WF337AAS - Washing machine SAMSUNG - Free user manual and instructions

USER MANUAL WF337AAS SAMSUNG

WF337 WF328 Washing Machine user manual imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/register WF337A-02440C-03_EN.indd 1 2009-05-13 ¿ÀÈÄ 5:31:03 features of your new silvercare™ washer

Washing in cold water is energy efficient and better for your clothes.

2. Extra Large Capacity

Even bulky garments and blankets get super clean. The large capacity leaves enough room for a more thorough, cleaner wash.

3. High Efficiency Energy & Water Saving

The SilverCare™ system uses 92% less energy than traditional heat sanitization.

4. Direct Drive Inverter Motor

The power to handle anything! Our direct-drive inverter motor delivers power right to the washer tub from a variable speed, reversible motor. A beltless direct-drive motor generates a higher spin speed of 1,300rpms for more effective, quiet operation. The washer also has fewer moving parts.

5. Woolmark Certified

The machine wash wool cycle on the Samsung SilverCare™ machines has been tested and passed the required Woolmark Company specification for machine washable wool products. Fabrics should be washed according to the instructions on the garment label as specified by Woolmark and Samsung.

When selecting this cycle, the water heats to an extra high temperature to remove 99.9% of certain bacteria typically found on clothing, bedding, or towels. This certification is conducted by NSF International, an independent third-party testing and certification organization. Please check garment care label to avoid NSF Protocol P172 garment damage. Only sanitizing cycles have Sanitization Performance of Residential and been designed to meet the requirements of this Commercial, Family-Sized Clothes Washers protocol for sanitization efficacy.

7. Pedestal with Storage Drawers (Model No : WE357A7W/S/R/L/G/B)

An optional 15” pedestal is available to raise the washer for easier loading and unloading. It also offers a built-in storage drawer that can hold a 100 oz. bottle of detergent

8. Stacking (Model No : SK-3A1/XAA, SK-4A/XAA, SK-5A/XAA)

Samsung washers and dryers can be stacked to maximize usable space. An optional stacking kit is available for purchase from your Samsung retailer. <Pedestal with Storage Drawers> <Stacking> 2_ Features of your new silvercare™ washer WF337A-02440C-03_EN.indd 2 2009-05-13 ¿ÀÈÄ 5:31:04 safety information Congratulations on your new Samsung SilverCare™ Washer. This manual contains important information on the installation, use and care of your appliance. Please take time to read this manual to take full advantage of your Washer’s many benefits and features. WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur. It is your responsibility to use common sense, caution, and care when installing, maintaining, and operating your Washer.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

WARNING CAUTION CAUTION Hazards or unsafe practices that may result in severe personal injury or death. Hazards or unsafe practices that may result in minor personal injury or property damage. To reduce the risk of fire, explosion, electric shock, or personal injury when using your washer, follow these basic safety precautions: Do NOT attempt. Do NOT disassemble. Do NOT touch. Follow directions explicity. Unplug the pwer plug from the wall socket. Make sure the machine is grounded to prevent electric shock. Call the service center for help. Read all instructions before using the appliance. As with any equipment using electricity and moving parts, potential hazards exist. To safely operate this appliance, become familiar with its operation and exercise care when using it. Install and store your washer inside, away from exposure to weather. Install and level your washer on a floor that can support its weight. Your washer must be properly grounded. Never plug it into an ungrounded outlet. See page 7 for more information on grounding your washer. Safety information _3 WF337A-02440C-03_EN.indd 3 2009-05-13 ¿ÀÈÄ 5:31:04 To reduce the risk of fire or explosion: WARNING

Do not wash items that have been washed, soaked, or treated with gasoline, dry cleaning solvents, or other flammable or explosive substances. They give off vapors that could ignite or explode. Rinse by hand any material that has been exposed to cleaning solvent or other flammable liquids or solids before putting in your washer. Be sure that all traces of such liquids, solids, and fumes have been removed. Dangerous substances include acetone, denatured alcohol, gasoline, kerosene, certain liquid household cleaners and spot removers, turpentine, waxes, and wax removers.

Do not put gasoline, dry cleaning solvents, or other flammable or explosive substances into the washer.

