10GBASE-SR-WR - Network component Wire Technologies - Free user manual and instructions
Find the device manual for free 10GBASE-SR-WR Wire Technologies in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | SFP+ 10GBASE-SR Fiber Optic Transceiver Module |
| Brand | Wire Technologies |
| Model | 10GBASE-SR-WR |
| Form Factor | SFP+ Hot-Pluggable |
| Data Rate | 10.3125 Gbps |
| Wavelength | 850 nm |
| Connector | Duplex LC/UPC |
| Fiber Type | Multimode OM3/OM4 |
| Max Distance | 300 m (OM3), 400 m (OM4) |
| Optical Output Power | Approx. -7.3 to -1 dBm |
| Receiver Sensitivity | Approx. -11.1 dBm |
| Digital Diagnostics | DDM/DOM supported |
| Operating Voltage | 3.3 V |
| Power Consumption | Less than 1 W |
| Operating Temperature | 0 to 70 °C |
| Storage Temperature | -40 to 85 °C |
| Dimensions (W x H x D) | 13.7 mm x 8.5 mm x 56.5 mm |
| Weight | Approx. 0.06 kg |
| Compliance | SFP+ MSA, RoHS |
| Main Functions | High-speed optical-to-electrical data conversion for 10G Ethernet links |
| Maintenance and Cleaning | Clean LC connectors with fiber-safe wipes; inspect end faces and keep protective caps on |
| Safety | Class 1 laser; do not look into the optical beam; use ESD precautions |
| Spare Parts and Repairability | Non-field-serviceable; replace the SFP+ module if faulty |
| General Information | Designed for enterprise and data center 10G Ethernet networking |
Frequently Asked Questions - 10GBASE-SR-WR Wire Technologies
Is the Wire Technologies 10GBASE-SR-WR compatible with my switch?
The module follows standard SFP+ MSA specifications and works with most switches, routers, and network interface cards that accept SFP+ 10GBASE-SR modules. Verify that your device has a compatible SFP+ port and supports the 10GBASE-SR standard.
What fiber optic cable should I use with this module?
Use multimode fiber with duplex LC connectors. OM3 fiber supports up to 300 meters and OM4 supports up to 400 meters. Do not use single-mode fiber with this SR model.
How do I clean the optical ports of the module?
Inspect the fiber connector end faces and clean them with a dry lint-free optical wipe or an approved fiber cleaning pen. Keep the dust caps on the module whenever the fiber is disconnected, and avoid touching the ferrule.
Can I use this module in a Gigabit Ethernet port?
No, the 10GBASE-SR-WR is designed for 10 Gbps Ethernet. It should be installed in an SFP+ port that supports 10GBASE-SR. Some dual-rate ports may support 1G/10G, but confirm compatibility before use.
What is the maximum transmission distance of the 10GBASE-SR-WR?
The maximum distance is 300 meters over OM3 multimode fiber and approximately 400 meters over OM4 multimode fiber.
Does this module support digital diagnostics monitoring?
Yes, it supports DDM/DOM (Digital Diagnostic Monitoring / Digital Optical Monitoring). The host system can read optical transmit power, received power, temperature, voltage, and laser bias current.
What is the power consumption of the module?
The module typically consumes less than 1 W from a 3.3 V supply. This low power consumption helps minimize heating in high-density switch environments.
Is the module hot-swappable?
Yes, it is hot-pluggable. It can be inserted or removed while the host device is powered on. For safety, disable the port and follow standard ESD precautions during handling.
What safety precautions should I follow when handling this module?
This is a Class 1 laser product. Do not stare into the optical ports or view the output beam directly. Always install protective caps when the fiber is unplugged and avoid touching the exposed optical surfaces.
What should I do if the link does not come up?
Check the fiber type and connectors, verify that the SFP+ port is enabled and configured for 10G mode, clean the fiber end faces, test with known-good cables, and use DDM diagnostics to verify optical power levels.
User questions about 10GBASE-SR-WR Wire Technologies
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network component in PDF format for free! Find your manual 10GBASE-SR-WR - Wire Technologies and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 10GBASE-SR-WR by Wire Technologies.
USER MANUAL 10GBASE-SR-WR Wire Technologies
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Wire Technologies
Model : 10GBASE-SR-WR
Category : Network component