LC-24CHF4012EW - Téléviseur SHARP - Free user manual and instructions

USER MANUAL LC-24CHF4012EW SHARP

Important safety instructions

Please, read these safety instructions and respect the following warnings before the appliance is operated:

In order to prevent fire always keep candles and other open flames away from this product.

• TV’s with the weight of more than 20 kg must be lifted and carried by at least two people. • This TV does not contain any parts which could be repaired by the user. In case of a fault, contact the manufacturer or the authorised service agent. Contact with certain parts inside the TV might endanger your life. The guarantee does not extend to faults caused by repairs carried out by unauthorized third parties. • Do not remove the rear part of the appliance. • This appliance is designed for the receiving and reproduction of video and sound signals. Any other use is strictly forbidden. • Do not expose the TV to dripping or splashing liquid. • To disconnect the TV from mains please unplug the mains plug from the mains socket. • If the supply cord is damaged, it must be replaced by the manufacturer, a service agent or similarly qualified persons in order to avoid a hazard. • The ideal distance to watch TV is approximately five times longer than the diagonal of the screen. Reflections on the screen from other light sources can make the quality of the picture worse. • Ensure the TV has sufficient ventilation and is not close to other appliances and other pieces of furniture. • Install the product at least 5 cm from the wall for ventilation. • Ensure that the ventilation openings are clear of items such as newspapers, table-cloths, curtains, etc. • The TV set is designed to be used in a moderate climate. • The TV set is designed exclusively for operation in a dry place. When using the TV outside, please, make sure it is protected against moisture (rain, splashing water). Never expose to moisture. • Do not place any objects, containers filled with liquids, such as vases, etc. on the TV. These containers might get pushed over, which would endanger electric safety. Place the TV exclusively on flat and stable surfaces. Do not place any objects such as newspaper or blankets, etc. on or under the TV. • Make sure the appliance does not stand on any power cables as they might get damaged. Mobile phones and other devices such as WLAN adapters, monitoring cameras with wireless signal transmission, etc. might cause electromagnetic interference and they should not be placed near the appliance. • Do not place the appliance near heating elements or in a place with direct sunlight as it has a negative effect on cooling of the appliance. Heat storage is dangerous and it can seriously reduce the lifetime of the appliance. In order to ensure the safety, ask a qualified person to remove the dirt from the appliance. • Try to prevent damage to the mains cable or mains adapter. The appliance can only be connected with the supplied mains cable/ adapter.

• Storms are dangerous for all electric appliances. If the mains or aerial wiring is struck by lightening the appliance might get damaged, even if it is turned off. You should disconnect all the cables and connectors of the appliance before a storm.

• To clean the screen of the appliance use only a damp and soft cloth. Use only clean water, never detergents and in no case use solvents. • Position the TV close to the wall to avoid the possibility of it falling when pushed. • WARNING - Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Use cabinets or stands recommended by the manufacturer of the television set. • Only use furniture that can safely support the television set. • Ensure the television set is not overhanging the edge of the supporting furniture. • Not place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support. • Not place the television set on cloth or other materials that may be located between the television set and supporting furniture. • Educate children about the dangers of climbing on furniture to reach the television set or its controls. • Ensure that children do not climb or hang onto the TV. • If your existing television set is being retained and relocated, the same considerations as above should be applied. • The instructions shown below are a safer way to set up the TV, by fixing it to the wall and will avoid the possibility of it falling forwards and causing injury and damage. • This method is also useful the TV is placed on a glass surface or you do not wish to screw anything into your furniture. • For this type of installation you will need a fastening cord A) Using one/both of the top wall-mounting holes and screws (the screws are already supplied in the wall mounting holes) fasten one end of the fastening chord/s to the TV. B) Secure the other end of the fastening chord/s to your wall. • The software on your TV and the OSD layout can be changed without notice.

