FVC 2004-EK - Water pump Fieldmann - Free user manual and instructions
Find the device manual for free FVC 2004-EK Fieldmann in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Pump |
| Brand | Fieldmann |
| Model | FVC 2004-EK |
| Power Supply | 220–240 V, 50 Hz |
| Power Rating | 400 W |
| Max Flow Rate | 5000 L/h |
| Max Head | 8 m |
| Max Immersion Depth | 7 m |
| Max Liquid Temperature | 35 °C |
| Pump Type | Submersible pump |
| Housing Material | Stainless steel and plastic |
| Dimensions (H × W × D) | 30 × 18 × 18 cm |
| Weight | 4.6 kg |
| Cable Length | 10 m |
| Protection Rating | IPX8 |
| Operation | Automatic float switch |
| Functions | Pumping clean / dirty water, draining pools, basements |
| Maintenance | Rinse with clean water after use; clean inlet filter regularly |
| Safety Features | Thermal overload protection, IPX8 waterproof enclosure |
| Spare Parts Availability | Replacement impellers, seals, and float switches available |
| Repairability | User-replaceable parts; service manual available |
Frequently Asked Questions - FVC 2004-EK Fieldmann
What type of water can this pump handle?
The FVC 2004-EK is designed for clean or slightly dirty water with particles up to 5 mm. It is not suitable for sewage or flammable liquids.
How do I start the pump?
Ensure the pump is fully submerged and the float switch is free. Connect to a grounded outlet. The pump starts automatically when the water level reaches the switch-on point.
What is the maximum flow rate?
The maximum flow rate is 5000 litres per hour. Actual flow depends on discharge head and hose diameter.
Can I use an extension cord?
Yes, but use a cord with appropriate cross-section (at least 1.5 mm²) and rated for outdoor use. Keep the connection dry and elevated.
How do I clean the pump after use?
Run the pump with clean water for a few minutes, then remove the inlet filter and rinse it under a tap. Dry the outer surfaces before storing.
What should I do if the pump doesn't start?
Check power supply, float switch position, and ensure the impeller is not blocked. If the motor is hot, the thermal protector may have tripped; wait for it to cool down then restart.
Is the pump suitable for continuous operation?
It is designed for intermittent operation. Refer to the duty cycle (e.g., 10 min on / 10 min off) to prevent overheating.
How deep can the pump be submerged?
The maximum immersion depth is 7 meters. Do not exceed this to avoid water ingress.
Can the pump run dry?
No. Running dry will damage the mechanical seal. Always ensure the pump is submerged before switching it on.
Where can I buy spare parts?
Spare parts such as impellers, seals, and float switches are available from Fieldmann authorized service centers or online retailers.
User questions about FVC 2004-EK Fieldmann
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual FVC 2004-EK - Fieldmann and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FVC 2004-EK by Fieldmann.
USER MANUAL FVC 2004-EK Fieldmann
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fieldmann
Model : FVC 2004-EK
Category : Water pump