Under certain conditions, hydrogen gas may be produced in a hot water system–such as your hot water heater-- that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If your hot water system has not been used for two weeks or more, turn on all hot water faucets in your home, and let the water flow for several minutes before using your washer. This will release any hydrogen gas build–up. Since hydrogen gas is flammable, do not smoke or light an open flame during this time. Unplug the power cord before servicing your washer. Do not reach into the appliance when the tumbler is moving. WARNING Do not let children play on or in your washer. The washer door isn’t easily opened from the inside, and a child could be seriously injured if trapped inside. Do not tamper with the controls. Do not repair, replace, or service any part of your washer yourself unless you fully understand the recommended user–repair instructions and have the skills to carry them out. Work done by an unauthorized person may void your warranty. Store laundry detergents and other laundry supplies in a cool, dry place out of children’s reach. Do not wash or dry items that are soiled with vegetable or cooking oil. These items may contain some oil after laundering. Due to the remaining oil, the fabric may smoke or catch fire by itself. CAUTION Do not use chlorine bleach, ammonia, or acids (such as vinegar or rust remover) in the same wash. Hazardous fumes can form. Do not machine wash fiberglass materials. Small particles can stick to fabrics washed in subsequent loads and cause skin irritation. WARNING Before disposing of your washer, remove the door so that children or small animals cannot get trapped inside. Do not sit on top of your Washer. Inlet hoses are subject to damage and deterioration over time. Check the hoses periodically for bulges, kinks, cuts, wear or leaks, and replace them every five years. Ensure pockets are free from small irregularly shaped hard objects, foreign material, etc. ie. coins, knives, pins, etc. These objects could damage your washer. Do not wash clothing with large buckles, buttons, or other heavy metal. 4_ Safety information WF337A-02440C-03_EN.indd 4 2009-05-13 ¿ÀÈÄ 5:31:04 contents

Unpacking your washer

Overview of your washer

Location considerations

Important note to installer

Overview of the control panel

Cleaning the exterior

Cleaning the interior

Cleaning the dispensers

Helping the environment

Declaration of conformity

Unpack your Washer and inspect it for shipping damage. Make sure you have received all of the items shown below. If your Washer was damaged during shipping, or you do not have all of the items, contact 1-800-SAMSUNG(7267864).

OVERVIEW OF YOUR WASHER

Hot water supply hose Cold water supply hose Detergent drawer Control panel Door Drain Hose Adjustable leg ( use for the Upper Bolt Hole ) Spanner Bolt hole covers Water Supply Hose Hose guide

Individual branch circuit serving only your Washer is recommended.

Your Washer is equipped with a power cord. NEVER USE AN EXTENSION CORD. CAUTION 6_ Installing your washer WF337A-02440C-03_EN.indd 6 2009-05-13 ¿ÀÈÄ 5:31:05 Grounding ELECTRICAL GROUNDING IS REQUIRED ON THIS APPLIANCE. This appliance is equipped with a power cord having a three-prong grounding plug for use in a properly installed and grounded outlet. WARNING Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance – if it does not fit the outlet, have a proper outlet installed by a qualified electrician.

IMPORTANT SAFETY PRECAUTIONS

01 Installing your washer This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. To prevent unnecessary risk of fire, electrical shock or personal injury, all wiring and grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest Revision and local codes and ordinances. It is the personal responsibility of the appliance owner to provide adequate electrical service for this appliance. CAUTION NEVER CONNECT GROUND WIRE TO PLASTIC PLUMBING LINES, GAS LINES, OR HOT WATER PIPES. Water To correctly fill your Washer in the proper amount of time, water pressure of 20 – 120 psi is required. Water pressure less than 20 psi may cause water valve failure, not allowing the water valve to shut off completely. Or, it may extend the fill time beyond what your Washer controls allow, resulting in your Washer turning off. A time limit is built into the controls in the event of an internal hose becoming loose and flooding your home. The water faucets must be within 4 feet/122cm of the back of your Washer for the inlet hoses provided with your Washer. Accessory inlet hoses are available in various lengths up to 10 feet/305cm for faucets that are further away from the back of your Washer. To avoid the possibility of water damage:

Have water faucets easily accessible

Turn off faucets when the washer is not in use.

Periodically check that there is no leakage from the water inlet hose fittings. CHECK ALL CONNECTIONS AT THE WATER VALVE AND FAUCET FOR LEAKS. WARNING Drain facility The recommended height of the standpipe is 18 in/46 cm. The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside diameter of the drain hose. The drain hose is attached at the factory. Installing your washer _7 WF337A-02440C-03_EN.indd 7 2009-05-13 ¿ÀÈÄ 5:31:05 installing your washer Flooring For best performance, your Washer must be installed on a solidly constructed floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced load situations. Carpeting and soft tile surfaces are contributing factors in vibration and/or tendency for your washer to move slightly during the spin cycle. Never install your washer on a platform or weakly supported structure. Location considerations Do not install your washer in areas where water may freeze, since your washer will always maintain some water in its water valve, pump, and hose areas. This can cause damage to belts, the pump, hoses and other components. Alcove or closet installation MINIMUM CLEARANCES FOR CLOSET AND ALCOVE INSTALLATIONS: Sides – 1 in / 25 mm Top – 17 in / 432 mm Rear – 4 in / 102 mm Closet Front – 2 in / 51 mm If the washer and dryer are installed together, the closet front must have at least 72 in² or 465 cm² of an unobstructed air opening. Your washer alone does not require a specific air opening. 8_ Installing your washer WF337A-02440C-03_EN.indd 8 2009-05-13 ¿ÀÈÄ 5:31:05

