284E5QHAW - Moniteur PHILIPS - Free user manual and instructions

USER MANUAL 284E5QHAW PHILIPS

Monitor Important Information Manual Register your product and get support at www.philips.com/welcomeTable of Contents

1. Important Safety Instruction ........3

1.1 Safety precautions and

1.1 Safety precautions and

maintenance Safety precautions and maintenance(English) Warnings Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor. Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the equalizer to maximum increases the earphones and headphones output voltage and therefore the sound pressure level. For models without AC switches: The power outlet should be installed near the equipment, if it is pluggable, for easy access. Note

• To prevent possible hearing damage, do not listen at high volume levels for long periods.

• We recommend you switch off the monitor when it is not in use for a long time. Operation

• Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.

• Do not block the ventilation holes on the cabinet.

• Operate under the specified power supply. Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will cause malfunction and may cause fire or electric shock.

• The USB Type-C port could only be connected to specify equipment with fire enclosure in compliance with IEC 62368-1 or IEC 60950-1. Maintenance

• To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment.

• In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges.

• Temperature: 0-40°C 32-104°F (If the temperature range is inconsistent with the contents of the manual, the manual shall prevail.)

• Please confirm the distribution system in building installation shall provide the circuit breaker rated 120/240V, 20A (maximum).

• If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature.4 Caution(Applicable models with battery)

• Replacement of a battery with an incorrect type that can defeat a safeguard;

• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;

• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;

• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

• Risk of fire or explosion if the battery is replaced by an incorrect type Caution(Applicable models with coin/ button cell batteries)

• Do not ingest battery, Chemical Burn Hazard.

• This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

• Keep new and used batteries away from children.

• If the battery compartment does not close securely, stop using the product and keep it away from children.

• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Stability Hazard. The product may fall, causing serious personal injury or death. To prevent injury, this product must be securely attached to the floor/wall in accordance with the installation instructions. A product set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• ALWAYS use cabinets or stands or installation methods recommended by the manufacturer of the product set.

• ALWAYS use furniture that can safely support the product.

• ALWAYS ensure the product is not overhanging the edge of the supporting furniture.

• ALWAYS educate children about the dangers of climbing on furniture to reach the product or its controls.

• ALWAYS route cords and cables connected to your product so they cannot be tripped over, pulled or grabbed.

• NEVER place a product in an unstable location.

• NEVER place the product on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the product to a suitable support.

• NEVER place the product on cloth or other materials that may be located between the product and supporting furniture.

• NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the product or furniture on which the product is placed.5

• If the existing product is going to be retained and relocated, the same considerations as above should be applied. Note This monitor accepts a 75mm x 75mm/100mm x 100mm/200mm x 200mm VESA-Compliant mounting interface. VESA Mounting Screw (M4 or M6). Always contact manufacturer for wall-mount installation.(For models with wall mount) )Arabic

English When using the display, fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling.Cord or chainM4 or M6 Screw Cord

• Display design may differ from those illustrated.
• Installing must be done by a qualified technician , and please contact your supplier for more information.
• For the Models with net weight >=7kg. Please select the suitable way to Prevent Tipping.
• For the models with VESA Mount, please use method , install the screws with ring to the VESA Mount hole, then tie the cord or chain to the wall. Otherwise, please use method to tie the cord or chain to the stand and then fix it to the wall. Russian ПрииспользованиидисплеяприкрепитеЖК-экранкстенеспомощьюшнураилицепи,способнойвыдержатьвесмонитора,чтобыпредотвратитьегопадение.Cord or chainM4 or M6 Screw Cord

Chinese (Traditional)

A third-party certification according to ISO 14024 Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded. This product is a better choice. It meets all the criteria in TCO Certified, the world’s most comprehensive sustainability certification for IT products. Thank you for making a responsible product choice, that help drive progress towards a more sustainable future! Criteria in TCO Certified have a life-cycle perspective and balance environmental and social responsibility. Conformity is verified by independent and approved verifiers that specialize in IT products, social responsibility or other sustainability issues. Verification is done both before and after the certificate is issued, covering the entire validity period. The process also includes ensuring that corrective actions are implemented in all cases of factory non-conformities. And last but not least, to make sure that the certification and independent verification is accurate, both TCO Certified and the verifiers are reviewed regularly. Want to know more? Read information about TCO Certified, full criteria documents, news and updates at tcocertified.com. On the website you’ll also find our Product Finder, which presents a complete, searchable listing of certified products. Toward sustainable IT products User define mode is used for TCO Certified compliance. (Only applicable to the model of application)64 User define mode is used for TCO Certified compliance. (Only applicable to the model of application)65

