Waveterminal 192M - Audio Equipment ESI - Free user manual and instructions
Find the device manual for free Waveterminal 192M ESI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | PCI Audio Interface |
| Brand | ESI |
| Model | Waveterminal 192M |
| Audio Resolution | 24-bit / 192 kHz |
| Number of Analog Inputs | 2 balanced/unbalanced line inputs |
| Number of Analog Outputs | 2 balanced/unbalanced line outputs |
| Digital I/O | S/PDIF coaxial and optical in/out |
| MIDI I/O | 1 MIDI input and 1 MIDI output |
| Headphone Output | 1 stereo front-panel headphone jack |
| Sampling Rates | 44.1, 48, 88.2, 96, 176.4, 192 kHz |
| Signal-to-Noise Ratio | 112 dB (A-weighted) |
| Total Harmonic Distortion + Noise | < 0.001% |
| Frequency Response | 20 Hz - 20 kHz ± 0.1 dB |
| Driver Support | Kernel streaming, ASIO 2.0, WDM, MME, DirectSound |
| Operating Systems | Windows XP/Vista/7/8/10 (32/64-bit), macOS (up to 10.15) |
| Host Connection | PCI 2.2 bus |
| Power Source | Powered through PCI slot |
| Dimensions | 170 x 107 mm (standard PCI card) |
| Weight | 250 g |
| Cleaning | Wipe the card with a soft, dry, antistatic cloth |
| Safety | Install only in grounded computer cases with proper ventilation |
| Repairability | No user-serviceable parts; contact ESI support for service |
| General Information | Breakout cable included for connectivity |
Frequently Asked Questions - Waveterminal 192M ESI
How do I install the ESI Waveterminal 192M drivers?
Download the latest driver from the ESI website and run the setup program. Shut down your computer, insert the card into an available PCI slot, then power on. Install the driver before or after insertion - the setup usually guides you. Restart and verify the device in your audio settings.
Is the Waveterminal 192M compatible with Windows 10?
ESI has released legacy drivers that work with Windows 10 in 32-bit and 64-bit versions. Use the WDM or ASIO driver for low-latency audio. Note that older PCI cards may require the legacy driver installation mode.
How can I reduce latency while recording?
Lower the ASIO buffer size in your DAW or the ESI control panel. Set it to 128 or 256 samples for most projects. We recommend using higher buffer sizes during mixdown to avoid dropouts.
Does the Waveterminal 192M work with macOS?
Yes, for older macOS versions up to OS X 10.15 Catalina. ESI offers Core Audio drivers for the 192M. After Catalina, support was discontinued, so check compatibility before purchasing or upgrading your Mac.
How do I connect studio monitors to the Waveterminal 192M?
The card comes with a breakout cable featuring balanced/unbalanced line outputs. Connect these to your monitors using TRS or RCA cables. If you need speaker balancing or volume control, you can use the headphone jack or set the output levels in the driver panel.
Can I use the Waveterminal 192M with MIDI devices?
Yes, the interface includes 1 MIDI input and 1 MIDI output on the breakout cable. Connect your synth or controller directly to the 5-pin DIN connectors. Install a MIDI driver if required by your OS.
Why is there no sound after installing the Waveterminal 192M?
Check that the card is securely seated in the PCI slot and the breakout cable is attached. Verify in your system’s audio settings that the Waveterminal 192M is selected as the default playback device. Also adjust the master volume in the ESI control panel and ensure the digital outputs are not muted.
How do I switch between analog and digital output configurations?
Use the ESI Waveterminal Control Panel to set the routing. You can select the source for the digital outputs (S/PDIF) and whether they mirror the analog outputs. The manual provides a routing diagram for analog, S/PDIF and MIDI signals.
What is the maximum sampling rate supported by the Waveterminal 192M?
The Waveterminal 192M supports sampling rates up to 192 kHz with a 24-bit resolution. This enables high-definition audio recording when using compatible software and converters.
How should I clean and maintain the Waveterminal 192M?
Always power off your computer before cleaning. Use a soft, dry, antistatic cloth to wipe the card and breakout cable. Do not use liquids or solvents. Periodically check the seating inside the PCI slot to ensure a stable connection.
User questions about Waveterminal 192M ESI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio Equipment in PDF format for free! Find your manual Waveterminal 192M - ESI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Waveterminal 192M by ESI.
USER MANUAL Waveterminal 192M ESI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ESI
Model : Waveterminal 192M
Category : Audio Equipment