• Never connect any external devices to a live appliance. Switch off not only the TV but also the devices which are being connected! Plug the TV plug into the wall socket after connecting any external devices and the aerial! • Always make sure there is free access to the TV mains plug. • The appliance is not designed for a use in a workplace fitted with monitors. • The systematic use of headphones at high volume might lead to irreversible hearing damage. • Ensure environmental disposal of this appliance and any components including batteries. When in doubt, please, contact your local authority for details of recycling. • While installing the appliance, do not forget that furniture surfaces are treated with various varnishes, plastics, etc. or they might be polished. The chemicals contained in these products might have a reaction with the TV stand. This could result in bits of the material sticking to the furniture surface, which are difficult to remove, if not impossible. • The screen of your TV has been produced under top quality conditions and was checked in detail for faulty pixels several times. Due to the technological properties of the manufacturing process, it is not possible to eliminate the existence of a small number of faulty points on the screen (even with maximum care while in production). These faulty pixels are not considered faults in terms of guarantee conditions, if their extent is not greater than the boundaries defined by DIN norm.

• The manufacturer cannot be held responsible, or be liable, for customer service-related issues related to the third party content or services. Any questions, comments or service-related inquiries relating to the third party content or service should be made directly to the applicable content or service provider. • There are a variety of reasons you may be unable to access content or services from the device unrelated to the device itself, including, but not limited to, power failure, the Internet connection, or failure to configure your device correctly. Universal Media Corporation, its directors, officers, employees, agents, contractors and affiliates shall not be liable to you or any third party with respect to such failures or maintenance outages, regardless of cause or whether or not it could have been avoided. • All third party content or services accessible via this device is provided to you on an “as-is” and “as available” basis and Universal Media Corporation and its affiliates make no warranty or representation of any kind to you, either express or implied, including, without limitation, any warranties of merchantability, non-infringement, fitness for a particular purpose or any warranties of suitability, availability, accuracy, completeness, security, title, usefulness, lack of negligence or error-free or uninterrupted operation or use of the content or services provided to you or that the content or services will meet your requirements or expectations. • ‘Universal Media Corporation’ is not an agent of and assumes no responsibility for the acts or omissions of third party content or service providers, nor any aspect of the content or service related to such third party providers. • In no event will ‘Universal Media Corporation’ and/or its affiliates be liable to you or any third party for any direct, indirect, special, incidental, punitive, consequential or other damages, whether the theory of liability is based on contract, tort, negligence, breach of warranty, strict liability or otherwise and whether or not Universal Media Corporation and/or its affiliates have been advised of the possibility of such damages.

Important information regarding use of video games, computers, captions and other fixed image displays.

• The extended use of fixed image program material can cause a permanent “shadow image “ on the LCD screen (this is sometimes incorrectly referred to as “burnout to the screen“). This shadow image is then permanently visible on the screen in the background. It is irreversible damage. You can avoid such a damage by following instructions below: • Reduce the brightness/contrast setting to a minimum viewing level. • Do not display the fixed image for a long period of time. Avoid displaying of: » Teletext time and charts, » TV/DVD menu, e.g. DVD contents, » In the„Pause“ mode (hold): Do not use this mode for a long time, e.g. while watching a DVD or a video. » Turn off the appliance if you are not using it.

• Observe the correct polarity when inserting the batteries. • Do not expose batteries to high temperatures and do not place them on locations where the temperature might increase quickly, e.g. near the fire or on the direct sunshine. • Do not expose batteries to excessive radiant heat, do not throw them into the fire, do not disassemble them and do not try to recharge un-rechargeable Cd batteries. They could leak or explode. » Never use different batteries together or mix new and old ones. » Dispose of batteries in an environmentally friendly way. » Most of the EU countries regulate the disposal of batteries by law.

• Do not dispose of this TV as unsorted municipal waste. Return it to a designated collection point for the recycling of WEEE. By doing so, you will help to conserve resources and protect the environment. Contact your retailer or local authorities for more information.

• Hereby, Universal Media Corporation s.r.o. declares that this LED TV is in compliance with the essential requirements and other relevant provisions of R&TTE Directive 1999/5/EC. http://www.sharp.eu/av/ documents-of-conformity

• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries.