Information EPEAT (Only applicable to the model of application) (www.epeat.net) The EPEAT (Electronic Product Environmental Assessment Tool) program evaluates computer desktops, laptops, and monitors based on environmental criteria developed through an extensive stakeholder consensus process supported by US EPA. EPEAT system helps purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes. EPEAT also provides a clear and consistent set of performance criteria for the design of products, and provides an opportunity for manufacturers to secure market recognition for efforts to reduce the environmental impact of its products. Benefits of EPEAT (Only applicable to EPEAT registered model) Reduce use of primary materials. Reduce use of toxic materials. Avoid the disposal of hazardous waste. EPEAT’S requirement that all registered products meet ENERGY STAR’s energy efficiency specifications, means that these products will consume less energy throughout their life. Note: For EPEAT related information please refer to <MMD EPEAT Declaration> via URL: https://mmdmonitors.com/ corporate-social-responsibility/ since PHILIPS monitor EPEAT registration manufacturer is MMD-Monitors & Displays Nederland B.V. Energy Star Declaration (Only applicable to EPA certified model) (www.energystar.gov) ENERGY STAR is a program run by the U.S. Environmental Protection Agency (EPA) and U.S. Department of Energy (DOE) that promotes energy efficiency. This product qualifies for ENERGY STAR in the “default” settings and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. For more information on the ENERGY STAR program, refer to energystar.gov. Note

• To prevent possible hearing damage, do not listen at high volume levels for long periods.

• Um mögliche Hörschäden zu verhindern, ist ein dauerhaftes Hören bei großer Lautstärke zu vermeiden.

• We recommend you switch off the monitor when it is not in use for a long time.66 (CE Only applicable to the model of application) CE Declaration of Conformity (English) This device complies with the require- ments set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromag- netic Compatibility Directive (2014/30/ EU), Low-voltage Directive (2014/35/ EU), ErP Directive (2009/125/EC), RoHS directive (2011/65/EU) and Radio Equip- ment Directive (2014/53/EU)( for Radio Equipment ) This product has been tested and found to comply with the harmonized stand- ards for Information Technology Equip- ment, these harmonized standards published under Directives of Official Journal of the European Union. (Arabic) CE ةقباطم نعإ

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture.

THIS CLASS B DIGITAL APPARATUS

注 2: 「適用除外」項目は、特定の化学物質が JIS C 0950: 2021 の規格によ り適用除外とされた項目に対応することを意味します。 JIS C 0950: 202177 Restriction on Hazardous Substances statement (India) This product complies with the “E-Waste (Management) Rules, 2016” CHAPTER V, rule 16, sub-rule (1). Whereas New Electrical and Electronic Equipment and their components or consumables or parts or spares do not contain Lead, Mercury, Cadmium, Hexavalent Chromium, polybrominated biphenyls and polybrominated diphenyl ethers beyond a maximum concentration value of 0.1% by weight in homogenous materials for lead, mercury, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers and of 0.01% by weight in homogenous materials for cadmium. except of exemptions set in Schedule 2 of the Rule. E-Waste Declaration for India This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about E -waste please visit http://www. india.philips.com/about/sustainability/ recycling/index.page and to know where you can drop off your waste equipment for recycling in India please contact on below given contact details. Helpline number: 1800-425-6396 (Monday to Saturday, 9 a.m. to 5:30 pm) Centralized E-waste collection center Address: TPV Technology India Private Limited, 59, Maheswari Nagar, 1st Main Road, Mahadevapura Post, Whitefield Road, Bangalore, Karnataka,PIN: 560048, Tel: 080-3023-1000 E-mail: india.callcentre@tpv-tech.com78 Information for U.K. only

WARNING - THIS APPLIANCE MUST BE

EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows:

1. Remove fuse cover and fuse.

2. Fit new fuse which should be a BS

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A. NOTE: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13A socket elsewhere. (A) (B) How to connect a plug The wires in the mains lead are coloured in accordance with the following code: BLUE -“NEUTRAL”(“N”) BROWN -“LIVE”(“L”) GREEN&YELLOW -“EARTH”(“E”)

1. The GREEN&YELLOW wire must

be connected to the terminal in the plug which is marked with the letter "E" or by the Earth symbol or coloured GREEN or GREEN&YELLOW.

