ProSecurity RS10 - Security UNGO - Free user manual and instructions
Find the device manual for free ProSecurity RS10 UNGO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Vehicle Security and Remote Start System |
| Brand | UNGO |
| Model | ProSecurity RS10 |
| Category | Security |
| Remote Control Type | 2-way long-range remote with LED feedback |
| Operating Frequency | 433 MHz |
| Remote Range | Up to 1 mile (1.6 km) in open area |
| Remote Start Function | Yes, supports gasoline and diesel engines |
| Keyless Entry | Yes, with remote trunk release |
| Alarm Siren Output | 120 dB programmable siren with backup battery |
| Shock Sensor | Dual-zone adjustable shock sensor included |
| Valet Mode | Yes, activates to disable alarm while parking |
| Power Source | 12V DC vehicle battery |
| Compatible Vehicles | Most 12V gasoline and diesel vehicles (up to 4-door) |
| Number of Remotes Included | 2 |
| Installation Type | Professional installation recommended |
| Control Unit Operating Voltage | 12V DC (9V–16V range) |
| Power Consumption | Standby: 15 mA; alarm triggered: 200 mA |
| Operating Temperature | -40°C to +85°C |
| Warranty | 1-year limited warranty |
| Maintenance Advice | Test system monthly; replace remote battery yearly |
| Cleaning Instructions | Clean remote with dry soft cloth; avoid liquids |
| What's in the Box | Main unit, 2 remotes, siren, shock sensor, wiring harness, manual |
| Safety Features | Engine immobilizer, anti-carjacking mode, automatic engine shutdown |
| Spare Parts Availability | Replacement remotes, sensors and wiring kits available |
Frequently Asked Questions - ProSecurity RS10 UNGO
How do I install the UNGO ProSecurity RS10?
Installation requires connecting the main control unit, siren, shock sensor and wiring harness to your vehicle's electrical system. It is highly recommended to have a professional installer perform the setup to avoid damaging the system or your car.
Can I use the remote start feature with a manual transmission?
Yes, the RS10 supports manual transmission vehicles. A special reservation mode must be activated before leaving the vehicle to ensure safe remote starting.
What is the remote range of the ProSecurity RS10?
The included 2-way remotes offer a range of up to 1 mile (1.6 km) in open areas. Buildings and obstructions can reduce the effective range.
How do I replace the battery in the remote?
To replace the battery, slide open the remote casing and remove the old CR2032 battery. Insert a new one with the positive side facing up, then close the casing. Test the remote to confirm proper operation.
What should I do if I lose my remote and need to disarm the alarm?
If the remote is lost, you can use the valet mode or the emergency override procedure. Turn the ignition on and off within 5 seconds while pressing the valet button, or follow the manual's override steps to disarm the system.
Does the RS10 work with diesel engines?
Yes, the ProSecurity RS10 is compatible with both gasoline and diesel engines. The system includes a programmable engine type setting to support both ignition types.
How does the shock sensor work and how can I adjust it?
The dual-zone shock sensor detects impact and triggers the alarm. It has two levels: warn zone and alarm zone. You can adjust sensitivity via the control unit’s adjustment screw or through remote programming, depending on the model.
How do I activate valet mode on the RS10?
Press and hold the valet button inside the vehicle for 2 seconds, or use the remote command. In valet mode, the alarm and remote start are disabled while allowing keyless entry. To exit, press the valet button again.
Is the system compatible with hybrid vehicles?
Compatibility with hybrid vehicles depends on the specific model. The RS10 can work with many 12V hybrid systems, but a professional installer should verify the wiring and operating voltage before installation.
What maintenance does the ProSecurity RS10 require?
Test the system monthly by arming and disarming, check all wiring for damage, and replace the remote battery yearly. Keep the remote clean and avoid exposing it to moisture to ensure reliable operation.
User questions about ProSecurity RS10 UNGO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security in PDF format for free! Find your manual ProSecurity RS10 - UNGO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProSecurity RS10 by UNGO.
USER MANUAL ProSecurity RS10 UNGO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : UNGO
Model : ProSecurity RS10
Category : Security