LCA2/0-38F-X - Uncategorized Panduit - Free user manual and instructions
Find the device manual for free LCA2/0-38F-X Panduit in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Compression Lug |
| Brand | Panduit |
| Model | LCA2/0-38F-X |
| Series | LCA |
| Conductor Size | 2/0 AWG |
| Stud Size | 3/8 in (0.375 in) |
| Number of Holes | 2 |
| Material | Copper |
| Finish | Electroplated tin |
| Barrel Type | Standard |
| Flared End | Yes |
| Insulation | Non-insulated |
| Connection Type | Crimp |
| Voltage Rating | 600 V |
| Operating Temperature | -40 °C to 90 °C |
| Standards | UL 486A-486B, CSA C22.2 |
| RoHS Compliant | Yes |
| Wire Strip Length | 1.25 in (approx.) |
| Overall Length | 2.75 in (approx.) |
| Width | 0.83 in (approx.) |
| Height | 0.94 in (approx.) |
| Weight | 0.14 lb (approx.) |
| Mounting Type | Bolt-on (not included) |
Frequently Asked Questions - LCA2/0-38F-X Panduit
What is the Panduit LCA2/0-38F-X?
The Panduit LCA2/0-38F-X is a compression lug designed to terminate 2/0 AWG copper conductors onto a 3/8-inch stud. It features a two-hole configuration for secure mounting and a tin-plated finish for corrosion resistance.
What wire size does the LCA2/0-38F-X accommodate?
It accommodates 2/0 AWG copper conductors only. Do not use with aluminum conductors, as the lug is not rated for that application.
What stud size does the hole fit?
The mounting holes are designed for 3/8-inch studs (or bolts). It has two holes spaced according to standard terminal pad dimensions.
How do I install this compression lug?
Strip the conductor to the recommended wire strip length, insert it into the barrel, and use a crimping tool with the correct die (e.g., Panduit CT-2940) for a standardized indent crimp. Then bolt the lug to the equipment pad.
What is the required torque for the mounting bolt?
For the mounting bolt, the torque depends on the hardware. Generally, for 3/8-inch bolts, a typical torque range is 25-30 ft-lb for copper connections. Always consult your application standards for accurate values.
Is the LCA2/0-38F-X suitable for outdoor use?
Yes, the electroplated tin finish provides good corrosion resistance when exposed to humidity and atmospheric contaminants. However, it should be protected if used in highly corrosive environments.
What is the voltage rating of this lug?
This compression lug is rated for applications up to 600 V, as is typical for this class of industrial connectors.
What is the working temperature range?
The lug can operate within a temperature range of -40°C to 90°C under standard conditions, thanks to the copper and tin-plate construction.
Does this terminal lug come with mounting screws?
No, the hardware is not included. The lug is supplied as a single piece; you must provide the appropriate bolts, nuts, and lock washers separately.
What is the meaning of the "F" and "X" in the part number?
The F indicates a flared barrel end, which simplifies conductor insertion, while the X indicates the tin-plated finish. This is part of Panduit's product identification system.
User questions about LCA2/0-38F-X Panduit
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual LCA2/0-38F-X - Panduit and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LCA2/0-38F-X by Panduit.
USER MANUAL LCA2/0-38F-X Panduit
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Panduit
Model : LCA2/0-38F-X
Category : Uncategorized