BASH-4002 - Headphones Basher - Free user manual and instructions
Find the device manual for free BASH-4002 Basher in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Over-Ear Headphones |
| Brand | Basher |
| Model | BASH-4002 |
| Connectivity | Bluetooth 5.0 and 3.5 mm AUX input |
| Driver Size | 40 mm neodymium drivers |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 32 Ohm |
| Sensitivity | 105 dB ± 3 dB |
| Microphone | Built-in noise-cancelling microphone |
| Battery Life | Up to 20 hours of playback |
| Charging Time | Approximately 2 hours |
| Charging Port | USB-C |
| Operating Range | 10 meters |
| Weight | 250 grams |
| Dimensions | 185 x 170 x 85 mm |
| Foldable Design | Yes, swiveling ear cups |
| Controls | On-ear buttons for volume, playback and calls |
| Earpad Material | Soft memory foam with leatherette finish |
| Compatibility | Smartphones, tablets, PC, Mac and gaming consoles |
| Maintenance | Clean with a soft, dry cloth |
| Safety Warning | Listen at moderate volume to protect your hearing |
| Spare Parts Availability | Replacement ear cushions and audio cable available |
Frequently Asked Questions - BASH-4002 Basher
How do I put my BASH-4002 in pairing mode?
Press and hold the power button for about 5 seconds until the LED flashes red and blue alternately. The headphones will enter Bluetooth pairing mode. Enable Bluetooth on your device and select 'BASH-4002'.
How long does the battery take to charge and how long does it last?
Fully charging via USB-C takes about 2 hours and gives you up to 20 hours of playback. A quick 10-minute charge can provide roughly 2 extra hours when you are in a hurry.
Can I use the headphones wired while the battery is dead?
Yes. Plug the included 3.5 mm audio cable into the AUX input. The headphones work in passive wired mode, so you can keep listening even with a flat battery.
How do I reset my BASH-4002?
Turn off the headphones, then press and hold the volume up and power button simultaneously for about 8 seconds. The LED will flash purple twice to confirm the reset. Re-pair with your device.
How do I connect to a laptop or PC?
You can either use a Bluetooth connection or plug the 3.5 mm cable into the audio jack. For Bluetooth, pair as you would with a smartphone. Most PCs support Bluetooth 5.0; otherwise use the AUX cable.
How do I switch between two connected devices?
With Bluetooth Multipoint, connect the headphones to two devices simultaneously. To switch, simply pause audio on one device and press play on the other. If not supported, disconnect the first device and pair the second.
Can I answer calls with the headphones?
Yes. The built-in microphone allows you to take calls. Press the multifunction button once to answer and once to end, hold for 2 seconds to reject a call.
How should I clean and maintain my headphones?
Wipe the ear cushions and headband with a soft, slightly damp cloth. Do not use solvents or submerge the headphones. Store them in a dry place and remove the cable gently to keep connections clean.
Are spare parts available for the BASH-4002?
Replacement ear cushions and 3.5 mm cables are available from Basher customer service or authorized resellers. This helps extend the product lifetime and maintain comfort.
What should I do if there is no sound?
Check the volume level of your device and make sure the headphones are connected. Try restarting the headphones or resetting them. If using wired mode, ensure the cable is fully inserted.
User questions about BASH-4002 Basher
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual BASH-4002 - Basher and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BASH-4002 by Basher.