TM550700 - Uncategorized Omaha - Free user manual and instructions
Find the device manual for free TM550700 Omaha in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Food Thermometer |
| Brand | Omaha |
| Model | TM550700 |
| Display | LCD with backlight |
| Temperature Range | -50°C to 300°C (-58°F to 572°F) |
| Accuracy | ±1°C (±2°F) |
| Sensor Type | Thermocouple |
| Probe Material | Stainless Steel |
| Cable Length | 1.2 meters |
| Response Time | 2-3 seconds |
| Battery Type | 1 x CR2032 coin cell |
| Battery Life | Approximately 12 months |
| Auto Shut-off | After 10 minutes of inactivity |
| Waterproof Rating | IP65 (splash-proof) |
| Unit Switchable | Celsius / Fahrenheit |
| Preset Programs | Beef, Pork, Chicken, Fish |
| Alarm Function | High / low temperature alert |
| Dimensions | 70 x 40 x 20 mm |
| Weight | 50 g |
| Material | ABS plastic and stainless steel |
| Maintenance | Wipe with damp cloth; probe hand-washable |
| Safety Approvals | CE, RoHS |
| Package Contents | Thermometer, probe, manual, battery |
Frequently Asked Questions - TM550700 Omaha
How do I switch between Celsius and Fahrenheit?
Press and hold the MODE button for 3 seconds to toggle between °C and °F. The selected unit appears on the display.
How do I clean the thermometer after use?
Wipe the device with a damp cloth. The stainless steel probe can be rinsed and dried. Do not immerse the main unit or cable in water.
Why does the display show "LLL" or "HHH"?
"LLL" means the reading is below the minimum range (-50°C), while "HHH" means it exceeds 300°C. Remove the probe from the extreme temperature environment.
Can I leave the probe in the oven?
The probe is heat-resistant up to 300°C. However, the cable and main unit are not oven-safe. Keep them outside the oven while cooking.
How do I replace the battery?
Slide the battery cover open, remove the old CR2032 battery, and insert a new one with the positive side facing up. Close the cover until it clicks.
The thermometer is not turning on. What should I do?
Verify that the battery is installed correctly and has power. If the display is dim, replace the battery. Also, make sure the probe is firmly connected to the device.
Can I calibrate the thermometer?
It is factory-calibrated. To test accuracy, place the probe in ice water and it should read 0°C/32°F. If not, contact customer support.
What is the auto-off feature?
The device powers down automatically after 10 minutes of inactivity to save battery. You can disable it by holding the HOLD button while turning on.
Is the thermometer dishwasher safe?
No. Only the probe can be cleaned by hand with soapy water. The main unit, cable, and display must be wiped with a damp cloth.
How do I set a custom target temperature?
Press the SET button to enter target temperature mode, adjust using the up/down buttons, and press SET again to save. The alarm triggers when the food reaches the set temperature.
User questions about TM550700 Omaha
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TM550700 - Omaha and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TM550700 by Omaha.
USER MANUAL TM550700 Omaha
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Omaha
Model : TM550700
Category : Uncategorized