18191 - Uncategorized Draper - Free user manual and instructions
Find the device manual for free 18191 Draper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Draper |
| Model | 18191 |
| Product Type | Impact Drill |
| Power Source | Corded Electric |
| Input Power | 710 W |
| No-Load Speed | 0-2800 rpm |
| Impact Rate | 0-44800 bpm |
| Chuck Type | 13 mm Keyed Chuck |
| Drilling Capacity - Steel | 13 mm |
| Drilling Capacity - Concrete | 13 mm |
| Drilling Capacity - Wood | 40 mm |
| Variable Speed Trigger | Yes |
| Forward/Reverse Rotation | Yes |
| Safety Features | Double insulated with lock-on button |
| Weight | 1.8 kg |
| Dimensions (L x W x H) | 280 x 210 x 85 mm |
| Cable Length | 2.5 m |
| Accessories Included | Chuck key, auxiliary handle, bit |
| Maintenance | Regular brush check and cleaning |
| Cleaning Instructions | Dry cloth only |
| Spare Parts | Available from Draper service centers |
| Repair | Authorized service centers |
| Manual Contents | 16 pages, safety and parts diagram |
Frequently Asked Questions - 18191 Draper
How do I change the drill bit?
To change the drill bit, first ensure the drill is unplugged. Insert the chuck key into one of the holes on the chuck and turn it counterclockwise to loosen the jaws. Remove the old bit, insert the new one, and tighten clockwise with the chuck key until secure. Always remove the chuck key before starting the drill.
How can I adjust the speed of the drill?
The speed can be adjusted by varying the pressure on the trigger. Light pressure provides lower RPM, while full pressure gives maximum speed. For more precise control, you can use the variable speed switch to set a lower maximum speed.
What safety precautions should I take when using the drill?
Always wear safety glasses and ear protection. Ensure the workpiece is securely clamped. Avoid contact with electrical wiring and use the side handle for control. Do not wear loose clothing and keep the cord away from the bit. Never operate the drill with damaged parts.
How do I switch between drilling and driving screws?
Use the forward/reverse switch to select rotation direction. For drilling, set it to forward. For driving screws, you may also use the screwdriver mode by turning off the impact function. Adjust the torque clutch if available to prevent over-tightening.
How should I clean and maintain the drill?
Keep the drill clean by wiping it with a dry cloth after each use. Do not use solvents. Ensure air vents are free from dust to prevent overheating. Periodically check the carbon brushes for wear and replace them when they are less than 6mm long.
Can the drill be used for mixing paint or mortar?
The drill is primarily designed for drilling and screwdriving. Using it for heavy mixing may overload the motor. If you need to mix, use a low speed setting and ensure the paddle is compatible. However, for prolonged mixing, a dedicated mixer is recommended.
What is the correct way to store the drill?
After cleaning, store the drill in a dry, cool place. Coil the cord loosely, keep the chuck key in a safe place, and optionally hang the drill on a wall bracket. Avoid storing in high humidity environments.
Why is the drill sparking inside the motor?
Some sparking is normal due to the motor brushes. If you notice excessive sparking, this indicates the carbon brushes may be worn out or the commutator is dirty. Replace the brushes or have the drill serviced at an authorized Draper center.
How do I know if the carbon brushes need replacing?
If the drill loses power, runs erratically, or excessive sparking occurs, the carbon brushes likely need replacing. Loosen the brush caps, remove the brushes, and if they are shorter than 6mm or heavily worn, install new genuine Draper brushes.
Is the Draper 18191 suitable for masonry drilling?
Yes, it has an impact drilling function. To drill into masonry, switch to impact mode (usually by sliding a collar on the chuck housing). Use a masonry bit and apply firm, steady pressure. The drilling capacity for concrete is 13mm.
User questions about 18191 Draper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 18191 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 18191 by Draper.
USER MANUAL 18191 Draper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draper
Model : 18191
Category : Uncategorized