AG6503C3 - Uncategorized INTERMATIC - Free user manual and instructions
Find the device manual for free AG6503C3 INTERMATIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Time Switch / Programmable Timer |
| Brand | INTERMATIC |
| Model | AG6503C3 |
| Category | Electrical Control Device |
| Power Source | 120 Volt AC, 60 Hz |
| Switch Rating | 15 Amp, 125 Volt |
| Number of Programs | Multiple ON/OFF events per day |
| Manual Override | Yes |
| Mounting Type | Surface mount or standard junction box |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Dimensions | 3.5 x 2.5 x 2 inches (8.9 x 6.4 x 5.1 cm) |
| Weight | 0.5 pounds (0.23 kg) |
| Connection Type | Screw terminal wiring |
| Enclosure | Indoor-rated plastic housing |
| Applications | Automation of lights, fans, pumps, and other electrical loads |
| Maintenance | Wipe with a dry, soft cloth; no lubricants required |
| Repairability | Replaceable internal fuse (if equipped) |
| Safety Compliance | UL Listed for safe indoor use |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - AG6503C3 INTERMATIC
How do I install the AG6503C3?
Turn off the power at the circuit breaker. Connect the wires according to the wiring diagram in the manual. Use screw terminals for a secure connection. Mount the device securely in a junction box.
How do I set the time and program schedules?
After installation, set the current time by rotating the dial or using the clock buttons. Use the programming pins or buttons to define your desired ON/OFF times. Refer to the manual for detailed instructions.
What is the maximum load the timer can handle?
The AG6503C3 is rated for 15 amps at 125 volts, allowing control of most residential lighting and small appliances. Avoid exceeding the rated load to prevent damage.
Can I use this timer with LED lighting?
Yes, the timer works with LED bulbs as long as the total wattage does not exceed the rated capacity. For low-wattage LED loads, minimum load requirements may apply; check the specifications.
Does the device have a manual override?
Yes, the timer includes a manual override switch that allows you to temporarily turn the connected device ON or OFF without disturbing the programmed schedule.
What are the recommended maintenance practices?
Periodically inspect the wiring and terminals for tightness. Wipe the exterior with a dry, soft cloth to remove dust. Do not use water or cleaning solvents.
Is the timer suitable for outdoor use?
No, this model is rated for indoor use only. Install it in a dry location away from moisture. For outdoor applications, consider a weatherproof enclosure.
How do I reset the device?
To reset the timer, disconnect power for a few minutes, then restore it. If available, press the reset button. Your programmed schedules will be cleared; reprogram as needed.
What safety precautions should I follow during installation?
Always turn off the power at the circuit breaker before working. Ensure all connections are properly insulated and grounded. Follow local electrical codes and the provided manual.
What should I do if the timer does not turn on?
Check that the circuit breaker is on and the wiring is correct. Verify that the power source is active and the load is not faulty. If the issue persists, consult a qualified electrician or contact Intermatic support.
User questions about AG6503C3 INTERMATIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AG6503C3 - INTERMATIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AG6503C3 by INTERMATIC.
USER MANUAL AG6503C3 INTERMATIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INTERMATIC
Model : AG6503C3
Category : Uncategorized