Pro Diver 15253 - Wristwatch INVICTA - Free user manual and instructions
Find the device manual for free Pro Diver 15253 INVICTA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Wristwatch |
| Brand | INVICTA |
| Model | Pro Diver 15253 |
| Movement type | Quartz |
| Case material | Stainless steel |
| Case diameter | 40 mm |
| Case thickness | 12 mm |
| Band material | Stainless steel bracelet |
| Band width | 20 mm |
| Clasp type | Fold-over safety clasp |
| Water resistance | 200 m (660 ft) |
| Crystal | Flame Fusion crystal |
| Bezel | Uni-directional rotating bezel |
| Functions | Hour, minute, second, date |
| Luminosity | Luminous hands and markers |
| Power source | Battery (SR626SW) |
| Battery life | Approximately 2 years |
| Weight | Approximately 180 g |
| Care and cleaning | Rinse with fresh water after sea use; wipe with a soft cloth |
| Safety | Keep the crown screwed down; do not operate it underwater |
| Spare parts and repairability | Battery replacement, bracelet sizing, and crystal replacement available |
| General information | Free user manual download from manufacturer's website |
Frequently Asked Questions - Pro Diver 15253 INVICTA
How do I set the date on my Invicta Pro Diver 15253?
Unscrew the crown counterclockwise until it pops out. Pull it to the first position and turn it clockwise to adjust the date. Avoid setting the date between 9 PM and 3 AM to prevent damage.
Is the Pro Diver suitable for professional diving?
With a water resistance of 200 meters, it is suitable for recreational diving. It is not a professional dive computer, but it meets ISO standards for dive watches.
How do I replace the battery?
Remove the case back with a proper wrench, replace the SR626SW battery, and ensure the gasket is properly seated to maintain water resistance. It is recommended to have this done by a professional.
How can I adjust the bracelet size?
The bracelet has removable links secured by screws. Use a small screwdriver to remove the screws and take out links. Also, the clasp has micro-adjustment holes for fine tuning.
How do I use the rotating bezel?
The uni-directional bezel is used to measure elapsed time. Align the zero marker with the minute hand before starting a dive, then read the elapsed time at the bezel marker relative to the minute hand.
What is the screw-down crown for?
The screw-down crown locks the stem to keep water out. Always ensure it is tightened before swimming or diving.
How should I clean my watch?
Rinse it with fresh water after exposure to salt or chlorine, then wipe it with a soft, lint-free cloth. For deeper cleaning, use a mild soapy solution and a soft brush.
Does the watch glow in the dark?
Yes, the hands and hour markers are coated with luminous material for low-light visibility.
What battery does the watch use?
It uses a Renata 321 or equivalent SR626SW battery, which typically lasts about 2 years.
How do I set the time?
Unscrew the crown, pull it to the second position, and turn it to set the hands. Make sure the hour hand is correct for AM/PM, then push the crown back and screw it down.
User questions about Pro Diver 15253 INVICTA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wristwatch in PDF format for free! Find your manual Pro Diver 15253 - INVICTA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Pro Diver 15253 by INVICTA.
USER MANUAL Pro Diver 15253 INVICTA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INVICTA
Model : Pro Diver 15253
Category : Wristwatch