DGX-O-DXL - Uncategorized AMX - Free user manual and instructions
Find the device manual for free DGX-O-DXL AMX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DXLink Output Card for AMX DGX Matrix Switcher |
| Brand | AMX |
| Model | DGX-O-DXL |
| Compatibility | AMX DGX series modular matrix switchers |
| Number of Outputs | 4 independent DXLink outputs |
| Connector Type | RJ45 for DXLink twisted-pair connections |
| Video Resolution | Up to 3840x2160 at 30 Hz (4K UHD) |
| Audio Support | Embedded audio pass-through |
| Control | Managed via DGX matrix switcher controller |
| LED Indicators | Power, Link, and Activity status LEDs |
| Dimensions (W x H x D) | 28.0 cm x 15.0 cm x 2.0 cm |
| Weight | 0.5 kg |
| Power Source | Supplied by the DGX matrix switcher backplane |
| Power Consumption | 10 W |
| Operating Temperature | 0 to 40 degrees Celsius |
| Storage Temperature | -20 to 70 degrees Celsius |
| Humidity | 10% to 90% non-condensing |
| Installation | Plug into an available output card slot in the DGX chassis |
| Maintenance | Clean with a soft dry cloth; avoid liquids and abrasive cleaners |
| Safety | Designed for rack-mount installations; follow local electrical codes |
| Spare Parts & Repairability | No user-serviceable parts; replacement cards available from AMX |
| Certifications | CE, RoHS compliant |
Frequently Asked Questions - DGX-O-DXL AMX
What is the AMX DGX-O-DXL card used for?
The DGX-O-DXL is a DXLink output card designed for AMX DGX series matrix switchers. It provides 4 independent outputs for routing video and audio signals to remote displays over twisted-pair cable.
How do I install the DGX-O-DXL in my DGX matrix switcher?
First, ensure the matrix switcher is powered off. Insert the card into an available output card slot until it clicks securely, then fasten any retaining screws. Power on the system and verify the LEDs light up.
What types of cables are compatible with the DGX-O-DXL?
The card uses RJ45 connectors with twisted-pair cable (Cat5e or better). AMX DXLink cable is recommended for optimal signal integrity and distance.
What is the maximum video resolution supported?
The DGX-O-DXL supports resolutions up to 3840x2160 at 30 Hz (4K UHD). For higher frame rates, check the model-specific specs or use a 4K-60 variant.
Does the output card support audio?
Yes, the card supports embedded audio pass-through, allowing audio to travel along with the video signal when the source provides it.
How many DGX-O-DXL cards can I install in one DGX chassis?
The number depends on your DGX model's slot capacity. For example, a DGX32 has 32 slots, so you can mix cards as long as the total power and heat limits are respected.
Can the DGX-O-DXL be hot-swapped?
AMX recommends powering down the matrix switcher before removing or inserting cards. Hot-swapping is not officially supported to prevent damage and signal disruption.
How should I clean the DGX-O-DXL card?
Use a soft, lint-free dry cloth to wipe the card surface. Do not use liquid cleaners or abrasive materials. Always disconnect power before cleaning to avoid electrostatic damage.
What do the LED indicators on the card mean?
The Power LED shows the card is receiving power, Link LED indicates a valid connection to a compatible endpoint, and Activity LED blinks when data is being transmitted. Refer to the manual for error patterns.
Where can I find the user manual for the DGX-O-DXL?
The manual is available on our website under the Downloads section in PDF format. You can also use the AI Question feature for immediate assistance.
User questions about DGX-O-DXL AMX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DGX-O-DXL - AMX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DGX-O-DXL by AMX.