SATDUPUE - Uncategorized StarTech.com - Free user manual and instructions
Find the device manual for free SATDUPUE StarTech.com in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | SATA hard drive duplicator dock |
| Brand | StarTech.com |
| Model | SATDUPUE |
| Compatible drive form factors | 2.5" and 3.5" SATA HDD/SSD |
| Number of drive bays | 2 (source and target) |
| Host interface | USB 3.0 (backward compatible with USB 2.0) |
| USB data transfer rate | Up to 5 Gbps |
| SATA interface for cloning | SATA III (6 Gbps) |
| Standalone clone function | Yes, one-button offline cloning |
| Clone speed | Up to 36 GB/min (depending on drive speed) |
| Power adapter | External AC/DC adapter included |
| Input voltage | 100-240V AC, 50/60Hz |
| Dimensions (L x W x H) | 165 x 120 x 70 mm (approx.) |
| Weight | 450 g (approx., without drives) |
| LED indicators | Power, source and target activity, clone status |
| Cooling | Integrated fan for heat dissipation |
| Operating systems supported (USB mode) | Windows, macOS, Linux |
| UASP support | Yes with compatible systems |
| Maintenance and cleaning | Wipe the exterior with a dry soft cloth; remove dust from vents with compressed air. |
| Safety warnings | Only use the included power adapter; keep away from water; avoid opening the enclosure; discontinue use if damaged. |
| Spare parts and repairability | No user-replaceable parts; contact StarTech.com technical support for service. |
Frequently Asked Questions - SATDUPUE StarTech.com
What is the SATDUPUE used for?
The StarTech.com SATDUPUE is a dual-bay SATA dock that lets you clone a drive to another drive without a computer, or connect a single drive to your PC via USB 3.0 for data access and transfer.
Does it support both SSDs and HDDs?
Yes, the SATDUPUE supports 2.5-inch and 3.5-inch SATA drives, including both SSDs and HDDs, making it versatile for upgrading or duplicating drives.
How do I clone a drive without a computer?
With the power off, insert the source drive into the Source slot and the target drive into the Target slot. Connect the power adapter, then press the Clone button. The LED will indicate progress. Do not power off or remove drives during cloning. The device clones at sector level, so the target drive must be equal to or larger than the source.
Can I use the dock as an external hard drive enclosure to access files?
Yes. Plug the dock via USB to your computer, insert a single SATA drive into the Source slot (or designated slot), and it appears as an external drive. The USB 3.0 connection provides high-speed access.
What is the maximum hard drive capacity supported?
The SATDUPUE supports SATA drives up to 10 TB or more, as long as the drive is SATA I/II/III. For clone mode, the target drive capacity must be at least equal to the source drive's capacity.
How do I connect the device to my computer via USB?
Insert the included USB 3.0 cable into the rear USB port of the dock and the other end to your computer. Then insert the SATA drive into the dock and turn on the power. The device is plug-and-play on Windows, macOS, and Linux; no drivers are needed for basic operation.
What do the LED indicators mean?
The dock has LEDs for power, source activity, and target activity. During cloning, a dedicated clone status LED blinks, then stays lit when copying is complete. A blinking target LED indicates read/write activity.
Is the device compatible with USB 2.0?
Yes, the SATDUPUE is backward compatible with USB 2.0, though data transfer speeds will be limited to USB 2.0 rates (up to 480 Mbps). For best performance, use a USB 3.0 port.
Can I clone drives of different sizes?
Yes, you can clone a smaller source drive to a larger target drive. The SATDUPUE copies the entire source disk, leaving the extra space on the target as unallocated. You cannot clone a larger drive to a smaller drive, because the clone function is block-by-block.
Do I need to install drivers for Windows or macOS?
No. The SATDUPUE uses the standard mass storage driver built into Windows, macOS, and Linux. For Windows, it is advisable to have the latest USB 3.0 drivers for your motherboard or USB controller.
User questions about SATDUPUE StarTech.com
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SATDUPUE - StarTech.com and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SATDUPUE by StarTech.com.
USER MANUAL SATDUPUE StarTech.com
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : StarTech.com
Model : SATDUPUE
Category : Uncategorized