CRDSNU-32-80-P-A - Industrial Automation Festo - Free user manual and instructions
Find the device manual for free CRDSNU-32-80-P-A Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic Cylinder |
| Series | CRDSNU |
| Bore | 32 mm |
| Stroke | 80 mm |
| Mode of Operation | Double-acting |
| Piston Rod Diameter | 10 mm |
| Operating Pressure | 1 to 10 bar |
| Operating Temperature | -20 to 80 °C |
| Fluid | Compressed air (ISO 8573-1:2010) |
| Weight | 0.55 kg |
| Cushioning | Self-adjusting |
| Mounting | With accessories (foot, flange, trunnion) |
| Function | Converts pneumatic energy into linear motion |
| Maintenance | Requires regular lubrication (or maintenance-free with special seals) |
| Cleaning | Wipe with damp cloth; avoid solvents |
| Safety | Do not exceed maximum pressure; use safety valves |
| Spare Parts | Repair kit with seals available from Festo |
| Reparability | Repairable with standard tools |
| Standard | ISO 6431 / VDMA 24562 |
| Certification | Conforms to relevant EU directives |
Frequently Asked Questions - CRDSNU-32-80-P-A Festo
What is the operating pressure range for the CRDSNU-32-80-P-A?
The recommended operating pressure is between 1 and 10 bar. Always ensure the supply is dry and filtered.
How do I mount the cylinder?
The cylinder can be mounted using foot, flange, or trunnion attachments from Festo. Standard mounting holes are provided on the body.
What type of air preparation is required?
Use filtered compressed air with a filtration of 40 µm or finer. If the cylinder is not factory-lubricated, install an air service unit with lubricator.
How do I adjust the cushioning?
This model features self-adjusting cushioning, so no manual adjustment is needed. The cushioning automatically adapts to load and speed.
What is the maximum force produced by the cylinder?
At 10 bar, the theoretical push force is approximately 800 N. The pull force is slightly less due to the piston rod area.
Can the cylinder be repaired?
Yes, the cylinder is repairable. Festo offers a seal repair kit with detailed instructions for replacing worn seals and gaskets.
What is the temperature range?
The cylinder operates in a temperature range of -20 °C to +80 °C, making it suitable for most industrial environments.
How do I clean and maintain the cylinder?
For cleaning, wipe the exterior with a damp lint-free cloth. Do not use aggressive solvents. Periodically check for air leaks and tighten fittings.
What spare parts are available?
Common spare parts include seal kits, piston rod, and cushioning rings. Use the Festo online catalog to find the exact spare parts for model CRDSNU-32-80-P-A.
What does 'P-A' in the model number mean?
In Festo's naming convention, P indicates a piston rod on one side, and A represents the basic variant with no additional optional features.
User questions about CRDSNU-32-80-P-A Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Industrial Automation in PDF format for free! Find your manual CRDSNU-32-80-P-A - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CRDSNU-32-80-P-A by Festo.
USER MANUAL CRDSNU-32-80-P-A Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : CRDSNU-32-80-P-A
Category : Industrial Automation