• The “HD TV” Logo is a trademark of DIGITALEUROPE. • The “HD TV 1080p” Logo is a trademark of DIGITALEUROPE. • The DVB logo is the registered trademark of the Digital Video Broadcasting - DVB - project. • Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories. • For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, DTS TruSurround and DTS 2.0+Digital Out are trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved. • YouTube and the YouTube logo are trademarks of Google Inc • The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. • Wi-Fi CERTIFIED Miracast and Miracast are trademarks of Wi-Fi Alliance • DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network Alliance. • MHL and the MHL logo are a trademark, registered trademark or service mark of MHL, LLC in the United States and /or other countries. • The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG,. Inc.

What is included in the box

Supply of this TV includes following parts:

1x TV stand installation packet

1x Mini Component adapter cable

1x Mini Composite adapter cable

Please follow the instructions on last page of this user manual.

Getting started - initial set up

Using the RF cable supplied, connect the TV to the TV Aerial wall socket. Connect the power cable to the Electrical outlet.

Insert the batteries supplied into the Remote control and press the

Standby button to power on the TV.

You will be now welcomed with the First Time Installation screen.

If it does not appear, on the remote control, please press [MENU] then 8-8-8-8 and the menu will appear. If you wish to make changes to any of the default settings, use the scroll ▲/▼/◄/► buttons. To exit this menu at anytime, press [EXIT] button.

Please set desired settings in FIRST TIME INSTALLATION screen.

DVB Antenna - You can choose between Terrestrial (DVB-T), Cable (DVB-C) or Satellite (DVB-S)*. Language - Set the TV Menu language. Country - Set the desired country. Tunning Mode - Choose if you want to tune only Digital (DTV) Analogue (ATV) or both Digital and Analogue (DTV + ATV) Environment - Select the location of TV. For home use, please select Home Mode. For shop demonstration mode, set Store Mode. Sorting by LCN - Set LCN to ON if you want to arrange channels by provider preferences (only applies to DVB-T and DVB-C channels).

Press [OK] button to start the tuning process.

Optional channel presets DVB-C:

Keep all default settings as recommended. If DVB-C channels are not found, contact your network provider for the valid "Network ID". Then perform a new search. Press the [MENU], select "Network ID" and enter the network ID.

Optional channel presets DVB-S2*: Select "Satellite" in the "DVB Antenna" in the menu for the optional channel presets. Here you can choose between the various satellites. Since selection completed, then the channel list of the exact satellite will be available to be imported into your TV system.

Confirm with [OK] button on the remote control, to start scanning.

TIP: If you are missing channels, the reason for this is likely to be signal strength, you should consider connecting signal booster and re-tuning the TV.

* - Available only for TVs with DVB-S tuner

STANDBY – Switch on TV when in standby or vice versa.

MUTE – Mute the sound or vice versa. DTV – Switch to digital TV source. RADIO – Switch to Digital and switch between TV and radio in Digital mode. 5. USB – Switch to USB source. 6. DVD – DVD2 – Switch to DVD mode 7. 0 – 9 – to select a TV channel directly. 8. TV GUIDE – Opens the 7 Day TV Guide (Digital mode). 9. – To return to the previous channel viewed. 10. VOL ▲/▼ – To increase / decrease the sound level. 11. S.MODE – Scrolls through sound mode options. 12. P.MODE – Scrolls through picture mode options. 13. FAV – To display favourites menu. 14. CH ▲/▼ – To increase or decrease the channel being watched. 15. (▲/▼/◄/►/ OK) – Allows you to navigate the on-screen menus and adjust the system settings to your preference. 16. MENU – To display OSD menu. 17. EXIT – To exit all menus. 18. SOURCE – To display the input/source menu. 19. INFO – Press once for now/next channel information. Press twice for programme information about current programme. 20. ASPECT – To switch the screen between the different picture formats. 21. SLEEP – Press repeatedly to cycle through the sleep options. 22. AUDIO – To change the audio language (if available). 23. SUBTITLE – To switch the dialogue at the bottom of the screen (on/ off ). 24. TEXT – Teletext mode - To enter Teletext 25. TEXT HOLD – Teletext mode - Hold current page which is displayed 26. TEXT/ DVD ZOOM2 – DVD mode - Teletext Mode - To zoom in 27. DISPLAY – To switch off the screen when listening to radio 28. Rec1/DVD MENU2 – PVR Record / DVD mode - To display the DVD disc menu 29. Rec List1/DVD SETUP2– Opens the list of recordings / DVD mode - To display the DVD setup menu 30. – To restart the current chapter 31. – To advance forward to the next chapter / – To stop the playback / To EJECT the disc press/hold the button 32. for 4 seconds. 33. – To play in fast rewind mode. 34. – To play in fast forward mode. 35. – To play/pause 36. COLOUR BUTTONS – Additional teletext and OSD functions GOTO2 – DVD mode - To go to a specific chapter A–B2 – DVD mode - Press once to set point, press a second time to return to point ANGLE2 – DVD mode - Select different angle of DVD (if available) REPEAT2 – DVD mode - USB mode -To repeat playback 1 - available only with PVR function 2 - available only for TVs with DVD player

