AirCam PTZD-630MAI - Security Camera AIRLIVE - Free user manual and instructions
Find the device manual for free AirCam PTZD-630MAI AIRLIVE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera - IP PTZ Dome |
| Brand | AirLive |
| Model | AirCam PTZD-630MAI |
| Category | Network Surveillance Camera |
| Image Sensor | 1/2.8" Progressive Scan CMOS, 2 Megapixels |
| Resolution | 1920 x 1080 at 30 fps |
| Lens | Auto-focus, 20x optical zoom, F1.8 - F3.5 |
| Pan Range | 360° continuous rotation |
| Tilt Range | -10° to 90° with auto flip |
| Night Vision | IR LEDs up to 50 meters |
| Video Compression | H.264, H.265, MJPEG |
| Network Interface | 10/100 Base-T Ethernet with PoE (IEEE 802.3af) |
| Power Supply | DC 12V, 3A or PoE (Power over Ethernet) |
| Weather Protection | IP66 weatherproof housing |
| Operating Temperature | -30°C to 60°C |
| Dimensions (Diameter x Height) | 150 mm x 200 mm |
| Weight | 1.5 kg |
| Storage | MicroSD card slot (up to 128 GB) |
| Audio | Built-in microphone and speaker for two-way audio |
| Motion Detection | Digital motion detection with customizable zones |
| Remote Access | Web browser, AirLive mobile app (iOS/Android) |
| Security | Password protection, HTTPS encryption, WPA2 network security |
| Installation | Mounting bracket included, ceiling or wall mount |
| Maintenance | Clean dome and lens with soft dry cloth; check cable connections periodically |
| Repairability | Non-user-serviceable internal parts; contact AirLive support for service |
Frequently Asked Questions - AirCam PTZD-630MAI AIRLIVE
How do I reset the AirCam PTZD-630MAI to factory settings?
Locate the reset button on the camera housing. Press and hold it for about 10 seconds using a pin or paperclip. The camera will reboot and restore all settings to default. Make sure to reconfigure the network and user credentials after the reset.
Can the camera be powered over Ethernet (PoE)?
Yes, the AirCam PTZD-630MAI supports PoE (Power over Ethernet) standard IEEE 802.3af. Connect a PoE switch or injector to supply both power and data over a single network cable.
How do I access the camera remotely from my smartphone?
Install the AirLive mobile app on your iOS or Android device. On first setup, connect the camera to your network via Ethernet. Use the app to scan the QR code on the camera body or manually add the device by its IP address. Then configure port forwarding or cloud service for remote access.
What is the maximum resolution and frame rate?
The camera delivers 1920 x 1080 resolution at 30 frames per second. This provides clear and smooth video for surveillance applications.
How far can the night vision see?
The built-in infrared LEDs provide night vision up to 50 meters in complete darkness. The camera automatically switches to black-and-white mode in low-light conditions.
Can I record video to a microSD card?
Yes, insert a microSD card up to 128 GB (Class 10 recommended) into the slot. Configure the recording schedule, motion-trigger recording, or continuous recording through the camera's web interface or app.
Is this camera suitable for outdoor installation?
Absolutely. The camera has an IP66 weatherproof rating, meaning it is dust-tight and protected against heavy rain and snow. Operating temperature ranges from -30°C to 60°C, making it suitable for most climates.
How do I set up motion detection alerts?
Access the camera's web interface or mobile app, go to the Motion Detection settings, and draw active zones on the video image. Adjust sensitivity and threshold. Then enable push notifications or email alerts to receive alerts when motion is detected.
What should I do if the camera goes offline?
First, check the power supply and Ethernet cable connections. Verify that your router or switch is working. Reboot the camera by disconnecting power for 30 seconds. If the issue persists, reset the camera to factory settings and reconfigure it. Also make sure your network has a stable internet connection.
Can I use the camera's pan/tilt functions manually?
Yes, you can control pan (360°) and tilt (-10° to 90°) manually via the mobile app or web interface. You can also set preset positions and enable auto patrol patterns for automated monitoring.
User questions about AirCam PTZD-630MAI AIRLIVE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual AirCam PTZD-630MAI - AIRLIVE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AirCam PTZD-630MAI by AIRLIVE.
USER MANUAL AirCam PTZD-630MAI AIRLIVE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AIRLIVE
Model : AirCam PTZD-630MAI
Category : Security Camera