RCP-1000-48 - Charger Mean Well - Free user manual and instructions
Find the device manual for free RCP-1000-48 Mean Well in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Battery Charger |
| Brand | Mean Well |
| Model | RCP-1000-48 |
| Output Voltage | 48V DC |
| Output Current | 21A (adjustable) |
| Maximum Output Power | 1000W |
| Input Voltage Range | 90-264V AC |
| Input Frequency | 47-63Hz |
| Efficiency | 89% typical |
| Charging Mode | Constant Current/Constant Voltage (CC/CV) |
| Battery Compatibility | VRLA, GEL, AGM, and Li-ion batteries (depending on settings) |
| Adjustable Functions | Output current and charging curve via DIP switches |
| Protections | Short circuit, over voltage, over temperature, reverse polarity |
| Cooling | Variable speed fan, forced air cooling |
| Operating Temperature | -20°C to +70°C (derating above 50°C) |
| Dimensions (L x W x H) | 278 x 124.5 x 90 mm |
| Weight | 1300g |
| Safety Standards | UL TUV CB CE |
| Ingress Protection Rating | IP20 |
| Warranty | 2 years |
| Applications | Electric vehicles, AGVs, robotic platforms, and industrial equipment |
Frequently Asked Questions - RCP-1000-48 Mean Well
What is the RCP-1000-48 used for?
The RCP-1000-48 is a 1000W battery charger designed for charging large battery banks in applications such as electric vehicles, AGVs, and industrial equipment. It provides a robust and reliable charging solution.
What is the output voltage and current?
The charger outputs a nominal 48V DC with a maximum current of 21A. The output current can be adjusted using internal DIP switches to match specific battery requirements.
What battery types can I charge with this charger?
It supports VRLA, GEL, AGM, and Li-ion batteries. The correct charging curve can be selected via DIP switches to suit the battery chemistry and capacity.
How do I adjust the charging current?
Open the charger case and locate the DIP switch block. Use the switch positions to set the desired output current and charging profile according to the model table in the manual. Always disconnect the charger from the mains before adjusting.
Does the RCP-1000-48 provide reverse polarity protection?
Yes, the unit features reverse polarity protection. If the battery leads are connected incorrectly, the charger will not supply power and will prevent damage to itself and the battery.
Is it safe to use in wet or dusty environments?
The charger has a IP20 rating, meaning it is protected against solid objects larger than 12mm but not against water. It should be installed in a dry and clean location with adequate ventilation.
What is the efficiency of the charger?
At full load, the charger achieves up to 89% efficiency. This reduces energy loss and minimizes heat generation, contributing to a longer lifespan.
Can the charger be operated continuously?
The RCP-1000-48 is designed for continuous operation under specified load conditions. However, derating is required if the ambient temperature exceeds 50°C. Refer to the temperature derating curve in the manual.
How many charging stages does it have?
It utilizes a CC/CV charging algorithm with selectable charging curves, typically providing constant current followed by constant voltage, and then a floating charge stage. Specific stages depend on the selected battery type.
What safety certifications does the charger have?
The unit is certified with UL, TUV, CB, and CE standards, ensuring compliance with international safety requirements for industrial power supplies.
User questions about RCP-1000-48 Mean Well
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Charger in PDF format for free! Find your manual RCP-1000-48 - Mean Well and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RCP-1000-48 by Mean Well.