TV buttons & Source menu

Vol+ Volume up and menu right Vol- Volume down and menu left CH+ Programme/Channel up and menu up

To access this menu, press [MENU] button on the remote control. To enter a menu press [OK]. If you wish to make changes to any of the default settings, use the scroll (▲/▼/◄/►) buttons. To confirm any settings press

[OK] button. To exit this menu at anytime, press [EXIT] button.

CH- Programme/Channel down and menu down

MENU Displays Menu/OSD SOURCE Displays the input source menu STANDBY Standby Power On/Off EJECT* To EJECT the disc PLAY/ To play/pause PAUSE* * - Only for models with DVD-Player

Choosing Mode Input/Source

To switch between the different input/connections. a) Using the buttons on the remote control:

1. Press [SOURCE/ AV] - The source menu will appear. 2.

Press [▼] or [▲] to select the input you require.

b) Using the buttons on the Television:

1. Press [SOURCE]. 2.

Scroll up / down using CH+/ CH- buttons to the input/source you require.

Press Vol+ to change input/source to the one selected.

Please see the table for connector types for different models available on the page 12.

68. USB USB-Input 1 HDMI 1, 2 in HDMI-Input 1, 2 Mini AV Video Input & Component / Video audio input Mini YPbPr Mini Component HD Input SCART SCART-Input

RF In RF / TV Aerial Input Sat In* Satellite Input Digital Optical Audio Out Digital optical output HEADPHONES 3.5mm Headphone output * - Only on supported devices

Auto Tuning - Allows you to retune the television for all digital channels, digital radio stations and analogue channels.

Analogue Manual Tuning - Allows you to manually tune your analogue signal. Digital Manual Tuning - Allows you to manually tune your digital signal. Channel Edit - Allows you to delete, skip and add favourite channels. – Red Button - delete selected channel. – Green Button - rename selected channel. – Yellow Button - Move selected channel. Go with cursor to channel, which you wish to move to different position, then press YELLOW button. Now move selected channel with UP/ DOWN arrow to desired position and press YELLOW button again to confirm its new position in channel list. – Blue Button - Skip selected channel. Channels selected to Skip will not be displayed while pressing CH+ or CH- buttons. Schedule List - Lists your programme reminders. Signal Information - Information about DVB signal. CI Information - Pay per view services require a “smartcard” to be inserted into the TV. If you subscribe to a pay per view service the provider will issue you with a ‘CAM’ and a “smartcard”. The CAM can then be inserted into the COMMON INTERFACE PORT (CI Card In). Satellite Setup* - This menu is only available in DVB-S2 mode. You can select the type of satellite, your transponder and your LNB type, etc. * - Only for models with DVB-S tuner

Picture Mode - Choose from the following presets.