2. The BLUE wire must be connected

to the terminal which is marked with the letter "N" or coloured BLACK.

3. The BROWN wire must be

connected to the terminal which is marked with the letter "L" or coloured RED. Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the three wires.

4. Warranty Statement

Warranty Statement(English) PHILIPS Monitor’s warranty period listed as below, for areas not covered in this table, please follow their warranty statement. Region Product Category Warranty Period USA, Canada All Monitors 4 years USA, Canada Refurbished monitor 90 days Mexico All Monitors 3 years Chile All Monitors 3 years Peru All Monitors 3 years Brazil All Monitors 1 year China All Monitors 3 years Asia Pacific All Monitors 3 years MEA All Monitors 3 years Europe Monitors C, E lines 24 months Monitors B, M, S, X, P, V lines 36 months Arabic

MEA GWr:ub ExSC, E rbs;m:UnIT½r 24 Ex ExS B, M, S, X, P, V rbs;m:UnIT½r 36 Ex

Spare Parts Service (English) Extending the lifetime of IT products is the most effective way to reduce their environmental impact

Spare parts are not upgradeable, but repairable and/or replaceable. Spare parts are available for use in the repair of EPEAT registered products (refer to www.epeat.net ) for minimum 5 years after the point of sale or 2 years after the end of production, whichever is later. Spare parts are available for use in the repair of non-EPEAT registered products for minimum 3 years after the point of sales or 1 year after the end of production, whichever is later. Please refer to “Service Contact Information” section or www.philips.com/support for further information. Key Spare Parts List Components or Assemblies Replaceable Repairable How to Replace or Repair Connectivity cables Yes No By hand without tool, but please contact your dealer or your local service center (via www.philips.com/support) for confirming the cables specification when necessary. Power cables Yes No External power supply (1) Yes Yes For replacing, please follow above action. For repairing, please just contact your local service center (via www. philips.com/support) for help when necessary to avoid any risk. Display panel or display assembly Yes Yes Please just contact your local service center (via www. philips.com/support) for help when necessary to avoid any risk. Internal power supply (2) Yes Yes System board (3)

motherboard Sim Sim Note (1): only applicable for the models with external power supply. (2): Internal power supply includes power circuit board assembly.99 (3): System board includes keyboard,USB board etc., only applicable for the models with related function. Service van reserveonderdelen (Dutch) Extending the lifetime of IT products is the most effective way to reduce their environmental impact

motherboard Ja Ja100 Note (1): only applicable for the models with external power supply. (2): Internal power supply includes power circuit board assembly. (3): System board includes keyboard,USB board etc., only applicable for the models with related function. Ersatzteil-Service(German) Extending the lifetime of IT products is the most effective way to reduce their environmental impact

motherboard Ja Ja Note (1): only applicable for the models with external power supply. (2): Internal power supply includes power circuit board assembly. (3): System board includes keyboard,USB board etc., only applicable for the models with related function. Servizio ricambi(Italian) Extending the lifetime of IT products is the most effective way to reduce their environmental impact

motherboard Sì Sì Note (1): only applicable for the models with external power supply. (2): Internal power supply includes power circuit board assembly. (3): System board includes keyboard,USB board etc., only applicable for the models with related function. Servicio de piezas de repuesto (Spanish) Extending the lifetime of IT products is the most effective way to reduce their environmental impact

motherboard Sí Sí Note (1): only applicable for the models with external power supply. (2): Internal power supply includes power circuit board assembly. (3): System board includes keyboard,USB board etc., only applicable for the models with related function.104

(+971) 4 821 3832 / (+971) 4 88490742021 © TOP Victory Investments Ltd. All rights reserved. Specications are subject to change without notice. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.