe distance of at least 5 m from third persons.
Protect against humidity. Never expose tool to rain.
CE marking
Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres.
Protect against humidity
This side up
Battery
Protect the battery against heat and fire.
Protect the battery against water and moisture.
Protect the battery against temperatures above 40^ C.
Do not throw the batteries in household waste.
Deliver the batteries to a collection centre of old batteries where they will be recycled in an environmentally friendly way.
General Power Tool Safety Warnings
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term „power tool“ in the warnings refers to your mains-operated (cordepower tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (groundepower tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCprotected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e) Treat electric tools carefully. Check whether the moving parts work perfectly and do not drag, whether not broken or damaged to such an extent that functioning of electric tools could be affected. Have any damaged parts repaired before using the machine. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
5) Using and treatment of cordless tools.
a) Charge the batteries only in chargers recommended by the manufacturer. Risk of fire for a charger suitable only for a certain type of batteries or, as appropriate, accumulators, if used for other accumulators.
b) Use only such accumulators in this electric appliance that have been designed for this appliance. Use of other accumulators may lead to injuries and risk of fire.
c) Do not leave an accumulator not being used near office clips, coins, keys, nails, screws or other small metal items that could cause contact bridging. Short circuit between accumulator contacts may result in burns or fire.
d) Liquid may leak from an accumulator if used improperly. Prevent contact with such liquid. Rinse an affected body part with water in case of accidental contact. If liquid gets to your eye, seek medical advice. Liquid leaking from a battery may cause skin irritation or burns.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Safety instructions for Leaf Blower
Check the work area before using the appliance.
Remove any hard objects such as stones, shards of glass, wires, etc. that could be thrown off, knocked back or that could otherwise cause injury or damage during appliance operation.
Never use the appliance when the proper equipment is not fitted. A lance must always be fitted. For your protection, use only the recommended adjustable devices to avoid injuries.
Do not use this leaf blower near fire places or BBQ places and open fire, ash pits, etc. A proper use of the leaf blower contributes to fire spread avoidance.
Do not put any objects on the lance blow openings. Make sure the blown material is not being blown at persons, animals, glass sheets or solid objects such as trees, cars, walls, etc. Strong air flow could throw off stones, dirt or rods or they could be bounced off the ground and injure persons, animals, break glass sheets or cause other damage.
Never use the appliance to disperse chemicals, fertilisers or other substances. By this, you will avoid toxic material spread.
Keep children and other persons including animals in a safe distance when using the appliance.
Minimum safe distance is 5 m.
Wear suitable protective clothing such as sturdy shoes with non-slip sole, robust long trousers, gloves, safety glasses and hearing protection!
Do not wear loose clothing or jewels. Hear, clothing and gloves must be out of reach of moving parts as they could get caught by the rotating parts. Do not use the appliance when barefooted or in open sandals.
We recommend wearing a respirator as dust is produced.
Do not race when working with the appliance. Walk slowly and cautiously.
Provide a safe posture, especially on slopes.
Do not use the leaf blower near open windows.
Do not use the appliance in bad weather, especially when there is a risk of storm.
Never point the leaf blower at persons, animals or yourself.
Provide adequate lighting or good lighting conditions when working with the machine.
Make sure the appliance is off before inserting a battery.
Use only those batteries for the power tool that have been designed to be used for that tool. Use of other batteries may lead to injuries and a risk of fire.
⚠️ Before using, check the tightness and proper seating of all screwed and socket joints and protective equipment and if all moving parts are moving smoothly.
⚠ It is strictly prohibited to demount, adjust and alienate the protective equipment on the machine or put other protective equipment on the machine.
Do not use the appliance if damaged or the safety equipment is defective. Replace any worn and damaged parts.
Do not use the device near flammable liquids or gases. Risk of fire and explosion in case of short circuit.
Vapours may leak out in case of unauthorised use or when using a damaged accumulator. Bring fresh air and seek medical advice if experiencing difficulties. Vapours may irritate the respiratory system.