– Standard - Default settings – Dynamic - Recommended settings for fast moving pictures – Mild - Set to be lighter in colour and less bright – Personal - Lets you manually alter all the settings – Eco - Consume 15% less energy. Contrast - Switch the balance between black and white. Brightness - Increase or decrease the brightness of the picture. Colour - Increases the colour from black and white. Tint - Lets you increase or decrease the level of tint within the picture (for NTSC signal only) Sharpness - Increase or decrease the sharpness of the picture. Colour Temperature - Choose from the following presets. – Normal - Default settings – Warm - Increases red within the picture – Cold - Increases blue within the picture Aspect Ratio - Picture format varies depending on the channel/broadcast. There are a number of different options to best meet your needs. – Auto - Automatically displays the best picture format. So the picture is in the correct position. May have black lines at the top/bottom and/or sides. – 4:3 - Displays the 4:3 picture in its original size. Side bars are shown to fill the 16:9 screen. – 16:9 - Fills the screen with a regular 16:9 signal. – Zoom 1/2 - The picture is the correct proportion but zoomed in to fill the screen.

– Dot by Dot (HDMI) - Will display the picture in its original resolution without any change. Noise Reduction - Filters and reduces the noise (interference) of the picture

Sound Mode - Choose from the following presets

– Standard - Default settings – Music - Emphasises music over voices – Movie - Provides live and full sound for movies – Personal - Selects your personal sound settings – Sports - Emphasises sound for sports Tip: Treble and bass levels can only be adjusted when the sound mode ‘Personal’ is selected. Treble - To adjust the level of high frequency within the sound. Bass - To adjust the level of low frequency within the sound. Balance - To switch the sound between the left and right speakers. Auto Volume Level (AVL) - When ‘on’ is selected, the volume will stay at a constant level regardless of input/source. DTS TruSurround - Allows you to turn surround sound effect ON or OFF. Digital Output - This is the digital Audio output. Choose from the following options: – Off - Off – Auto - Selects the best settings automatically – PCM - Select this option if you are connecting to a Stereo Hi-fi via digital cable (Pulse-code modulation (PCM) is a digital representation of an analogue signal) Audio Description - Additional sound track for visually impaired. Available only on selected DTV shows. AD Volume - to adjust volume of Audio Description sound track Audio Delay (ms) - Enables the user to adjust sound setting to sync picture and audio for TV speakers. SPDIF Delay (ms) - Enables the user to adjust sound setting to sync picture and audio for external speakers connected via digital audio output. AudioTrack - allows you to choose different audio/ language for Digital TV or media.

Clock - Set the date and time. Date and time is set up automatically in DVB mode.

Off Time - Allows you to set a specific time for your TV to turn off. On Time - Allows you to set a specific time for your TV to turn on, the channel it will then display, the source it will be on and also the volume. This function can then be toggled to repeat every day or a certain day. Time Zone - Change your current time zone. Sleep Timer - Lets you set the sleep timer so the television automatically switches off after a set amount of time. Auto standby - Adjustment for the auto standby in hourly increments: Off -> 3h -> 4h -> 5h. OSD Timer - Lets you adjust the amount of time the On Screen Menu stays on the screen before disappearing.

System Lock - Allows you to lock or unlock the menu. You will be asked to enter a 4 digit password. Use the ◄ button to quit the password input. Use the ► button to clear. Default password is 0000.

Set Password - Change the default password. Channel lock - Lock specific TV channels. Parental Guidance - Lock TV channels based on age restriction. Key Lock - Lock the TV buttons.

– Off - All TV buttons are unlocked

– Full - All TV buttons are locked

Language - Allows you to change the language of the menu.

