10GBASE-LRM-WR - Uncategorized Wire Technologies - Free user manual and instructions
Find the device manual for free 10GBASE-LRM-WR Wire Technologies in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 10GBASE-LRM SFP+ Optical Transceiver |
| Form Factor | SFP+ (Small Form-factor Pluggable Plus) |
| Data Rate | 10.3125 Gbps |
| Wavelength | 1310 nm |
| Fiber Type | Multi-mode (MMF) |
| Connector Type | Duplex LC |
| Reach | Up to 220 m (OM2/OM3 MMF) |
| IEEE Standard | 802.3aq (10GBASE-LRM) |
| Power Consumption | < 2.5 W typical |
| Supply Voltage | 3.3 V |
| Operating Temperature | 0 to 70 °C |
| Storage Temperature | -40 to 85 °C |
| Digital Diagnostics | DON (Digital Optical Monitoring) supported |
| Compliance | SFF-8432, SFF-8431, RoHS |
| Applications | 10G Ethernet, data center, enterprise networking |
| Installation | Hot-pluggable |
| Cleaning | Use fiber optic cleaning tools for connectors |
| Repair | Non-repairable; replace as a unit |
Frequently Asked Questions - 10GBASE-LRM-WR Wire Technologies
What is the 10GBASE-LRM-WR transceiver used for?
It is a 10G Ethernet optical transceiver designed for connections over multi-mode fiber, commonly used in data centers and enterprise networks.
What is the maximum transmission distance of the 10GBASE-LRM-WR?
The module supports distances up to 220 meters over OM2 or OM3 multi-mode fiber (MMF).
Which fiber type is required?
It requires multi-mode fiber (MMF) with an LC duplex connector. OM2 or OM3 fiber is recommended for optimal performance.
Is the 10GBASE-LRM-WR compatible with any switch?
The module is SFP+ MSA compliant and should work with any brand that follows the SFF-8432 standard, such as Cisco, Juniper, or Arista, as long as the port supports 10G LRM.
How do I install the transceiver?
Insert the SFP+ module firmly into the SFP+ port until it clicks, then connect the LC fiber cable. The module is hot-pluggable, so no need to power off the device.
How should I clean the optical connectors?
Use a fiber optic cleaning tool (e.g., a lint-free wipe or a cleaning pen) to gently clean the ferrule and connector ends. Avoid touching the end face with fingers.
What is the typical power consumption?
The power consumption is less than 2.5 watts, making it energy-efficient for high-density deployments.
How can I troubleshoot a link issue?
Check that the fiber polarity is correct, verify the fiber type and distance, ensure the connector is clean, and confirm that both ends support 10GBASE-LRM. Use the digital optical monitoring (DOM) features to check optical levels.
Does the module support digital diagnostics?
Yes, it supports Digital Optical Monitoring (DOM/DON), allowing real-time monitoring of temperature, voltage, TX/RX power, and bias current.
What is the warranty/replacement policy?
Wire Technologies typically offers a 1-year limited warranty against manufacturing defects. If a defect occurs, contact your vendor for a replacement—do not attempt to repair.
User questions about 10GBASE-LRM-WR Wire Technologies
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 10GBASE-LRM-WR - Wire Technologies and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 10GBASE-LRM-WR by Wire Technologies.
USER MANUAL 10GBASE-LRM-WR Wire Technologies
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Wire Technologies
Model : 10GBASE-LRM-WR
Category : Uncategorized