Panoram V10 - Bike computer Topeak - Free user manual and instructions
Find the device manual for free Panoram V10 Topeak in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bike Computer |
| Brand | Topeak |
| Model | Panoram V10 |
| Display | LCD, multi-line display |
| Mounting | Quick-release bracket for handlebar |
| Battery | CR2032 coin cell (included) |
| Battery Life | Approximately 1 year under normal use |
| Dimensions | 4.5 x 5.5 x 2.0 cm (approx.) |
| Weight | 45 g (including battery) |
| Water Resistance | Splash resistant (IPX4) |
| Sensor Type | Wired speed sensor with mounting kit |
| Speed Functions | Current, average, and maximum speed |
| Distance Functions | Trip distance and total odometer up to 9999.9 km |
| Clock | 12/24 hour clock |
| Auto Start/Stop | Automatic start/stop when riding |
| Operating Temperature | -10°C to 50°C |
| Maintenance | Wipe with clean, dry cloth; avoid harsh solvents |
| Cleaning | Remove battery during prolonged storage |
| Safety Notes | Ensure secure mounting; position display for safe riding |
| Spare Parts & Repairability | Replaceable battery and accessory mounts available |
Frequently Asked Questions - Panoram V10 Topeak
How do I install the Panoram V10 on my bike?
Mount the bracket securely on the handlebar using the included rubber pad and zip ties. Slide the computer into the bracket until it clicks. Ensure the sensor and magnet are aligned on the fork and spoke.
How do I replace the battery?
Turn the unit over and open the battery compartment with a coin. Replace the old CR2032 with a new one, ensuring the positive side faces up. Close the cover until it snaps.
Is the Panoram V10 waterproof?
The unit is splash resistant and can withstand rain and moisture, but should not be submerged. Dry it with a cloth if it gets wet.
What does the auto start/stop function do?
The computer automatically starts timing and distance recording when it detects wheel movement and stops when you halt, saving battery and ensuring accurate trip data.
How do I reset the trip distance?
Press and hold the right button for three seconds to reset the trip distance (Trip). The total odometer (ODO) cannot be reset.
What is the maximum odometer reading?
The total odometer can display up to 9999.9 km (or miles) and then restarts from zero.
Does the computer have a backlight?
No, the Panoram V10 uses a reflective LCD for daylight visibility. In low light, use an external light source.
How do I calibrate the wheel size?
Consult the user manual for the wheel size chart. Set the correct circumference (in mm) using the set button on the back of the unit.
Can I replace the mounting parts?
Yes, replacement brackets and sensor kits are available through Topeak dealers. Contact customer support for part numbers.
How do I maintain the bike computer?
Wipe the display and housing with a soft, dry cloth. Avoid cleaning solvents. Remove the battery when storing the unit for more than three months to prevent leakage.
User questions about Panoram V10 Topeak
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Bike computer in PDF format for free! Find your manual Panoram V10 - Topeak and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Panoram V10 by Topeak.
USER MANUAL Panoram V10 Topeak
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Topeak
Model : Panoram V10
Category : Bike computer