Risk of fire! Risk of explosion!
Never use damaged, defective or deformed accumulators. Never open or damage the accumulator or let it fall on the ground.
Never charge the battery in an environment with acids and easily flammable materials.
Protect the battery against heat and fire.
Battery to be used at the ambient temperatures between 10^ C and +40^ C only.
Never put the battery on heaters and do not expose it to strong sunlight for a long time.
After being subject to heavy load, let the battery cool down first.
Short circuit - do not bridge the accumulator contacts with metal parts.
The accumulator must be packaged (plastic bag, box) or accumulator contacts must be sealed up for accumulator disposal, transport or storage.
Work instructions
Accumulators are supplied partially charged and must therefore be fully charged before being used for the first time.
- Charge the accumulator when the appliance is running slowly or stops.
- A li-ion battery may be charged at any time without any shortening of its life. Charging process interruption will not damage the accumulator.
- A li-ion battery is protected by the Electronic Cell Protection against deep discharge.
- A significantly shorter operating time of a charged battery means the battery life is over and the battery must be replaced. Original spare batteries to be used only.
Maintenance
Take the replaceable battery from the appliance before any extension, cleaning and servicing works.
Repairs and works specified in these Instructions may only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Keep the device, in particular the air vents, clean at all times. Never spray water on the device body!
Never clean the machine and its components with solvents, flammable or toxic liquids. Us only a damp cloth making.
Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.
If necessary, a list of spare parts can be found at www.guede.com.
Machine to be stored in a dry place.
Disposal
The disposal instructions are based on the icons placed on the appliance or its package.
Any damaged or disposed devices must be delivered to appropriate collection centres.
Dispose of the batteries in an environmentally friendly manner.
Li-ion batteries are subject to the special disposal obligation. Have any defective batteries disposed of by a specialised shop. The battery must be taken out before the appliance is scrapped. Damaged batteries may harm the environment and your health if toxic vapours or liquids leak out of such batteries.
Therefore, never send a defective battery by post, etc. Please contact your local recycling centre.
Dispose of the batteries when discharged. We recommend applying an adhesive tape on the poles to protect them against short circuit. Never open the battery.
Transport packaging disposal
The packaging protects the machine against damage during transport. Packaging materials are usually chosen based on environment aspects and waste treatment principles and are therefore recyclable. Returning the packaging into material circulation saves raw materials and reduces waste production. Parts of packagings (e.g. foils, styropor®) can be dangerous for children.
Risk of suffocation!
Keep parts of the packagings out of reach of children and dispose them as soon as possible.
Guarantee
Warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device.
The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.
Important information for the customer
Please be sure to know that returning the product in or after the warranty period must be made in the original packaging.
Service
Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label. Please enter it here for future reference:
Serial No.:
Art. No:
Year of production:
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
WAARSCHUWING/Opgelet!
Translation of the EC-Declaration of Conformity
We, hereby declare the conception and construction of the below mentioned appliances correspond - at the type of construction being launched - to appropriate basic safety and hygienic requirements of EC Directives.
In case of any change to the appliance not discussed with us the Declaration expires.
2006/95/EC 2004/108/EC
2009/105/EC 1907/2006/EC
2011/65/EC ROHS 2009/142/EC
89/686/EEC (PPE) 1935/2004/EC
2006/42/EC
Annex IV
Notified Body: No: Name: Adress:
Type Ex. Cert.-No.:
□ 97/68/EC_
Emission No.:
2000/14/EC_2005/88/EC
2006/95/EC 2004/108/EC
2009/105/EC 1907/2006/EC
2011/65/EC ROHS 2009/142/EC
☐ 89/686/EEC (PPE) 1935/2004/EC
2006/42/EC
Annex IV
Notified Body: No:
Name:
Adress:
Type Ex. Cert.-No.:
97/68/EC
Emission No.:
2000/14/EC_2005/88/EC
