LS5074RFTSM - Radio module JUNG - Free user manual and instructions
Find the device manual for free LS5074RFTSM JUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Radio module |
| Brand | JUNG |
| Model | LS5074RFTSM |
| Mounting type | Flush-mounted for LS design series |
| Communication | Radio frequency (RF) 868 MHz |
| Range | Up to 100 m free field, 30 m indoors |
| Power supply | 3V lithium battery (CR2032) |
| Battery life | Approx. 5 years under normal use |
| Number of channels | 2 channels (switch / dim / shutters) |
| Control functions | Switching, dimming, blind control, scene storage |
| Operating temperature | -5°C to +45°C |
| Protection rating | IP20 |
| Dimensions (WxHxD) | 55 x 55 x 35 mm |
| Weight | Approx. 40 g |
| Compatibility | JUNG radio actuators and JUNG HOME systems |
| Instructions | Easy integration with compatible JUNG radio components |
| Maintenance | Clean with dry cloth; no special maintenance required |
| Safety | No user-serviceable parts; installation by authorized electrician |
| Spare parts | Replacement unit required; no replaceable internal parts |
| General information | Designed for JUNG LS range, 55 mm flush-mounting |
Frequently Asked Questions - LS5074RFTSM JUNG
How do I pair the LS5074RFTSM with an actuator?
To pair the module, press the programming button on the actuator and then activate the module within the specified time. Detailed steps are provided in the JUNG radio system manual.
What battery does the module use and how long does it last?
The module uses a 3V CR2032 lithium battery. Under typical use, the battery lasts approximately 5 years. When the battery is low, the range may decrease.
Can I use the LS5074RFTSM to control LED lamps?
Yes, the module can be used with compatible JUNG radio dimming actuators. Ensure the actuator supports LED loads and check the minimum load requirements.
How do I reset the module to factory settings?
To reset, press and hold the programming button for at least 5 seconds until the LED flashes. This clears all paired connections and restores defaults.
What is the wireless range of the module?
In an open field, the range is up to 100 meters. Inside buildings, the range is typically 30 meters, depending on wall construction and interference.
Is the module compatible with existing JUNG installations?
The LS5074RFTSM is designed to work with JUNG radio components and the JUNG HOME system. It fits mechanically into the LS frame system.
How many radio channels does the module support?
The module supports 2 independent channels, allowing control of two different loads or functions, such as light and blind.
What should I do if the module does not respond?
First check the battery and replace if necessary. Ensure the module is within range of the actuator. If problems persist, perform a factory reset and re-pair the device.
Can I use it to control blinds and shutters?
Yes, the module can be used with compatible JUNG radio blind actuators. It supports up/down control and intermediate positions via scene commands.
Is professional installation required?
For safety and proper function, installation should be performed by an authorized electrician according to local regulations. The module is a wired component that must be correctly connected.
User questions about LS5074RFTSM JUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Radio module in PDF format for free! Find your manual LS5074RFTSM - JUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LS5074RFTSM by JUNG.
USER MANUAL LS5074RFTSM JUNG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JUNG
Model : LS5074RFTSM
Category : Radio module