MPM-05-15 - Power Supply Mean Well - Free user manual and instructions
Find the device manual for free MPM-05-15 Mean Well in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | AC-DC Power Supply Module |
| Brand | Mean Well |
| Model | MPM-05-15 |
| Input Voltage Range | 85-264 VAC (universal input) |
| Output Voltage | 15 V DC |
| Output Current | 0.33 A |
| Output Power | 5 W |
| Efficiency | Up to 78% (typical) |
| Dimensions (L x W x H) | 1.54 x 1.08 x 0.75 inches (39.0 x 27.5 x 19.0 mm) |
| Weight | Approximately 1.13 oz (32 g) |
| Protection | Short circuit, overload, over voltage, over temperature |
| Safety Standards | Medical safety per IEC/EN 60601-1 |
| Mounting | PCB mounting (solder pins) |
| Cooling | Free-air convection |
| Operating Temperature | -30°C to +70°C (derated from +45°C) |
| Input/Output Isolation | 4 kVAC (medical isolation) rated |
| No-Load Power Consumption | Less than 0.1 W |
| Maintenance | No routine maintenance required; periodic visual inspection and cleaning with dry cloth |
| Repairability | Non-serviceable; replace the module if defective |
| Warranty | Typically 3 years (confirm with seller) |
Frequently Asked Questions - MPM-05-15 Mean Well
What is the output voltage and current of the Mean Well MPM-05-15?
The MPM-05-15 provides a 15 V DC output with a rated current of 0.33 A, delivering up to 5 W of power.
Can the MPM-05-15 be used for medical applications?
Yes, it is designed to meet medical safety standards (IEC/EN 60601-1) with reinforced isolation, making it suitable for medical devices with proper system-level compliance.
What is the input voltage range for this power supply?
The MPM-05-15 accepts a universal input of 85-264 VAC, allowing it to operate worldwide with a frequency range of 47-63 Hz.
Does the MPM-05-15 require heatsinking or forced airflow?
No, it is designed for free-air convection cooling. For loads above 4 W, derating may be required at high ambient temperatures; refer to the datasheet for derating curves.
What protections are built into the MPM-05-15?
It includes short circuit, overload, over voltage, and over temperature protections. These automatically protect the module and connected load under fault conditions.
How should I mount the MPM-05-15 on a PCB?
The module is designed for PCB mounting using through-hole solder pins. Follow the recommended footprint and soldering profile from the datasheet. Ensure proper spacing and clearance for isolation.
What is the no-load power consumption?
The no-load power consumption is less than 0.1 W, making it efficient for applications that require low standby power.
Can I use the MPM-05-15 to power a 15 V LED strip?
Yes, if the total LED current does not exceed 0.33 A. It provides a regulated 15 V output suitable for LED lighting or other 15 V devices within the power rating.
What is the isolation voltage between input and output?
The isolation voltage is rated at 4 kVAC between input and output, meeting medical safety requirements for reinforced insulation.
What should I do if the MPM-05-15 becomes hot during operation?
If the case temperature exceeds 85°C, check ambient temperature and load current. Ensure adequate ventilation and consider derating the output power. Over temperature protection will shut down the module temporarily to prevent damage.
User questions about MPM-05-15 Mean Well
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Power Supply in PDF format for free! Find your manual MPM-05-15 - Mean Well and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MPM-05-15 by Mean Well.
USER MANUAL MPM-05-15 Mean Well
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mean Well
Model : MPM-05-15
Category : Power Supply