Audio Languages - Allows you to change audio language on selected DVB channels. Subtitle Language - Allows you to change subtitles language on selected DVB channels. Hearing Impaired - If signal provides support for the hearing impaired, the subtitles can be played by pressing the “Subtitle”. If you set Hearing Impaired ON and switch to a channel with supports for hearing impaired subtitles will be activated automatically. LED Status - Allows the user to switch the LED Power indicator light ON or OFF, when the TV is being operated. (When this option is set to OFF the LED Power indicator light will flash when the remote control is used). Blue Screen - Changes the background when there is no input between transparent and a blue background (Only available on some sources). PVR File System - PVR Recording options – Select disk - Select USB port and disk partition – TimeShift Size - Set size time of shift buffer. – Format Start - You can format connected USB storage device to FAT 32 file system. WARNING: ALL DATA ON THE USB DEVICE WILL BE DELETED – Speed check - Tests write speed of connected USB storage devices. First Time Installation - Starts the first time installation. Reset TV - This resets the menus to factory settings. Software Update (USB) - From time to time we may release new firmware to improve the operation of the television (available to download). This menu lets you install the new software/firmware onto the television. Further details of how to do this will be issued with the firmware. Contact the helpline or refer to the ‘www.sharp.eu/av’ website. WARNING: Do not turn off the TV’s power until the upgrade is complete! HDMI CEC* - Allows you to operate devices connected via HDMI with TV remote control. – Auto standby - Automatically turn on/ off connected devices via HDMI CEC – Device list - Allows you to access devices menu and operate the menu using TV remote control. – HDMI ARC - Sends audio signal from terrestrial/satellite broadcast via HDMI to the AV receiver without using any additional audio cables, this functions is available only on HDMI 1 output. Version Info - shows version of TV software Store Mode** - switch ON/OFF shop demonstration mode * - HDMI CEC must be supported by connected device. ** - available only if store mode was selected during first time installation

TV Guide is available in Digital TV mode. It provides information about forthcoming programmes (where supported by the Digital channel). You can view the start and end time of all programmes and on all channels for the next 7 days and set reminders.

1. Press [TV GUIDE]. The following 7 Day TV Guide will appear. 2.

Navigate through the menu using ▲/▼/◄/►.

You can now: Record selected TV channel and TV show by pressing the RED button.* Set a reminder by pressing GREEN. View a previous day by pressing YELLOW. View the next day by pressing BLUE. [INFO] shows detailed information about the selected post

Press [EXIT] to exit the 7 day TV Guide.

* - only for models with recording function

USB mode / Media player

USB mode offers playback of various different types of content that you have saved on your USB Memory Stick. On switching to USB source the

USB mode menu screen will appear. The content will be divided into Photo, Music, Movie and Text based on file type. 1. You can navigate through the menus using the scroll ▲/▼/◄/►buttons. To confirm the item you wish to play/view press [OK] button. 2.

Select the drive you require. (If your drive only has 1 partition you will only see 1 item).

You can now access the item. Press OK to view.

While viewing you may control the item playback modes by using the remote control buttons or by invoking playback navigation menu and selecting on-screen buttons ▲/▼/◄/► and [OK]

NOTE: USB extension cables are not recommended as they can cause a reduction in picture/audio quality and stoppages during play back of USB content.

Built into this television is a USB record facility. This function is available in

Digital mode when used in conjunction with a compatible USB memory stick or USB Hard drive. The benefits of this are as follows: • Pause live TV and then playback, fast forward and rewind (up to live TV). • One button record, if you decide you want to record the current programme. • Easy programmable recording from the 7 day TV Guide Due to the nature of the product, it is necessary to use a high speed USB memory stick (as the TV reads from and writes to the memory stick at the same time, some memory sticks may not be suitable). Minimum Specification - USB Memory Stick – Read Speed - 20 MB/s (Mega Byte Per Second) – Write Speed - 6 MB/s (Mega Byte Per Second)

Pause Live TV (Time Shift)*

Pausing Live TV is very simple. – Press the play/pause button and the television will pause and the live content will be recorded. To resume watching press play/pause again. – Press fast forward to go forward in a recording (i.e. to skip adverts). – Press fast rewind to go back in a recording (i.e. if you fast forwarded too far). TIP: When you switch the TV to standby or change channel the Time Shift memory is wiped. To restart time shift you must press play/pause button.

