Comaq WF1907 - Screen HP - Free user manual and instructions
Find the device manual for free Comaq WF1907 HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LCD Monitor |
| Brand | HP |
| Model | Comaq WF1907 |
| Screen Size | 19 inches |
| Display Resolution | 1440 x 900 pixels |
| Aspect Ratio | 16:10 |
| Brightness | 300 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Viewing Angle | 160° horizontal / 160° vertical |
| Connectivity | VGA, DVI-D |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | 45 W typical, less than 1 W standby |
| Dimensions (W x H x D) | 442 x 370 x 182 mm |
| Weight | 4.5 kg |
| Stand | Tilt adjustment |
| VESA Mounting | 100 x 100 mm |
| Features | Auto-adjust, Plug and Play |
| Package Contents | Monitor, power cord, VGA cable, user manual |
| Maintenance | Wipe with a soft dry cloth |
| Safety | Place on a stable surface, do not block ventilation |
| Reparability | Replaceable stand and cables |
Frequently Asked Questions - Comaq WF1907 HP
How do I connect the HP Comaq WF1907 monitor to my computer?
Use the included VGA cable or a DVI cable to connect the monitor to your computer's graphics card. Tighten the screws on the connector to secure the cable. Then plug in the power cord and press the power button.
What is the recommended resolution for the WF1907?
The native resolution is 1440 x 900 pixels. For optimal sharpness, set your computer to this resolution. You can do this in the display settings of your operating system.
How do I clean the screen safely?
Turn off the monitor and unplug it. Use a soft, dry, lint-free cloth to gently wipe the screen. Do not use abrasive cleaners or liquids directly on the screen. For stubborn marks, slightly dampen the cloth with water.
Why does my monitor show "No Signal"?
Check that the video cable is securely connected to both the monitor and the computer. Ensure the computer is powered on and the correct input source is selected via the monitor's menu. Also verify that the graphics card is outputting a supported signal.
How can I adjust brightness and contrast on the WF1907?
Use the menu buttons on the monitor bezel. Press the menu button, navigate to Picture settings, and select Brightness or Contrast. Adjust using the arrow keys and press the menu button to confirm.
Can I wall-mount this monitor?
Yes, the monitor supports VESA 100 x 100 mm mounting. You will need a compatible wall mount kit. Remove the stand if necessary and follow the mount manufacturer's instructions.
What should I do if the screen flickers?
Screen flicker can be caused by an incorrect refresh rate or a faulty cable. Set the refresh rate to 60 Hz in your display settings. Also check the cable connections and consider replacing the VGA or DVI cable.
How do I switch between VGA and DVI inputs?
Press the input/source button on the monitor to cycle through available inputs. The monitor will display the selected input type (VGA or DVI) on the screen.
Is the monitor compatible with Mac computers?
Yes, the monitor works with Macs that have a VGA or DVI output. If your Mac only has HDMI or USB-C, you may need an adapter to convert the signal.
How much power does the WF1907 consume in standby mode?
In standby mode, the monitor consumes less than 1 W of power. To achieve this, ensure the monitor is plugged into a power outlet and the power button is turned off.
User questions about Comaq WF1907 HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screen in PDF format for free! Find your manual Comaq WF1907 - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Comaq WF1907 by HP.
USER MANUAL Comaq WF1907 HP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HP
Model : Comaq WF1907
Category : Screen