EMC121L - Air conditioner Mirage - Free user manual and instructions

Find the device manual for free EMC121L Mirage in PDF.

Mirage
📄 39 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Mirage EMC121L - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Type of product Air conditioner (through-the-wall)
Brand Mirage
Model EMC121L
Cooling capacity 12,000 BTU/h
Energy efficiency rating (EER) 9.7
Refrigerant R-410A
Power supply 115 V / 60 Hz
Rated current 10.5 A
Maximum cooling area 550 sq ft (51 m²)
Air flow rate 350 CFM
Operating modes Cool, Fan, Dry
Temperature range 64–90°F (18–32°C)
Control type Digital with remote control
Display LED
Air filter Washable mesh
Air directional control 4-way adjustable louvers
Installation Through-the-wall or window
Dimensions (W x H x D) 24.5 x 19.5 x 18.0 in (62.2 x 49.5 x 45.7 cm)
Net weight 75 lb (34 kg)
Electrical plug 3-prong grounded
Safety features Overload protection, auto restart
Warranty 1 year parts and labor

Frequently Asked Questions - EMC121L Mirage

How do I install the Mirage EMC121L in a wall?
First, measure the wall opening to ensure it matches the sleeve. Slide the chassis into the sleeve, secure it with the screws provided, and plug into a grounded outlet. Seal any gaps with weather stripping.
How often should I clean the air filter?
The filter should be cleaned every two weeks under normal use. Remove it, wash with warm water, let it dry completely, and slide it back.
What is the maximum room size for this unit?
The EMC121L covers up to 550 square feet, making it suitable for large living areas.
Can I use an extension cord with this air conditioner?
No, an extension cord can cause voltage drop and overheating. Always plug directly into a dedicated outlet.
How do I switch to fan-only mode?
Press the Mode button until the display shows Fan; the compressor stops and the fan circulates air.
Why doesn't the unit cool after installation?
Check the thermostat setting, ensure the filter is clean, and look for air leaks around the sleeve. Also, confirm the window/wall is sealed.
Does the dehumidifier mode collect water automatically?
In Dry mode, the unit removes moisture and re-evaporates it; verify the drain if dripping occurs.
How do I reset the air conditioner after power failure?
The unit has auto restart; simply press the Power button once after power is restored and it resumes previous settings.
What maintenance does the coil require?
Once a year, gently vacuum the evaporator coil and condenser coil to remove dust. Avoid bending the fins.
Where can I get replacement parts?
Contact Mirage customer service or authorized dealers. The model number is on the nameplate.

User questions about EMC121L Mirage

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Air conditioner in PDF format for free! Find your manual EMC121L - Mirage and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EMC121L by Mirage.

USER MANUAL EMC121L Mirage

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Mirage

Model : EMC121L

Category : Air conditioner