IMPORTANT NOTE TO INSTALLER

Please read the following instructions carefully before installing your Washer. These instructions should be retained for future reference. We recommend you hire a professional for installation of this washer. 01 Installing your washer STEP 1 Selecting a Location Before you install your washer, make sure the location:

Has a hard, level surface

Is away from direct sunlight

Has adequate ventilation

Is away from heat sources such as oil or gas

Has enough space so that your Washer need not stand on its power cord

Doesn’t have any carpeting that will obstruct ventilation openings. STEP 2 Removing the Shipping Bolts Before using your Washer, you must remove the four shipping bolts from the back of the unit.

1. Loosen all bolts with the supplied spanner.

2. Slide the bolt and spacer up and remove the bolt with

the spacer through the hole in the rear wall of your washer. Repeat for each bolt.

3. Fill the holes with the supplied plastic covers.

4. Keep the shipping bolts and spacers for future use.

STEP 3 Installing your Washer

1. Place the drain hose in the drain facility. Be

sure an airtight connection is NOT made between the drain hose and the standpipe. The standpipe must be at least 18 in or 46 cm high. Caution must always be exercised to avoid collapsing or damaging the drain hose. For best results, the drain hose should not be restricted in any way – by elbows, couplings, or excessive lengths. For situations where the drain hose cannot be conveniently elevated to at least 18 in or 46 cm, the drain hose must be supported. Laundry tub Stand pipe Hose retainer 96” Max 18” Min Tie strap 96” Max 18” Min Installing your washer _9 WF337A-02440C-03_EN.indd 9 2009-05-13 ¿ÀÈÄ 5:31:06 installing your washer

2. Check the inlet hose to ensure a washer is inside each fill

hose. Thread the inlet hoses to the HOT and COLD faucet connections. On the other end of the hose, check for one rubber washer per hose and install each fill hose to the water valve. Make sure the hose with the Hot printed line is attached to the HOT faucet. Tighten by hand until snug, then two-thirds of a turn with pliers. For correct water use, connect both HOT and COLD water valves. If one is not connected, an “nF” (no fill) error can occur. Cold Hot Rubber washer Cold printed Hot printed

3. Turn on the “HOT” and “COLD “water supply and check all

connections at the water valve and the faucet for leaks.

4. Plug the power cord into a 3-Prong, well grounded 120 volt

60 Hz approved electrical outlet protected by a 15-amp fuse or comparable circuit breaker. Your washer is grounded through the third prong of the power cord when plugged into a three-prong grounded receptacle.

5. Slide your washer into position.

6. Level your washer by turning the leveling legs in or out as

necessary by hand or wrench included with your washer. When your washer is level, tighten the nuts using the wrench or (-) driver. Your Washer must be leveled on all four sides. A carpenter’s level should be used on all four corners of your Washer. It’s a good idea after the first dozen washes to recheck your washer’s levelness. Avoid the damage of legs, Do not move the Washer unless the Lockingnuts are fastened to the bottom of the Washer. 10_ Installing your washer WF337A-02440C-03_EN.indd 10 2009-05-13 ¿ÀÈÄ 5:31:08 operating instructions

You can fill the tub with dry, unfolded clothes; but DO NOT OVERLOAD the tub.

Overloading may reduce washing efficiency, cause excess wear, and possibly cause creasing or wrinkling of the load.

Wash delicate items such as bras, hosiery, and other lingerie in the Delicates cycle with similar lightweight items.

When washing big bulky items or a few smaller items that don’t fill the tub completely – a rug, a pillow, stuffed toys, or one or two sweaters, for example – add a few towels to improve tumbling and spin performance. During the spin cycle, the washer may add additional water to redistribute the excessive unbalance inside the drum.

When washing heavily soiled loads, not overloading your Washer is very important to assure good cleaning results.

2. Wait for the Door Lock light to go out (5 seconds)

3. Add the item, close the door, and press the Start/Pause Button.

After a pause of 10 seconds, the cycle will resume. To ensure thorough cleaning, add items within five minutes of starting the wash cycle. Try washing bedding, towels, undergarments, and other articles that usually have close body contact using the SilverCare™ Option, which sanitizes using cold water. GETTING STARTED

1. Load your Washer.

3. Add detergent and additives to the dispenser (see pages 16~17).

4. Select the appropriate cycle and options for the load (see pages 12~15).

5. Press the Start/Pause Button.

6. The Wash Indicator light will illuminate.

7. The estimated cycle time will appear in the display.

The time may fluctuate to better indicate the time remaining in the cycle. The actual time required for a cycle may differ from the estimated time in the display depending on the water pressure, water temperature, detergent, and laundry.

