Puck 10 SL690403BK - Phone charger Speed-Link - Free user manual and instructions

USER MANUAL Puck 10 SL690403BK Speed-Link

USER GUIDE PUCK 10 WIRELESS CHARGERWARNING GET STARTEDEN This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks. In order to prevent damage caused by overheating, make sure the product is not covered by textiles, metal or other objects.

INTENDED USE This product is intended to be used as an induction charger for connecting to a computer or other power source and is for indoor home/oce use only. It contains no user- serviceable parts. Do not disassemble it and stop using it immediately if damaged. Jöllenbeck GmbH accepts no liability whatsoever for any damage to this product or injuries caused due to careless or improper use or for purposes for which it is not intended. DISPOSAL This symbol means that you must not dispose of this product together with household waste. Always store and dispose of old equipment or batteries correctly as they can harm the environment or cause injury because they may contain hazardous substances; failure to do so may result in fines. In the EU, you can dispose of your old equipment or batteries free of charge at an ocial recycling point: you are required to do so by law, it ensures your device or battery is recycled and you do your bit to help protect the environment. For information please contact your local authority, civic amenity site or retailer. Major EU retailers (electronics retailers with a sales area of ≥ 400m²) take back small appliances (all dimensions < 25cm) free of charge; others do so only if you purchase products of a similar value. If possible, remove any batteries. CONFORMITY NOTICE Operation of the device (the devices) may be aected by strong static, electrical or high-frequency fields (radio installations, mobile telephones, microwaves, electrostaticdischarges). If this occurs, try increasing the distance from the devices causing the interference. FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Modifications to this product will void the user’s authority to operate this equipment.DE TECHNICAL SUPPORT www.speedlink.com Please keep this information for later reference.

INDICATION DE CONFORMITÉ

INFORMACE O KONFORMITĚ

Having technical problems with this product? Get in touch with our Support team – the quickest way is via our website: www.speedlink.com