ISC-EAA8000-R - Detector Dahua Technology - Free user manual and instructions
Find the device manual for free ISC-EAA8000-R Dahua Technology in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive Infrared (PIR) Motion Detector |
| Brand | Dahua Technology |
| Model | ISC-EAA8000-R |
| Detection Method | Dual-element low-noise pyroelectric sensor |
| Detection Range | 12 meters (at 90° angle) |
| Detection Angle | 90° |
| Coverage Area | Approximately 110 m² |
| Power Supply | 9-16 VDC (12 VDC nominal) |
| Current Consumption | Max 15 mA (including LED) |
| Alarm Output | Form C relay, NC/NO selectable, 100 mA at 30 VDC |
| Anti-Masking | Active IR anti-mask with tamper detection |
| Pet Immunity | Up to 25 kg (adjustable sensitivity) |
| LED Indicators | Red LED for walk test, green LED for alarm |
| Tamper Protection | Front cover and back tamper switch |
| Mounting Height | 2.2 m (recommended) |
| Operating Temperature | -10°C to +55°C |
| Storage Temperature | -20°C to +60°C |
| Dimensions | 128 mm × 66 mm × 55 mm |
| Weight | 120 g |
| Enclosure Material | ABS plastic |
| Protection Rating | IP55 (indoor/outdoor use) |
| Compatible Panels | Dahua alarm panels and other standard alarm systems |
| Installation Type | Wall mount or optional swivel bracket |
| Maintenance | Regular cleaning of the lens with a soft dry cloth |
| Security Features | Digital temperature compensation and false alarm filtering |
Frequently Asked Questions - ISC-EAA8000-R Dahua Technology
What is the detection range of the ISC-EAA8000-R?
The detector has a detection range of up to 12 meters with a 90° angle, covering about 110 m². This makes it ideal for large rooms or corridors. Adjusting the sensitivity can fine-tune the range to avoid false alarms.
Can the detector be used outdoors?
Yes, the ISC-EAA8000-R has an IP55 protection rating, meaning it is protected against dust and low-pressure water jets. However, it is recommended to install it under a roof or eave to prolong its lifespan. Direct exposure to heavy rain or snow should be avoided.
How do I connect the detector to my Dahua alarm panel?
Connect the alarm output relay to the corresponding zone on your panel. The terminal block supports NC (normally closed) and NO (normally open) configurations. Refer to the wiring diagram in the user manual for exact connections. Use a 12 VDC power supply.
What does anti-masking do?
The anti-masking feature detects any attempt to block or cover the detector's lens with a spray, tape, or object. It triggers an alarm condition if the lens is obscured, ensuring that intruders cannot disable the detector. The tamper switch also reacts to the cover being opened.
How do I adjust the pet immunity to prevent false alarms?
The pet immunity can be set using the on-board jumper or via the configuration software. Set the threshold to 25 kg to ignore pets weighing up to that value. Place the detector at a height of 2.2 m and aim it downward slightly to further reduce false triggers from small animals.
What maintenance does the detector require?
Periodically clean the lens with a soft dry cloth to remove dust and cobwebs. Check the mounting brackets and screws to ensure they are tight. Also, test the tamper switch and alarm output at least once a year to confirm proper operation.
Can I use the detector with non-Dahua alarm systems?
Yes, the relay output is dry contact and can be connected to any standard alarm control panel. The detector operates on 12 VDC. Ensure your panel provides the correct voltage and that the relay rating (100 mA at 30 VDC) matches your requirements.
What should I do if the detector gives false alarms frequently?
First, check the installation height and direction. Avoid facing windows or heating vents. Reduce the sensitivity by adjusting the potentiometer or configuring the digital filters. Also, make sure the pet immunity is activated if you have animals. Clean the lens, as dirt or spider webs can cause false triggers.
Is there a warranty or repair service for the detector?
Dahua offers a standard limited warranty. For repair or replacement, contact an authorized Dahua service center. Many common parts, such as covers and brackets, are replaceable. In case of malfunction, install a new detector if repairs are not cost-effective.
How do I perform a walk test?
Set the detector to walk test mode by closing the jumper on the board. Walk slowly across the detection area. The red LED will light up whenever you are detected. Adjust the mounting angle and sensitivity until you achieve full coverage. When done, open the jumper to return to normal mode.
User questions about ISC-EAA8000-R Dahua Technology
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Detector in PDF format for free! Find your manual ISC-EAA8000-R - Dahua Technology and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ISC-EAA8000-R by Dahua Technology.
USER MANUAL ISC-EAA8000-R Dahua Technology
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dahua Technology
Model : ISC-EAA8000-R
Category : Detector