DES692 - Speakers Diamond Audio - Free user manual and instructions
Find the device manual for free DES692 Diamond Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Car audio speaker |
| Speaker size | 6 x 9 inches (oval) |
| Speaker type | 2-way component system |
| Peak power handling | 300 watts |
| RMS power handling | 100 watts |
| Impedance | 4 ohms |
| Sensitivity | 92 dB @ 1W/1m |
| Frequency response | 30 Hz - 20 kHz |
| Cone material | Polypropylene with rubber surround |
| Tweeter type | 1-inch silk dome |
| Mounting depth | 2.75 inches (70 mm) |
| Cutout dimensions | 5.75 x 8.75 inches (146 x 222 mm) |
| Weight (single speaker) | 1.5 kg (3.3 lbs) |
| Recommended amplifier power | 50 - 150 watts RMS per channel |
| Installation location | Rear deck or door mounting |
| Grille included | Yes |
| Connection type | Standard 8-ohm compatible terminals |
| Voice coil | 1.5-inch high-temperature aluminum |
| Magnet type | Ferrite |
| Cleaning instructions | Wipe with a dry, soft cloth; avoid moisture |
| Maintenance | Periodic check of mounting screws and connections |
| Repairability | Replacement parts available; consult service center |
Frequently Asked Questions - DES692 Diamond Audio
What is the power handling capacity of the Diamond Audio DES692 speaker?
The speaker is rated at 100 watts RMS and can handle 300 watts peak. For best performance, pair it with an amplifier delivering 50 to 150 watts RMS per channel.
What is the impedance of the DES692?
The DES692 has an impedance of 4 ohms, making it compatible with most car audio head units and amplifiers.
How do I properly install the DES692 speaker?
Mount the speaker securely using the included grille and screws. Ensure the cutout dimensions are correct and that the mounting depth is sufficient. Connect the terminals to the corresponding positive and negative wires.
Can I use the DES692 in a marine or outdoor environment?
The DES692 is not specifically designed for marine use. Exposure to moisture may damage the speaker. For marine applications, look for speakers with a dedicated water-resistant rating.
What is the frequency response of this speaker?
The DES692 reproduces frequencies from 30 Hz to 20 kHz, covering deep bass to high treble for a balanced audio experience.
How do I clean and maintain the DES692?
Use a dry, soft cloth to gently wipe the grille and cone. Avoid using water or cleaning agents. Periodically check the mounting screws and wire connections to ensure they are tight.
Is a grille included with the speaker?
Yes, each DES692 speaker comes with a protective grille to shield the driver from damage.
What are the recommended mounting locations for the DES692?
The 6x9-inch size is ideal for rear deck installations, but can also be mounted in custom door panels or kick panels if proper clearance is ensured.
Can I use the DES692 without an external amplifier?
Yes, you can run it directly off a head unit, but an external amplifier will significantly improve sound quality and allow the speaker to reach its full potential.
What type of music is this speaker best suited for?
The DES692 offers a balanced frequency response, making it versatile for rock, pop, hip-hop, and classical music. Its 92 dB sensitivity ensures clear output even at moderate volumes.
User questions about DES692 Diamond Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speakers in PDF format for free! Find your manual DES692 - Diamond Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DES692 by Diamond Audio.
USER MANUAL DES692 Diamond Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Diamond Audio
Model : DES692
Category : Speakers