MP692 - Loudspeaker Diamond Audio - Free user manual and instructions
Find the device manual for free MP692 Diamond Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 6" x 9" 2-Way Coaxial Loudspeaker |
| Brand | Diamond Audio |
| Model | MP692 |
| Peak Power Handling | 250 Watts per pair |
| RMS Power Handling | 125 Watts per pair |
| Frequency Response | 40 Hz - 20 kHz |
| Impedance | 4 Ohms |
| Sensitivity | 91 dB @ 1W/1m |
| Driver Dimensions (W x H) | 6" x 9" (152 mm x 229 mm) |
| Tweeter Type | 1" (25 mm) PEI dome tweeter |
| Grille | Included with each speaker |
| Mounting Depth | 3.5" (89 mm) |
| Cutout Dimensions | 5.7" x 8.6" (145 mm x 218 mm) |
| Speaker Weight | 3.3 lb (1.5 kg) per pair |
| Recommended Amplifier Power | 10 - 125 Watts RMS per channel |
| Cone Material | Polypropylene injection-molded |
| Surround Material | Rubber for durability |
| Magnet Assembly | Ferrite magnet with high energy |
| Installation Type | Coaxial full range, fits 6" x 9" openings |
| Maintenance | Wipe gently with a soft, dry cloth |
| Safety Warnings | Avoid exposure to excessive heat and liquids |
| Spare Parts Availability | Service through authorized Diamond Audio dealers |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - MP692 Diamond Audio
What are the key specifications of the Diamond Audio MP692?
The MP692 is a 6"x9" 2-way coaxial loudspeaker with a peak power of 250 watts, RMS of 125 watts, and a 4-ohm impedance. Its frequency response spans 40 Hz to 20 kHz with a sensitivity of 91 dB.
Can I install the MP692 in my car's rear deck?
Yes, the MP692 is designed to fit standard 6"x9" openings in rear decks. Make sure the mounting depth of 3.5 inches is compatible with your vehicle's deck clearance.
What is the recommended amplifier power for the MP692?
Diamond Audio recommends using an amplifier delivering 10 to 125 watts RMS per channel. Matching the RMS rating helps ensure optimal performance and speaker longevity.
How do I clean the MP692 speakers?
Use a soft, dry cloth to gently dust off the cone and surround. Avoid water, solvents, or compressed air, which can damage the speaker components.
Does the MP692 come with grilles and mounting hardware?
Yes, each speaker includes a mesh grille and mounting screws for a secure installation. Grilles help protect the speaker from damage.
What is the impedance of the MP692?
The MP692 has a nominal impedance of 4 ohms, making it compatible with most car stereo head units and amplifiers.
Can the MP692 handle outdoor or marine environments?
While the MP692 is built with rubber surrounds and a coated cone, it is not fully waterproof. Avoid direct exposure to rain, sprays, or prolonged high humidity.
How do I troubleshoot lack of sound from the MP692?
First, check the wiring connections to ensure the positive and negative terminals are secure. Then verify the stereo's fader and balance controls. If there is still no sound, test the speaker with another source to rule out an amplifier issue.
Are there spare parts available for the MP692?
Diamond Audio offers replacement grilles and mounting hardware through authorized dealers. For internal repairs, contact a qualified service center.
What type of car audio system is the MP692 suitable for?
The MP692 is ideal for full-range coaxial replacement in vehicles with existing 6"x9" speaker locations. It works well with factory or aftermarket stereos and can be paired with a subwoofer for enhanced bass.
User questions about MP692 Diamond Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual MP692 - Diamond Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MP692 by Diamond Audio.