8. Before your washer starts to fill, it will make a series of clicking noises to check the door lock and do a

When the cycle is complete, the Door Lock light will go out and “End” will appear in the display.

DO NOT attempt to open the door until the Door Lock light is off. To add a forgotten item, see “Loading your Washer” section. (page 11)

When your Washer is restarted after a pause, expect a delay of up to 15 seconds before the cycle continues.

Pressing Power cancels the cycle and stops your washer.

The Pre Wash, Wash, Rinse and Spin indicator lights will illuminate during those portions of the cycle. Operating instructions _11 WF337A-02440C-03_EN.indd 11 2009-05-13 ¿ÀÈÄ 5:31:08 washing a load of laundry

Digital graphic display Displays the remaining cycle time, all cycle information, and error messages. Temperature selection button Press the button repeatedly to cycle through the different water temperature options. Extra Hot/Cold - Heavily soiled, colorfast items. Only available with the Sanitize cycle. Hot/Cold - Whites and heavily soiled, colorfast items. Warm/Warm - Colorfast items. When warm rinse is selected, only the final rinse will be warm. The other rinses will be cold to conserve energy. Warm/Cold - Moderately soiled, colorfast items; most wrinkle-free items. Cold/Cold - Brightly colored, very lightly soiled items. Press the button repeatedly to cycle through the different spin speed options. Extra High - Removes more water from loads during spin. To minimize wrinkling of wrinkle-free and no-iron fabrics, DO NOT use the Extra High spin option for these loads, nor overload your Washer. High - Use for underwear, t-shirts, jeans and sturdy cottons. Medium - Use for jeans, wrinkle-free or wash-and-wear items and synthetics. Low - Use for delicate items needing a slow spin speed. No Spin - Drains your Washer without spinning. Use for extremely delicate items that cannot tolerate any spin.

SilverCare™ button The SilverCare™ system uses 92% less energy than traditional heat sanitization.

Soil Level selection button Press the button to select the Soil Level/washing time. Heavy - For heavily soiled loads. Normal - For moderately soiled loads. This setting is best for most loads. Light - For lightly soiled loads.

Signal selection button Press the button to increase or decrease the end of cycle signal volume or turn off the signal. 12_ Washing a load of laundry WF337A-02440C-03_EN.indd 12 2009-05-13 ¿ÀÈÄ 5:31:09 Press these buttons to select different cycle options. Delay Start - Any cycle can be delayed for up to 24 hours in one-hour increments. Displayed hour indicates the time at which the wash will be started. Extra Wash - Add additional time to the wash for better stain removal. Extra Rinse - Add an additional rinse at the end of the cycle to more thoroughly remove laundry additives and perfumes. Select Cycle Option Extra Spin - Add additional time to remove more water from loads. My Cycle - Choose your favorite cycle including temperature, spin, soil level, option, etc. Pre Wash - To use this feature add detergent to the Pre Wash selection of the detergent compartment. When turned on, the washer fills with cold water and detergent, tumbles, then drains and advances to the selected wash cycle. Some cycles cannot be selected with this option.*

You cannot select the PreWash option in the Delicate, Wool and Quick Wash cycles. Select the appropriate cycle for the type of load. 03 Washing a load of laundry

This will determine the tumble pattern and spin speed for the cycle. To minimize wrinkling of laundry, select the Perm Press cycle. Heavy Duty - For sturdy, colorfast fabrics and heavily soiled garments. Normal - For most fabrics including cottons, linens, and normally soiled garments. Whites - For white fabrics with or without bleach. Perm Press - For wash-and-wear, synthetic fabrics, and lightly to normally soiled garments. Delicates - For sheer fabrics, bras, lingerie silk, and other handwash-only fabrics. For best results, use liquid detergent. Wool - For machine-washable wool. Loads should be under 8 pounds.

Cycle Selector The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine, M0509. Quick Wash - For lightly soiled garments needed quickly. Sanitize - For heavily soiled, colorfast garments. This cycle heats the water to 150°F to eliminate bacteria. If Pause is selected during the heating portion of the Sanitize Cycle, your Washer door will remain locked for your safety. Rinse + Spin - Use for loads that need rinsing only or to add rinse-added fabric softener to a load. Spin Only - Provides a spin to remove more water. Towels - For bath towels, washcloths and mats. Bedding - For bulky items such as blankets and sheets.

Start/Pause selection button Press to pause and restart programs.

