ID1.IW - Loudspeaker Induction Dynamics - Free user manual and instructions
Find the device manual for free ID1.IW Induction Dynamics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | In-wall loudspeaker |
| Brand | Induction Dynamics |
| Model | ID1.IW |
| Installation type | Flush-mount in-wall, fits standard drywall |
| Speaker configuration | 2-way system |
| Woofer diameter | 6.5 inches |
| Tweeter diameter | 1 inch |
| Impedance | 8 ohms |
| Frequency response | 55 Hz to 20 kHz |
| Sensitivity | 88 dB |
| Recommended amplifier power | 10 to 80 watts per channel |
| Power handling | 60 watts RMS, 120 watts peak |
| Dimensions | 11.8 x 8.9 x 3.5 inches |
| Cutout dimensions | 10.4 x 7.8 inches |
| Weight | 4.2 lb (1.9 kg) |
| Power supply | Passive, requires external amplifier |
| Main functions | Full-range sound, pivoting tweeter, paintable grille |
| Care and cleaning | Wipe with a dry soft cloth |
| Safety | Install away from electrical cables, use local regulations |
| Spare parts | Replacement grille, woofer, tweeter and mounting brackets |
| Repairability | Driver modules can be replaced by a qualified technician |
| General information | Ideal for home theater and multi-room music |
Frequently Asked Questions - ID1.IW Induction Dynamics
What type of speaker is the Induction Dynamics ID1.IW?
The ID1.IW is a passive in-wall loudspeaker designed for home theater and multi-room audio. It must be connected to an external amplifier or receiver.
How do I install the ID1.IW in a drywall wall?
Use the included template to mark the cutout, cut the drywall, run speaker wire to the location, connect the wire to the terminals, then insert the speaker and tighten the mounting screws so the clamps grip the wall.
Can the grille be painted to match my wall color?
Yes, the grille is paintable. Remove it, apply a light coat of thin water-based paint, let it dry completely, and reinstall it.
Does the ID1.IW work with a regular home amplifier?
Yes, it is a passive speaker with an impedance of 8 ohms. A stereo amplifier or receiver rated from 10 to 80 watts per channel is suitable.
What should I do if there is no sound coming from the speaker?
Check the amplifier output, ensure the speaker wire is firmly connected to the terminals, and verify that the source and volume settings are active. Also make sure the positive and negative wires are not reversed.
Is the ID1.IW suitable for outdoor use?
No, the ID1.IW is designed for indoor installation in drywall. For outdoor areas, use a weatherproof loudspeaker.
How do I clean and maintain the speaker?
Wipe the grille and frame with a dry soft cloth. Do not use water, cleaning sprays, or abrasive products. Periodically check that the mounting screws remain tight.
Are replacement parts available for the ID1.IW?
Yes, you can get replacement grilles, drivers, and mounting brackets through the manufacturer or authorized dealers. The woofer and tweeter can be replaced by a technician.
What is the recommended speaker wire size for installation?
For in-wall runs longer than 20 feet, use 16-gauge or 14-gauge speaker wire. Shorter runs can use 18-gauge wire. Ensure the wire is rated for in-wall use.
What safety precautions should I take during installation?
Turn off the amplifier before connecting wires, avoid contacting electrical cables in the wall, and follow local building and electrical codes. If using the speaker in a fire-rated wall, choose a suitable fire-rated back box.
User questions about ID1.IW Induction Dynamics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual ID1.IW - Induction Dynamics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ID1.IW by Induction Dynamics.
USER MANUAL ID1.IW Induction Dynamics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Induction Dynamics
Model : ID1.IW
Category : Loudspeaker