At any point in time you may decide to record the current channel that you are watching. To do this you need to press the [REC] button. TIP: This television contains one TV tuner, therefore it can only record the channel you are watching or record one channel while the television is in standby mode. NOTE: USB record function is only available in Digital TV mode. Due to copyright laws and illegal copying/recording it is not possible to record to/from any other input/output source. * - only for devices with built in PVR function

To access this menu, press [D. MENU] button on the remote control. If you wish to make changes to any of the default settings, use the scroll

(▲/▼/◄/►) buttons. To confirm any settings press [OK] button. To exit this menu at any time, press [EXIT] button.

TV Display - Choose from the following options 4:3 PanScan - PS Traditional picture format 4:3 LetterBox - LB Traditional picture which has been adapted for widescreen Wide - Widescreen picture format OSD Language - Select desired language

Speaker Setup - Choose from the following options LT/RT - Set LT/RT Sound Stereo - Set Stereo Sound

Dual Mono Stereo - Outputs 2 channels of sound both left and right Mono L - Outputs left side sound Mono R - Outputs right side sound Mix Mono - Outputs a single channel of sound but mix between right and left Dynamic Range - This is the difference between the quietest and loudest sounds. This setting works only with DVD discs recorded in Dolby digital.

TV Type - Choose from the following options NTSC - Normally used for discs from North America, Japan etc PAL - The standard for discs from UK/Europe, most of Asia, Australia etc Multi - For both NTSC and PAL Default - This option allows you reset all DVD settings to factory settings. * - only for devices with built in DVD Player

Visible screen size (diagonal)

On-mode power consumption

25,0 W Annual energy consumption *

Standby power consumption **

<0,50 W Energy efficiency class

Off mode power consumption

* - Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used.

* *- when the TV is turned off with the remote control and no function is active

Compatible files in USB Mode

Max Resolution: 1920x1080

Max Data rate: 40 Mbps

Max Resolution: 1920x1080

Max Data rate: 20 Mbps

Max Resolution: 720x576 Max

Sample Rate 8K-48KHz Bit rate: 32K 320Kbps Channel: Mono/Stereo

AAC Sample Rate 16K-48KHz Bit rate: 32K

~ 442Kbps Channel: Mono/Stereo

Max Resolution: 15360×8640

BMP Max Resolution: 9600x6400 Pixel

Depth 1/4/8/16/24/32 bpp

Max Resolution: 1024x768

Max Resolution: 9600x6400

Max Resolution: 1280×800

USB Modus / Mediaplayer

Samplerate: 8K-48KHz Bit rate: 32K

- 320Kbps Kanal: Mono/Stereo

AAC Sample Rate 16K-48KHz Bit rate: 32K

~ 442Kbps Kanal: Mono/Stereo

Progressive JPEG ATTENTION RISQUE D’ÉLECTROCUTION NE PAS OUVRIR

1x Mini cordon adaptateur composate

Mini AV - Composite/CVBS Video In. + R/L Audio in. for Composite/CVBS & Component/YPbPr

3.5 mm headphones output

LC-22CFF4011E T/C/T2

LC-22CFF4011ES T/C/T2/S2

LC-22CFF4011EW T/C/T2

LC-22DFF4011E T/C/T2/S2

LC-22DFF4011ES T/C/T2

LC-22DFF4011EW T/C/T2/S2

LC-22CFF4012E T/C/T2

LC-22CFF4012ES T/C/T2/S2

LC-22CFF4012EW T/C/T2

LC-24CHF4011E T/C/T2/S2

LC-24CHF4011ES T/C/T2

LC-24CHF4011EW T/C/T2/S2

LC-24DHF4011E T/C/T2

LC-24DHF4011ES T/C/T2/S2

LC-24DHF4011EW T/C/T2

LC-24CHF4012E T/C/T2/S2

LC-24CHF4012ES T/C/T2

LC-24CHF4012EW T/C/T2/S2

TUNER DVD LC-22CFF4011E | LC-22CFF4011ES | LC-22CFF4011EW | LC-22CFF4012E | LC-22CFF4012ES | LC-22CFF4012EW

LC-24DHF Stand Installation

Ständermontage Installation du support Installazione supporto

UMC Poland sp. z o.o.

Ostaszewo 57B, 87-148 Łysomice, Poland Assembled in Europe