Power button Press once to turn your washer on, press again to turn your washer off. If the washer is left on for more than 10 minutes without any buttons being touched, the power automatically turns off. Washing a load of laundry _13 WF337A-02440C-03_EN.indd 13 2009-05-13 ¿ÀÈÄ 5:31:10 washing a load of laundry Child lock A function that prevents children from playing with your washer. Once the Child Lock function is activated, the control panel cannot be activated, preventing children from playing with the washer. ACTIVATING/DEACTIVATING If you want to activate/deactivate the Child Lock function, press the Soil Level and Signal buttons at the same time for 3 seconds. How It works:

1. To activate or deactivate the Child Lock function, press and hold both the Soil level and

Signal buttons for 3 seconds. Activation/Deactivating the Child Lock function is only available when the power is on.

2. When the Child Lock function is activated, and any button except for the Power button is

pressed, the buzzer will sound for a short period and the “Child Lock” indicator will turn off for 10 seconds.

3. The Child Lock function stays on even after the power has been turned on and off or the

power cord has been disconnected and reconnected. When buttons, other than the Power button, do not respond, please check if the Child Lock function is on. Garment+ You can add or take out laundry items even after the wash has started, as long as the “Garment+” light is on. Pushing the Start/Pause button unlocks the door, unless the water is too hot or if there is too much water in your Washer. If you are able to unlock the door and wish to continue the wash cycle, close the door and press the Start/Pause button. My cycle Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one–button convenience. By pushing the My Cycle button, you activate the settings used during the My Cycle mode. The “My Cycle” light will indicate activation. You can select all options as follows in “My Cycle” mode.

1. Select cycle using the Cycle Selector dial.

2. After cycle selection, set each option.

See page 25 for available option settings with each cycle.

3. Then, you can start “My Cycle” by pushing the Start/Pause button in “My Cycle” mode.

The cycle and options you select will be displayed the next time you choose “My Cycle”. You can change the “My Cycle” settings by repeating the same process above. The last used setting will be displayed the next time you choose “My Cycle”. 14_ Washing a load of laundry WF337A-02440C-03_EN.indd 14 2009-05-13 ¿ÀÈÄ 5:31:10

FOR SILVERCARE™ WASHING

Extra delicate blouses, shirts, or even lingerie that can’t be washed in hot water can now be sanitized effectively without the adverse effects of hot water. The silver plates can easily be replaced by a Service Technician if needed.

2. Press the Power button.

3. Select a Cycle by turning the Cycle Selection dial.

4. Press the SilverCare™ button.

5. Add detergent in the dispenser tray for main washing, and add fabric softener up to the marked line.

: The washer automatically selects optimal washing conditions by sensing the laundry’s weight. FOR HOME USE ONLY– COMMERCIAL USERS SHOULD NOTIFY THEIR LOCAL WASTE

03 Washing a load of laundry To use : The total number of silver cycles run by the washer is displayed when pushing the Signal button and the SilverCare™ button. LU1 : less than 1000 times LU0 : 1000 times You should replace the SilverCare™ kit when the display reads “LU0” as the electrodes are near the end of their useful life. Contact 1-800-SAMSUNG. You cannot choose the SilverCare™ option with the Wool cycle. Washing a load of laundry _15 WF337A-02440C-03_EN.indd 15 2009-05-13 ¿ÀÈÄ 5:31:10 washing a load of laundry DETERGENT USE Your Washer is designed to use high efficiency (HE) detergents.

For best cleaning results, use a high efficiency detergent such as Tide HE, Wisk HE, Cheer HE or Gain HE*. High efficiency detergents contain suds suppressors that reduce or eliminate suds. When fewer suds are produced, the load tumbles more efficiently and cleaning is maximized. WARNING Regular detergent is Not recommended. Please use only HE detergent. Reducing the amount of detergent may reduce cleaning. It is important to pre–treat stains, sort carefully by color and soil level, and avoid overloading.

• Brand names are trademarks of their respective manufacturers. FEATURES Automatic dispenser Your Washer has separate compartments for dispensing detergent and color-safe bleach, chlorine bleach, and fabric softener. All laundry additives are added to their respective compartments before starting your Washer. Detergent Liquid Pre wash compartment The automatic dispenser MUST ALWAYS be in place before starting your Washer. DO NOT open the automatic dispenser when your washer is running. To use:

1. Never exceed the manufacturer’s recommendations when

2. This compartment holds liquid detergent for the main wash

cycle, which is added to the load at beginning of cycle. When using powdered detergent, remove the detergent liquid from the compartment. Powdered detergent will not dispense with detergent liquid. Detergent compartment

1. Pour the recommended amount of laundry detergent directly into the detergent compartment

before starting your washer. If an excessive amount of detergent is used it may be mixed with the softener.

