TIG200 / TIG200P / TIG200PFC / TIG200PPFC - Audio Equipment JASIC - Free user manual and instructions
Find the device manual for free TIG200 / TIG200P / TIG200PFC / TIG200PPFC JASIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | JASIC |
| Model | TIG200 / TIG200P / TIG200PFC / TIG200PPFC |
| Product type | TIG welding inverter (DC TIG/MMA) |
| Primary function | DC TIG welding and manual metal arc (MMA) welding |
| Rated input voltage | 220–230 V AC, 50/60 Hz, single phase |
| Output current range | Approx. 10–200 A in TIG mode |
| Duty cycle | 60% at 200 A |
| No-load voltage | Approx. 56 V |
| Technology | IGBT inverter with high-frequency inverter circuit |
| Welding start | HF start and lift TIG start |
| Pulse function | Available on TIG200P / TIG200PPFC versions |
| Power factor correction | Available on TIG200PFC / TIG200PPFC versions |
| Control panel | Digital display, current and gas time adjustments |
| Protection | Thermal overload, over-current and over-voltage protection |
| Cooling | Forced-air fan |
| Dimensions | Approx. 480 × 240 × 370 mm (W × D × H) |
| Weight | Approx. 9 kg |
| Maintenance | Clean air vents regularly; inspect cables and torch for damage |
| Safety requirements | Use welding helmet, gloves and fire-resistant clothing |
| Spare parts and repairability | Torch, earth clamp, fan and control boards are replaceable |
| Included in the box | Welder, TIG torch, earth clamp, accessories and user manual |
| Manual | 59 pages, available as PDF in English |
Frequently Asked Questions - TIG200 / TIG200P / TIG200PFC / TIG200PPFC JASIC
What do the different model names TIG200, TIG200P, TIG200PFC and TIG200PPFC mean?
TIG200 is the standard DC TIG/MMA inverter. The letter P indicates pulse TIG capability. PFC models include power factor correction for stable operation on weak mains. PPFC models combine pulse function and power factor correction.
Can this welder perform stick (MMA) welding?
Yes, the TIG200 series supports MMA welding with a standard MMA cable set. Use the correct polarity and arc-force/stick settings for smooth electrode performance.
What power supply is recommended?
Connect the machine to a single-phase 220–230 V AC supply with an appropriate circuit breaker. PFC versions help prevent tripping when input voltage fluctuates. Always check the protection fuse rating in the manual.
How do I start a TIG arc?
Use HF start or lift start depending on model: HF creates a contactless high-frequency arc, while lift start ignites by touching the tungsten briefly. Set the gas pre-flow and post-flow before starting.
Why does the machine stop during heavy welding?
The duty cycle has been exceeded. At 200 A the machine has a typical 60% duty cycle; after that, thermal protection activates. Wait for the cooling fan to lower the temperature before resuming.
Can I use it with a generator?
Yes, an inverter-based machine works with generators, but the generator must provide stable voltage and frequency and enough power. PFC models are especially suitable for portable or limited mains supply.
What shielding gas should I use?
For DC TIG welding, use 100% argon at a flow rate of 8–12 litres per minute, adjusted according to the welding current and nozzle distance.
Does this welder weld aluminium?
This is a DC TIG unit, so it is not optimized for aluminium. For high-quality aluminium welding AC is required; the TIG200 series is designed for stainless steel, carbon steel and copper alloys.
How should I maintain the machine?
Regularly blow out dust from the internal fan and air vents, check the torch and earth cables for damage, and keep the machine dry. Never weld without the covers for the electronics.
Can I replace worn parts myself?
Consumables such as tungsten electrodes, collets, nozzles and contact tips can be replaced by the user. Internal components like the fan or control board should be serviced by a qualified technician.
User questions about TIG200 / TIG200P / TIG200PFC / TIG200PPFC JASIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio Equipment in PDF format for free! Find your manual TIG200 / TIG200P / TIG200PFC / TIG200PPFC - JASIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TIG200 / TIG200P / TIG200PFC / TIG200PPFC by JASIC.
USER MANUAL TIG200 / TIG200P / TIG200PFC / TIG200PPFC JASIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JASIC
Model : TIG200 / TIG200P / TIG200PFC / TIG200PPFC
Category : Audio Equipment