CLT-1MC4 - Uncategorized Crestron - Free user manual and instructions
Find the device manual for free CLT-1MC4 Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cable and Connector Accessory |
| Brand | Crestron |
| Model | CLT-1MC4 |
| Length | 1 meter (3.3 ft) |
| Connector Type | 4-pin terminal block (male to bare wire) |
| Compatibility | Crestron control systems and compatible third-party devices |
| Primary Function | Transmission of control signals (e.g., RS-232, IR, or low-voltage) |
| Cable Shielding | Braided shield for interference reduction |
| Jacket Material | Flexible PVC |
| Color | Black |
| Wire Gauge | 22 AWG stranded (typical) |
| Cable Diameter | Approximately 5 mm (0.2 in) |
| Weight | Approximately 0.05 kg (1.8 oz) |
| Operating Temperature | -40°C to +70°C (-40°F to +158°F) |
| Storage Temperature | -40°C to +80°C (-40°F to +176°F) |
| Certifications | RoHS compliant |
| Installation | Plug and play; screw terminals for secure connection |
| Maintenance | Wipe with a dry cloth; no special care required |
| Safety | Use only with Crestron-approved equipment |
| Spare Parts | No user-serviceable parts; contact Crestron for repairs |
| Warranty | Crestron standard limited warranty |
Frequently Asked Questions - CLT-1MC4 Crestron
What is the Crestron CLT-1MC4?
The CLT-1MC4 is a 1-meter cable with a 4-pin terminal block, designed by Crestron to carry control signals between a control system and external devices.
What types of signals can the CLT-1MC4 carry?
It can carry low-voltage control signals, such as RS-232, IR, or contact closure, depending on the system configuration.
Is the CLT-1MC4 compatible with all Crestron control systems?
The cable is generally compatible with Crestron control processors that feature 4-pin terminal block connectors, but verify your system's pinout before use.
How do I connect the CLT-1MC4?
Connect the 4-pin terminal block to the corresponding output on the Crestron device, and attach the bare wires to the target equipment. Ensure polarity matches the wiring diagram.
Can the CLT-1MC4 be used for power distribution?
No, the CLT-1MC4 is intended for signal transmission only. Do not use it for AC or high-voltage power.
What is the maximum cable length for reliable signal transmission?
While the CLT-1MC4 itself is 1 meter, you can extend it using compatible connectors, but keep total length below 15 meters for reliable RS-232 signals.
Is the cable shielded?
Yes, the CLT-1MC4 features braided shielding to minimize electromagnetic interference in critical installations.
How should I maintain the CLT-1MC4?
Regularly wipe the connector and cable with a dry, lint-free cloth. Avoid bending sharply or exposing to moisture.
Are there spare parts available for the CLT-1MC4?
The cable is a single, non-serviceable unit. If damaged, replace the entire cable; spare connectors are not sold separately.
Where can I download the manual for the CLT-1MC4?
The manual is available as a PDF on notice-facile.com, just use the download button and it will be sent to your email.
User questions about CLT-1MC4 Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual CLT-1MC4 - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CLT-1MC4 by Crestron.
USER MANUAL CLT-1MC4 Crestron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Crestron
Model : CLT-1MC4
Category : Uncategorized