2. If color-safe bleach is to be used, it should be added with detergent to the detergent

compartment. When adding color-safe bleach with detergent, it is best if both laundry products are in the same form – granular or liquid. To protect the environment, avoid using excessive amount of detergent when washing laundry. 16_ Washing a load of laundry WF337A-02440C-03_EN.indd 16 2009-05-13 ¿ÀÈÄ 5:31:10 Pre wash compartment When using the Pre Wash option, detergent should be added to both the Pre Wash compartment and the detergent compartment. The detergent will automatically be dispensed during Pre Wash. If high efficiency (HE) detergent is used, add 1/3 of the recommended amount to the Pre Wash compartment and 2/3 of the recommended amount to the detergent compartment. Bleach compartment Fabric Softener compartment (Liquid chlorine bleach only)

1. Add chlorine bleach to the bleach compartment.

DO NOT exceed the MAX FILL line. Bleach compartment

2. Avoid splashing or over–filling the compartment.

3. Your Washer automatically dispenses bleach into the tub at

the appropriate time. 03 Washing a load of laundry

before it reaches the wash load.

Never pour undiluted liquid chlorine bleach directly onto the load or into the tub. It is a powerful chemical and can cause fabric damage, such as weakening of the fibers or color loss, if not used properly.

If you prefer to use color–safe, non–chlorine bleach, add it to the appropriate detergent compartment. DO NOT pour color–safe bleach into the Bleach compartment. Fabric softener compartment

1. Pour the recommended amount of liquid fabric softener into the softener compartment.

For smaller loads, use less than one capful.

2. Fabric softener should be diluted with water until it reaches MAX FILL in the compartment.

3. The dispenser automatically releases liquid fabric softener at the proper time during the rinse

Use the softener compartment ONLY for liquid fabric softeners.

DO NOT use the Downy Ball* in Fabric softner Compartment with this Washer. It will not add fabric softener at the appropriate time. Use the detergent Compartment.

Brand names are trademarks of their respective manufacturers. Washing a load of laundry _17 WF337A-02440C-03_EN.indd 17 2009-05-13 ¿ÀÈÄ 5:31:11 maintaining your washer

CLEANING THE EXTERIOR

Turn off the water faucets after finishing the day’s washing. This will shut off the water supply to your Washer and prevent the unlikely possibility of damage from escaping water. Leave the door open to allow the inside of your Washer to dry out. Use a soft cloth to wipe up all detergent, bleach or other spills as they occur. Clean the following as recommended: Control Panel – Clean with a soft, damp cloth. Do not use abrasive powders or cleaning pads. Do not spray cleaners directly on the panel. Cabinet – Clean with soap and water.

CLEANING THE INTERIOR

Clean the interior of your Washer periodically to remove any dirt, soil, odor, mold, mildew, or bacterial residue that may remain in your Washer as a result of washing clothes. Failure to follow these instructions may result in unsatisfactory conditions, including unpleasant odor and/or permanent stains on your Washer or laundry. Hard water deposits may be removed, if needed. Use a cleaner labeled “Washer safe”.

CLEANING THE DISPENSERS

The automatic dispenser may need to be cleaned periodically due to laundry additive buildup.

1. Pull out the detergent liquid from detergent compartment.

2. Remove the siphon cap from the fabric softener and bleach

3. Wash all of the parts under running water.

4. Clean the dispenser recess with a soft brush.

5. Reinsert the siphon cap and push it firmly into place.

6. Push the dispenser back into place.

7. Run a Rinse+Spin cycle without any load in your washer.

Washers can be damaged if water is not removed from hoses and internal components before storage. Prepare your Washer for storage as follows:

Select the Quick Wash cycle and add bleach to the automatic dispenser. Run your Washer through the cycle without a load.

Turn the water faucets off and disconnect the inlet hoses.

Unplug your Washer from the electrical outlet and leave your Washer door open to let air circulate inside the tumbler.

If your Washer has been stored in below–freezing temperatures, allow time for any leftover water in your Washer to thaw out before use. 18_ Maintaining your washer WF337A-02440C-03_EN.indd 18 2009-05-13 ¿ÀÈÄ 5:31:11 troubleshooting

CHECK THESE POINTS IF YOUR WASHER…

SOLUTION will not start..

Make sure the door is firmly closed.

Make sure your Washer is plugged in.

Make sure the water source faucets are turned on.

Make sure to press the Start/Pause Button to start your Washer.

Make sure the Child Lock is not activated; see page C4.

Before your Washer starts to fill, it will make a series of clicking noises to check the door lock and do a quick drain.

Turn both faucets on fully.

Make sure the door is tightly closed.

Straighten the water inlet hoses.

Disconnect hoses and clean screens. Hose filter screens may be plugged. has no water or not enough water..

