PDIW87 - Loudspeaker Pyle - Free user manual and instructions
Find the device manual for free PDIW87 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-Wall Loudspeaker |
| Brand | Pyle |
| Model | PDIW87 |
| Speaker Type | 2-Way In-Wall |
| Woofer Size | 8 Inches |
| Tweeter Size | 1 Inches |
| Peak Power Handling | 200 Watts |
| RMS Power Handling | 100 Watts |
| Impedance | 8 Ohms |
| Frequency Response | 50 Hz - 20 kHz |
| Sensitivity | 90 dB |
| Cutout Dimensions | 9.9 x 6.9 Inches |
| Mounting Depth | 3.3 Inches |
| Product Dimensions | 11.5 x 7.5 x 3.4 Inches |
| Weight | 3.5 lbs |
| Material | Polypropylene Woofer, Silk Tweeter |
| Input Type | Speaker Wire Inputs |
| Recommended Amplifier Power | Up to 100 Watts RMS per Channel |
| Installation | In-Wall with Mounting Tabs |
| Maintenance | Wipe with dry cloth; avoid moisture |
| Safety | Turn off amplifier when connecting wires |
| Repairability | Consult certified technician; no user-serviceable parts |
| General Information | Suitable for indoor use; RoHS compliant |
Frequently Asked Questions - PDIW87 Pyle
What are the cutout dimensions for the Pyle PDIW87?
The required cutout is approximately 9.9 x 6.9 inches with a mounting depth of 3.3 inches. Always verify with the included template before cutting.
How do I install the PDIW87 in-wall speaker?
First, trace the template and cut the drywall. Connect the speaker wire to the spring terminals, then insert the speaker and tighten the mounting tabs by turning the screws clockwise. Ensure the amplifier is off during wiring.
What type of speaker wire should I use?
Use 16-14 AWG speaker wire for runs up to 50 feet. For longer distances, use 14 AWG to minimize signal loss.
Can I use the PDIW87 outdoors?
No, this speaker is designed for indoor use only. Exposure to moisture or extreme temperature can damage the drivers and cabinet.
How should I clean the speaker grille and drivers?
Remove the grille and dust it with a soft brush. Wipe the exposed drivers with a dry lint-free cloth. Do not use water or cleaning solvents.
What is the power handling of the PDIW87?
It can handle 100 watts RMS and 200 watts peak. Pair it with an amplifier that delivers up to 100 watts RMS per channel for optimal performance.
Does the speaker have a removable grille?
Yes, the grille is paintable and detachable. You can paint it to match your wall for a discreet installation.
How can I adjust the treble response?
The PDIW87 features a level switch for the tweeter on the front panel. Slide it between the + and 0 positions to boost the high frequencies by 3 dB or keep it neutral.
Is the PDIW87 compatible with a basic home theater receiver?
Yes, the 8-ohm impedance makes it compatible with most receivers. Simply connect positive to positive and negative to negative, ensuring the impedance of all speakers on the same channel is appropriate.
What is the warranty period for this speaker?
Pyle provides a 1-year limited warranty against defects in materials and workmanship. Keep your receipt for service requests.
User questions about PDIW87 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PDIW87 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PDIW87 by Pyle.
USER MANUAL PDIW87 Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PDIW87
Category : Loudspeaker