Larva X (DSM2/DSMX) - Drone HappyModel - Free user manual and instructions
Find the device manual for free Larva X (DSM2/DSMX) HappyModel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | FPV Racing Drone |
| Brand | HappyModel |
| Model | Larva X (DSM2/DSMX) |
| Receiver | DSM2/DSMX compatible |
| Wheelbase | 130 mm |
| Dimensions | 140 mm x 140 mm x 45 mm |
| Weight | 52 g (without battery) |
| Battery | 2S 300 mAh LiPo |
| Flight Time | 3-5 minutes |
| Motors | 1102 8000KV brushless |
| Camera | 700TVL CMOS |
| Video Transmitter | 5.8 GHz 25 mW |
| Remote Control | DSM2/DSMX radio transmitter |
| Flight Controller | F4 with OSD support |
| ESC | 4-in-1 25A |
| Propellers | 3-inch (76 mm) tri-blade |
| Main Functions | Acro mode, altitude hold, 3D flying capability |
| Maintenance and Cleaning | Wipe with a dry cloth; avoid water and dust |
| Safety Features | Propeller guards, low-voltage alarm, failsafe |
| Spare Parts Available | Motors, frames, ESCs, cameras, propellers |
| Repairability | Modular design for easy part replacement |
| General Information | Suitable for indoor and outdoor flight |
Frequently Asked Questions - Larva X (DSM2/DSMX) HappyModel
What is the Larva X (DSM2/DSMX) drone model?
The Larva X is a compact FPV racing drone by HappyModel, featuring DSM2/DSMX receiver compatibility for easy binding with Spektrum transmitters.
What battery should I use with this drone?
It requires a 2S 300mAh LiPo battery (not included) with a standard JST-PH 2.0 connector for optimal performance.
How long does the flight time last?
The average flight time is 3 to 5 minutes depending on flying style and battery condition. Using a fresh battery and gentle flying can extend this.
Which radio transmitter is compatible with this drone?
The drone is pre-equipped with a DSM2/DSMX receiver, so you can use any DSM2/DSMX-compatible transmitter, such as Spektrum or OrangeRx modules.
Is the Larva X suitable for beginners?
It is initially designed for intermediate pilots due to its agile performance. However, beginners can use it with care and in a stabilized mode if available.
How do I bind the drone to my transmitter?
Power on the drone and put your transmitter into binding mode. The receiver LED will indicate a successful bind. Refer to your transmitter manual for specific steps.
What spare parts are typically needed?
Commonly replaced parts include propellers, motors, and camera. The modular design makes it easy to swap out individual components without soldering for most parts.
Can I use this drone for FPV flying?
Yes, it comes with a 5.8GHz video transmitter and a 700TVL camera, so you can use FPV goggles or a monitor for a first-person view experience.
How should I clean and maintain the drone?
After each flight, wipe the frame with a soft dry cloth to remove dust. Avoid moisture and direct sunlight. Check screws and props regularly for wear.
What safety features does this drone have?
It includes propeller guards to protect fingers, a low-voltage alarm to warn when the battery is low, and a failsafe that triggers if the signal is lost.
User questions about Larva X (DSM2/DSMX) HappyModel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drone in PDF format for free! Find your manual Larva X (DSM2/DSMX) - HappyModel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Larva X (DSM2/DSMX) by HappyModel.
USER MANUAL Larva X (DSM2/DSMX) HappyModel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HappyModel
Model : Larva X (DSM2/DSMX)
Category : Drone