UPR11 - Pressure washer ELECTROLUX - Free user manual and instructions
Find the device manual for free UPR11 ELECTROLUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pressure Washer |
| Brand | Electrolux |
| Model | UPR11 |
| Power Supply | 230 V ~ 50 Hz |
| Motor Power | 1800 W |
| Maximum Pressure | 130 bar |
| Rated Pressure | 110 bar |
| Water Flow Rate | 500 L/h |
| Max Water Inlet Temperature | 40 °C |
| High-Pressure Hose Length | 6 m |
| Detergent Tank | Integrated detergent reservoir for foam application |
| Water Supply Mode | Connected to mains water supply |
| Safety Features | Automatic shut-off, trigger safety lock, thermal overload protection |
| Maintenance | Clear water tank and filter regularly; store in frost-free place |
| Spare Parts Availability | Replacement nozzles, hoses and O-rings available from service partners |
| Weight | 8.2 kg |
| Dimensions (W x H x D) | 30 x 58 x 38 cm |
| Accessories Included | Spray lance, variable jet nozzle, high-pressure hose |
Frequently Asked Questions - UPR11 ELECTROLUX
How do I connect the Electrolux UPR11 to a water supply?
Connect the high-pressure hose to the water inlet and attach a garden hose (minimum 1/2 inch) to the water connector. Ensure the water supply is turned on and the filter is clean before starting. Never run the pump dry to avoid damage.
Can I use detergent with the UPR11?
Yes, use the integrated detergent reservoir and fit the black detergent nozzle. The detergent will be mixed with water automatically. After use, flush the system with clean water to avoid residue build-up.
What should I do if the pressure seems low?
Check for air leaks, kinks in the hose, or a clogged water filter. Make sure the inlet water supply is sufficient and the nozzle is not worn. Clean or replace the nozzle if necessary.
How do I start and stop the pressure washer safely?
Trigger the spray gun to release air before starting the motor. Always press and lock the trigger safely when switching off. Use the on/off switch and disconnect power after operation.
What maintenance is required after each use?
Disconnect water and power, press the trigger to release residual pressure. Rinse the detergent tank, wipe the unit dry, and store it in a frost-free location. Check the filter and O-rings regularly.
What water temperature can I use?
The UPR11 accepts cold water only, up to a maximum temperature of 40 °C. Never feed hot or boiling water, as this will damage the seals and pump.
Can the machine draw water from a tank or other static source?
The UPR11 is designed for connection to a pressurised mains supply. If using a static water tank, ensure it is placed above the pump and use a suitable suction hose with a filter. Gravity feed helps prevent dry running.
What safety devices are built in?
It includes automatic shut-off when the trigger is not pressed, a trigger locking mechanism, thermal overload protection, and the motor restarts smoothly when the trigger is squeezed. Always use a residual current device with outdoor sockets.
How do I install or replace the spray nozzle?
Push the nozzle into the lance until it clicks. To remove it, press the release button and pull the nozzle off. Always use genuine Electrolux parts to maintain the 130 bar working pressure.
How can I get spare parts for the UPR11?
Authorised Electrolux service centres stock hoses, O-rings, nozzles, filters and trigger guns. You can contact Electrolux support with your model number to order factory-made parts.
User questions about UPR11 ELECTROLUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual UPR11 - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UPR11 by ELECTROLUX.