Open and close the door, then press the Start/Pause Button. has detergent remains in the automatic dispenser after the wash cycle is complete.

Make sure your Washer is running with sufficient water pressure.

Make sure the Detergent Selector dial is in the upper position when using granular detergent. vibrates or is too noisy.

Make sure your Washer is set on a level surface. If the surface is not level, adjust your Washer feet to level the appliance.

Make sure that the shipping bolts are removed.

Make sure your Washer is not touching any other object.

Make sure the laundry load is balanced. stops

Plug the power cord into a live electrical outlet.

Close the door and press the Start/Pause Button to start your Washer. For your safety, your Washer will not tumble or spin unless the door is closed.

Before your Washer starts to fill, it will make a series of clicking noises to check the door lock and do a quick drain.

There may be a pause or soak period in the cycle. Wait briefly and it may start.

Check the screens on the inlet hoses at the faucets for obstructions. Clean the screens periodically. 05 Troubleshooting PROBLEM Troubleshooting _19 WF337A-02440C-03_EN.indd 19 2009-05-13 ¿ÀÈÄ 5:31:12 troubleshooting fills with the wrong temperature water. door locked or will not open. does not drain and/or spin.

Turn both faucets on fully.

Make sure the temperature selection is correct.

Make sure the hoses are connected to the correct faucets. Flush water lines.

Check the water heater. It should be set to deliver a minimum 120° F (49° C) hot water at the tap. Also check the water heater capacity and recovery rate.

Disconnect the hoses and clean the screens. The hose filter screens may be plugged.

As your Washer is filling, the water temperature may change as the automatic temperature control feature checks incoming water temperature. This is normal.

While your Washer is filling, you may notice just hot and/or just cold water going through the dispenser when cold or warm wash temperatures are selected. This is a normal function of the automatic temperature control feature as your Washer determines the temperature of the water.

Press the Start/Pause Button to stop your Washer.

Your Washer door will remain locked during the heating portion of the Sanitize Cycle

It may take a few moments for the door lock mechanism to disengage.

Straighten the drain hoses. Eliminate kinked hoses. If there is a drain restriction, call for service.

Close the door and press the Start/Pause Button. For your safety, your Washer will not tumble or spin unless the door is closed. load is too wet at the end of • the cycle.

leaks water. has excessive suds. Use the High or Extra High spin speed. Use high efficiency detergent to reduce over–sudsing.

Load is too small. Very small loads (one or two items) may become unbalanced and not spin out completely.

Make sure the door is firmly closed.

Make sure all hose connections are tight.

Make sure the end of the drain hose is correctly inserted and secured to the drainage system.

Use high efficiency detergent to prevent over–sudsing.

Use high efficiency detergent to prevent over-sudsing.

Reduce the detergent amount for soft water, small or lightly soiled loads.

Non-HE detergent is NOT recommended. 20_ Troubleshooting WF337A-02440C-03_EN.indd 20 2009-05-13 ¿ÀÈÄ 5:31:12 INFORMATION CODES Information codes may be displayed to help you better understand what is occurring with your Washer. CODE SYMBOL SOLUTION Unbalanced load prevented your Washer from spinning. Redistribute the load, press the Start/Pause Button. Door is unlocked when Washer is running. Press the Power button to turn off your Washer, then restart the cycle. If the code reappears, call for service. Door is open when Washer is running. Close the door tightly and restart the cycle. Your Washer failed to lock the door. Close the door tightly and restart the cycle. Water temperature control problem. Call for service. If the code reappears, call for service. 05 Troubleshooting MEANING If the code reappears, call for service. (Heater Control problem) Your Washer has tried to fill but has not reached the proper water level. Call for service. The door will not unlock. Make sure the door is firmly closed. Push the Power button to turn off your Washer, then turn it on again. If the code reappears, call for service. Motor not running properly. Restart the cycle pressing the Start/Pause Button. If the code reappears, call for service. Your washer is not draining. Before calling for service, check the following.

1) Turn off the unit and turn it on again.

It can also mean that the unit senses a small clog while draining. 2) Select only the Spin Cycle.

3) Press the Start/Pause to drain the water.

