AG90SS - Range hood ILVE - Free user manual and instructions
Find the device manual for free AG90SS ILVE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-mounted Range Hood |
| Brand | ILVE |
| Model | AG90SS |
| Width | 90 cm / 900 mm |
| Depth | 50 cm / 500 mm |
| Height | 43 cm / 430 mm (adjustable) |
| Weight | 15 kg (approx.) |
| Power Supply | 220-240 V, 50 Hz |
| Motor Power | 200 W |
| Extraction Capacity | 650 m³/h (max) |
| Number of Speeds | 3 |
| Lighting | 2 x 20 W halogen (replaceable) |
| Filter Type | Washable aluminium grease filter |
| Control Type | Electronic push-button controls |
| Installation | Ducted or recirculating (carbon filter optional) |
| Noise Level | 45-65 dB (depending on speed) |
| Safety Features | Overheat protection, anti-return air valve |
| Cleaning | Grease filter dishwasher-safe, stainless steel easy-wipe |
| Spare Parts | Grease filters, carbon filters, bulbs available |
| Design | Stainless steel finish, Italian design |
Frequently Asked Questions - AG90SS ILVE
How often should I clean the grease filter?
For optimal performance, clean the grease filter every 2-3 months. It can be washed in the dishwasher or by hand with warm soapy water. A clogged filter reduces suction and may cause odours.
Can the hood be used in recirculation mode?
Yes, the AG90SS can be used with a charcoal filter for recirculation. This is useful when you cannot vent outside. The charcoal filter should be replaced every 3-6 months.
How do I replace the charcoal filter?
Remove the grease filter, then insert the charcoal filter over the motor housing. Make sure it clicks into place. Reverse the procedure to remove it. Always switch off the hood before this operation.
What is the recommended installation height above a cooktop?
For gas cooktops, install the hood at 65-75 cm height. For electric cooktops, 60-70 cm is recommended. Follow the exact measurements in the manual to ensure efficient capture of fumes.
Why is my hood making too much noise?
Check if the grease filter is clogged or if the ducting is blocked. Excessive noise can also occur if the hood is not securely mounted. Ensure all screws are tightened and the ductwork is smooth.
How do I change the light bulb?
First, unplug the hood. Gently prise out the lamp holder and remove the old bulb. Install a new bulb of the same type and wattage (usually 20W halogen). Reinsert and test.
Can I control the hood speed electronically?
Yes, the AG90SS has electronic push buttons for three speeds. Press the button for the desired speed. Many models also include a boost function for rapid extraction.
Is the hood suitable for stainless steel cleaner spray?
Yes, use a soft cloth with standard stainless steel cleaner. Always wipe in the direction of the grain to avoid streaks. Do not use abrasive materials that may scratch.
Does the hood come with a warranty?
All ILVE products include a 2-year manufacturer's warranty. Keep your receipt and register the product online if possible. Spare parts are guaranteed available for at least 10 years.
What should I do if the hood does not start?
Check the power supply and the plug. Ensure that the circuit breaker hasn't tripped. If the control panel is unresponsive, the motherboard may be faulty; contact ILVE technical support.
User questions about AG90SS ILVE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual AG90SS - ILVE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AG90SS by ILVE.