KB-TZ2 CS - Uncategorized HILTI - Free user manual and instructions
Find the device manual for free KB-TZ2 CS HILTI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Mechanical expansion anchor for concrete |
| Brand | Hilti |
| Model | KB-TZ2 CS |
| Material | Carbon steel, zinc plated |
| Surface Finish | Zinc plating for corrosion resistance in indoor environments |
| Diameter Range | M6 to M20 (metric) |
| Length Options | 30 mm to 300 mm depending on anchor size |
| Installation Method | Torque-controlled expansion setting with pre-drilled hole |
| Suitable Base Material | Cracked and uncracked concrete |
| Thread Type | Metric thread per ISO standards |
| Typical Weight | 0.04 to 0.60 kg per piece (size dependent) |
| Intended Use | Securing structural supports, railings, cable trays, and other load-bearing fixtures |
| Corrosion Resistance | Zinc plated; suitable for dry indoor applications |
| Certifications | ETA-06/0106 (European Technical Assessment) |
| Maintenance | Inspect periodic tension on the anchor; re-torque if necessary |
| Cleaning | Wipe with a dry cloth to remove dust and debris |
| Storage | Store in a dry place to prevent corrosion |
| Safety Precautions | Wear safety glasses and gloves during drilling and installation; follow installation parameters |
| Spare Parts and Accessories | Setting tools and drill bits available separately |
| Repairability | Not repairable; replace the anchor if damaged or corroded |
Frequently Asked Questions - KB-TZ2 CS HILTI
What is a Hilti KB-TZ2 CS anchor?
The Hilti KB-TZ2 CS is a torque-controlled expansion anchor made of carbon steel with zinc plating. It is designed for high-load applications in cracked and uncracked concrete.
How do I install a KB-TZ2 CS anchor?
Drill a hole to the specified diameter and depth, clean the hole of dust and debris, insert the anchor, then tighten the nut to the manufacturer's recommended torque. The expansion sleeve will wedge against the concrete, creating a secure hold.
What drill bit size is required for KB-TZ2 CS?
The drill bit diameter matches the anchor diameter (e.g., M10 anchor requires a 10 mm drill bit). Always use a drill bit with a hardness suitable for concrete.
What torque setting should be used for installation?
Torque depends on the anchor size. For example, an M10 anchor typically requires 40-60 N·m. Refer to the technical data sheet for exact values to avoid over tightening, which can damage the concrete.
Can the KB-TZ2 CS be used in cracked concrete?
Yes, the KB-TZ2 CS is specifically evaluated for cracked concrete applications, making it suitable for seismic zones and structural connections where cracking is possible.
How can I remove a KB-TZ2 CS anchor if needed?
To remove, fully unscrew the nut and push the anchor into the hole, or use a extraction tool to pull the sleeve out. The remaining hole can be filled with epoxy mortar if no longer needed.
Is the KB-TZ2 CS corrosion resistant?
The anchor has a zinc plating that provides moderate corrosion resistance for dry indoor environments. For outdoor or humid conditions, choose a stainless steel version (e.g., KB-TZ2 SS).
What safety precautions should I take during installation?
Wear safety glasses, hearing protection, and gloves. Follow the drilling parameters and use sharp drill bits. Ensure the concrete is sound and free of hidden reinforcement.
Are setting tools available separately for this anchor?
Yes, Hilti offers setting tools that ensure proper installation depth and torque. These tools help achieve consistent results and are available from Hilti distributors.
What is the load capacity of the KB-TZ2 CS anchor?
Load capacity varies with anchor size and concrete strength. For example, an M10 anchor may hold approximately 6 kN in tension in C20/25 concrete. Always verify with the engineering data for your specific application.
User questions about KB-TZ2 CS HILTI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual KB-TZ2 CS - HILTI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KB-TZ2 CS by HILTI.
USER MANUAL KB-TZ2 CS HILTI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HILTI
Model : KB-TZ2 CS
Category : Uncategorized