If it still does not drain, call for service. Your Washer has tried to fill but was unsuccessful. Make sure the water faucets are open all the way. Check for kinked hoses. Check the inlet screens on the fill hoses. The hot/cold water hose connection is not correct. Please connect the hot/cold water hose connection correctly. Problem with control. Call for service. Electric service was lost when Washer was running. Restart the cycle by pressing the Start/Pause Button. A fault is detected in the water level sensor. Call for service Jammed Key. Call for service Troubleshooting _21 WF337A-02440C-03_EN.indd 21 2009-05-13 ¿ÀÈÄ 5:31:14 troubleshooting Motor speed sensor problem. Restart the cycle. If the code reappears, call for service. Temperature sensor problem. Restart the cycle. If the code reappears, call for service. High current detected. Restart the cycle. If the code reappears, call for service. High/Low voltage detected. Restart the cycle. If the code reappears, call for service. SilverCare™ control problem Restart the cycle. If the code reappears, call for service. Too many suds are detected during the washing session. To prevent it, cut down on detergents. The unit is put on hold until the suds are reduced. Then, the unit will go back to the operation. When it finishes washing, End and SUdS codes will blink in turn. For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG) 22_ Troubleshooting WF337A-02440C-03_EN.indd 22 2009-05-13 ¿ÀÈÄ 5:31:15 appendix

Wash Cycle Special Instructions Warning Symbols for Laundering Normal Line Dry/ Hang to Dry Do Not Wash Permanent Press / Wrinkle Resistant / Wrinkle Control Drip Dry Do Not Wring Gentle/Delicates Dry Flat Do Not Bleach Hand Wash Heat Setting Do Not Tumble Dry High No Steam (added to iron) Hot Medium Do Not Iron Warm Low Cold Any Heat Dry Clean No Heat/Air Do Not Dry Clean Water Temperature** Bleach Any Bleach (when needed) Iron-Dry or Steam Temperatures Dryclean Line Dry/ Hang to Dry Only Non-Chlorine (color-safe) Bleach (when needed) High Drip Dry Tumble Dry Cycle Medium Dry Flat Low For machine-washable wool. Loads should be under 8 pounds. Normal 06 Appendix The following symbols provide garment care direction. The Clothing care labels include symbols for washing, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow care label directions to maximize garment life and reduce laundering problems. Permanent Press/ Wrinkle Resistant/ Wrinkle Control Gentle/ Delicates ** The dot symbols represent appropriate wash water temperatures for various items. The temperature range for Hot is 105° - 125° F/ 41° - 52°C, for Warm 85° - 105° F/29° - 41° C and for Cold 60° - 85° F/16° - 29° C. (Wash water temperature must be a minimum of 60° F/16°C for detergent activation and effective cleaning.) The clothes Washer may not ensure these temperatures because the actual water temperatures entering your Washer are dependent on water heater settings and regional water supply temperatures. For example, cold water entering the home in the northern states during winter may be 40° F/4° C which is too cold for effective cleaning. The water temperature in this situation will need to be adjusted by selecting a warm setting, adding some hot water to the MAX FILL line or using your Washer’s heating option, if available. Appendix _23 WF337A-02440C-03_EN.indd 23 2009-05-13 ¿ÀÈÄ 5:31:15 appendix

HELPING THE ENVIRONMENT

Your Washer is manufactured from recyclable materials. If you decide to dispose of it, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the door so that animals and small children cannot get trapped inside the appliance.

Do not exceed the detergent quantities recommended in the detergent manufacturers’ instructions.

Use stain removal products and bleaches before the wash cycle only when necessary.

Save water and electricity by only washing full loads (the exact amount depends upon the program used).

Use SilverCare™ instead of Hot Water Sanitization to save energy.

DECLARATION OF CONFORMITY

This appliance complies with UL2157. SPECIFICATION TYPE

EH/C: Extra Hot/Cold H/C: Hot/Cold W/W: Warm/Warm W/C: Warm/Cold EH: Extra High H: High M: Medium L: Low NS: No Spin H: Heavy N: Normal L: Light

Quick Wash Sanitize Extra Wash Time (mins) Delay Start 06 Appendix FUNCTIONS Temp

This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) Year Parts & Labour This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the Canada. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. SAMSUNG will provide in-home service during the warranty period at no charge, subject to availability within the Canada. In-home service is not available in all areas. To receive in-home service, product must be unobstructed and accessible to the service agent. If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product and shall not apply to the following: damage that occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning, or other acts of nature or God; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal and reinstallation; problems caused by pest infestations. This limited warranty does not cover problems resulting from incorrect electric current, voltage or supply, light bulbs, house fuses, house wiring, cost of a service call for instructions, or fixing installation errors. SAMSUNG does not warrant uninterrupted or error-free operation of the product. 26_ Warranty WF337A-02440C-03_EN.indd 26 2009-05-13 ¿ÀÈÄ 5:31:21 EXCEPT AS SET FORTH HEREIN, THERE ARE NO WARRANTIES ON THIS PRODUCT EITHER EXPRESS OR IMPLIED, AND SAMSUNG DISCLAIMS ALL WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. NO WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM, OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE, OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from province to province. To obtain warranty service, please contact SAMSUNG at: SAMSUNG ELECTRONICS CANADA, INC. – CUSTOMER SERVICE 55 STANDISH COURT

Bouton Soil Level (Souillure)