Commercial 43-0110-00 - Uncategorized Taprite - Free user manual and instructions
Find the device manual for free Commercial 43-0110-00 Taprite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | CO2 Regulator |
| Brand | Taprite |
| Model | Commercial 43-0110-00 |
| Category | Beverage Dispensing Equipment |
| Inlet Connection | CGA-320 Compatible |
| Outlet Connection | 1/4" Swivel Nut with Barb for 1/4" Hose |
| Pressure Adjustment Range | 0 to 60 PSI |
| High Pressure Gauge | 0 to 3000 PSI |
| Low Pressure Gauge | 0 to 60 PSI |
| Body Material | Chrome Plated Brass |
| Diaphragm Material | EPDM |
| Relief Valve | Built-in Automatic Pressure Relief |
| Flow Rate | 80 SCFH (Standard Cubic Feet per Hour) |
| Dimensions (H x W x D) | 5.5" x 4" x 2.75" |
| Weight | 1.2 lbs (0.54 kg) |
| Operating Temperature Range | -10°F to 140°F (-23°C to 60°C) |
| Recommended Dispensing Pressure | 20-30 PSI for Most Beers |
| Maintenance | Wipe with a Dry Cloth; Avoid Water Ingress |
| Repairability | Replaceable Diaphragm and Gauges |
| Certifications | NSF Listed |
| Warranty | 1 Year Limited Warranty |
Frequently Asked Questions - Commercial 43-0110-00 Taprite
How do I connect this regulator to my CO2 tank?
Attach the CGA-320 inlet nut to the tank valve and tighten securely with a wrench. Ensure a seal is present on the tank valve before connection.
What PSI should I set for dispensing beer?
For most standard beers, set the low pressure gauge to 20-30 PSI. Adjust based on beer style and serving temperature.
How do I adjust the pressure on the regulator?
Open the CO2 tank valve, then turn the adjustment knob clockwise to increase pressure or counterclockwise to decrease it. Monitor the low pressure gauge.
Why is my high pressure gauge not reading any pressure?
This likely means the CO2 tank is empty or the tank valve is closed. Check the tank weight and open the valve fully.
How often should I service the regulator?
Inspect the regulator annually for wear, leaks, and proper function. Replace the diaphragm every 2-3 years or if you notice pressure creep.
Can I use this regulator with nitrogen or beer gas?
This regulator is designed for CO2 only. Using nitrogen may require a different regulator with higher pressure capabilities. Check with Taprite for specific models.
What do the two gauges on the regulator do?
The high pressure gauge shows the tank pressure remaining in the CO2 cylinder. The low pressure gauge indicates the output pressure to your keg or system.
Is this regulator suitable for commercial use?
Yes, it is labeled Commercial and built with durable chrome-plated brass. It is NSF listed and suitable for high-volume dispensing environments.
How do I clean the regulator safely?
Turn off the gas supply and disconnect the regulator. Wipe the exterior with a dry, lint-free cloth. Do not submerge in water or use harsh chemicals.
What is the warranty and where can I get replacement parts?
The regulator comes with a 1-year limited warranty. Replacement parts like gauges and diaphragms are available through Taprite distributors or directly from the manufacturer.
User questions about Commercial 43-0110-00 Taprite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Commercial 43-0110-00 - Taprite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Commercial 43-0110-00 by Taprite.
USER MANUAL Commercial 43-0110-00 Taprite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Taprite
Model : Commercial 43-0110-00
Category : Uncategorized