CRDSNU-B-40-160-PPS-A-MG-A1 - Uncategorized Festo - Free user manual and instructions
Find the device manual for free CRDSNU-B-40-160-PPS-A-MG-A1 Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Festo |
| Model | CRDSNU-B-40-160-PPS-A-MG-A1 |
| Product Type | Pneumatic cylinder (round cylinder) |
| Bore Size | 40 mm |
| Stroke Length | 160 mm |
| Operating Mode | Double-acting |
| Cushioning | Self-adjusting pneumatic cushioning (PPS) |
| Position Sensing | Magnetic piston (MG) for proximity switches |
| Operating Pressure | 0.6 to 10 bar |
| Operating Medium | Filtered compressed air (unlubricated) |
| Ambient Temperature Range | -10 °C to +60 °C |
| Air Port Connection | G1/8 |
| Piston Rod Diameter | 16 mm |
| Piston Rod Thread | M10x1.25 |
| Weight | Approx. 1.5 kg |
| Mounting Type | Through-holes and accessory brackets |
| Power Supply | None (pneumatic drive) |
| Seal Material | NBR (nitrile rubber) |
| Cleaning | Wipe with damp cloth; use mild detergent |
| Maintenance | Regular seal inspection and lubrication if required |
| Safety | Do not exceed max pressure; use pressure regulator |
| Spare Parts | Seal kit and rod repair kit available |
| Repairability | Modular construction for easy replacement of parts |
Frequently Asked Questions - CRDSNU-B-40-160-PPS-A-MG-A1 Festo
What is the bore size of the Festo CRDSNU-B-40-160-PPS-A-MG-A1?
The bore size is 40 mm. This dimension determines the theoretical force output at a given operating pressure.
How long is the stroke of this cylinder?
The stroke length is 160 mm. It can be adjusted using mechanical stops in some installations.
What type of cushioning is used on this cylinder?
It features self-adjusting pneumatic cushioning (PPS) at the end positions, which absorbs impact and reduces noise.
Can I use the cylinder with lubricated air?
Yes, but it is factory-lubricated and can also run on unlubricated compressed air when filtered properly. If lubrication is added, it must be continuous.
What is the maximum operating pressure?
The maximum operating pressure is 10 bar. Use a pressure regulator to prevent overpressure.
How can I sense the piston position?
The cylinder has a magnetic piston (MG), allowing the use of external proximity switches (e.g., Festo types SMTSO or SMT-8) in the sensor grooves.
What maintenance does this cylinder require?
Regular inspection of the seals and rod surface, cleaning with a soft cloth, and occasional replacement of the seal kit. The cylinder is designed for low maintenance.
What should I do if the cylinder does not extend or retract?
Check the air supply pressure, the direction valve, and the exhaust flow. Also verify that the cylinder is not overloaded.
Are spare parts available for this model?
Yes, Festo offers repair kits containing seals and wiper rings. The rod and other parts can be ordered separately.
What is the operating temperature range?
The cylinder can operate in an ambient temperature range of -10 °C to +60 °C. For lower temperatures, special seals may be required.
User questions about CRDSNU-B-40-160-PPS-A-MG-A1 Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual CRDSNU-B-40-160-PPS-A-MG-A1 - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CRDSNU-B-40-160-PPS-A-MG-A1 by Festo.
USER MANUAL CRDSNU-B-40-160-PPS-A-MG-A1 Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : CRDSNU-B-40-160-PPS-A-MG-A1
Category : Uncategorized